From owner-acpi-jp@jp.freebsd.org  Sun Sep  2 14:05:07 2001
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id OAA60899;
	Sun, 2 Sep 2001 14:05:07 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from norikura.comp.sd.keio.ac.jp (gate1.comp.sd.keio.ac.jp [131.113.98.71])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with SMTP id OAA60894
	for <acpi-jp@jp.freebsd.org>; Sun, 2 Sep 2001 14:05:07 +0900 (JST)
	(envelope-from yakoh@sd.keio.ac.jp)
Received: (qmail 31101 invoked by uid 1110); 2 Sep 2001 05:04:30 -0000
Date: Sun, 2 Sep 2001 14:04:30 +0900
From: Takahiro Yakoh <yakoh@sd.keio.ac.jp>
To: acpi-jp@jp.freebsd.org
Cc: current@freebsd.org
Message-ID: <20010902140430.A3776%yakoh@sd.keio.ac.jp>
References: <200108300258.f7U2wxq06147@mass.dis.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <200108300258.f7U2wxq06147@mass.dis.org>
User-Agent: Mutt/1.3.19i-ja0
Reply-To: acpi-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+010328
X-Sequence: acpi-jp 1235
Subject: [acpi-jp 1235] panic in EcWaitEventIntr?(Re: HEADS UP: ACPI CHANGES AFFECTING MOST -CURRENT USERS)
Errors-To: owner-acpi-jp@jp.freebsd.org
Sender: owner-acpi-jp@jp.freebsd.org
X-Originator: yakoh@sd.keio.ac.jp

Hi.  My MPC-206 made panic with -current GENERIC kernel.
It can boot normaly with 'unset acpi_load'.
'dmesg' results as follows:

=====
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sun Sep  2 09:14:57 JST 2001
    root@fiva:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 597305278 Hz
CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 (597.31-MHz 586-class CPU)
  Origin = "GenuineTMx86"  Id = 0x543
real memory  = 117374976 (114624K bytes)
avail memory = 108556288 (106012K bytes)
Preloaded elf kernel "kernel" at 0xc0578000.
Preloaded elf module "acpi.ko" at 0xc057809c.
WARNING: Driver mistake: destroy_dev on 154/0
Using $PIR table, 10 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pci0: <memory, RAM> at 0.1 (no driver attached)
pci0: <memory, RAM> at 0.2 (no driver attached)
pci0: <multimedia, audio> at 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at 9.0 (no driver attached)
pcic0: <TI PCI-1420 PCI-CardBus Bridge> mem 0x10000000-0x10000fff irq 5 at device 10.0 on pci0
pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1420 PCI-CardBus Bridge> mem 0x10001000-0x10001fff irq 4 at device 10.1 on pci0
pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pci0: <serial bus, FireWire> at 11.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem 0xfc006800-0xfc0068ff irq 11 at device 12.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 08:00:74:50:32:4c
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci0: <AcerLabs Aladdin ATA33 controller> port 0x1800-0x180f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1ff at device 15.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at 17.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xd0000-0xd0fff irq 11 at device 20.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xd8000-0xdbfff on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 19077MB <IBM-DJSA-220> [38760/16/63] at ata0-master UDMA66
Mounting root from ufs:/dev/ad0s2a
acpi_ec0: EcRead: Failed waiting for EC to send data.
acpi_ec0: EcRead: Failed waiting for EC to send data.
acpi_ec0: EcRead: Failed waiting for EC to send data.
acpi_ec0: evaluation of GPE query method _Q09 failed - AE_AML_NO_OPERAND
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_ec0: EcRead: Failed waiting for EC to send data.
acpi_cmbat0: Battery info corrupted
acpi_ec0: EcRead: Failed waiting for EC to send data.
acpi_cmbat0: CANNOT FOUND _BST (12292)
acpi_ec0: EcWrite: Failed waiting for EC to process write command.
acpi_tz0: error fetching current temperature
acpi_ec0: EcRead: Failed waiting for EC to process read command.
acpi_tz0: error fetching current temperature
acpi_ec0: EcRead: Failed waiting for EC to process read command.
acpi_tz0: error fetching current temperature
acpi_ec0: EcRead: Failed waiting for EC to process read command.
acpi_tz0: error fetching current temperature
acpi_ec0: EcRead: Failed waiting for EC to process read command.
acpi_tz0: error fetching current temperature
acpi_ec0: EcWaitEventIntr called without EC lock!
panic: free: address 0xc7c3f136 out of range
