From owner-acpi-jp@jp.freebsd.org  Wed Sep 12 11:58:31 2001
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id LAA76756;
	Wed, 12 Sep 2001 11:58:31 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from nasu.utsunomiya-u.ac.jp (nasu.utsunomiya-u.ac.jp [160.12.128.3])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id LAA76747
	for <acpi-jp@jp.freebsd.org>; Wed, 12 Sep 2001 11:58:27 +0900 (JST)
	(envelope-from yokota@zodiac.mech.utsunomiya-u.ac.jp)
Received: from nantai.utsunomiya-u.ac.jp by nasu.utsunomiya-u.ac.jp (8.11.2/1.1.29.3/26Jan01-1134AM)
	id f8C2ve528826; Wed, 12 Sep 2001 11:57:40 +0900 (JST)
Received: from zodiac.mech.utsunomiya-u.ac.jp by nantai.utsunomiya-u.ac.jp (8.11.2/1.1.29.3/30Jan01-0241PM)
	id f8C2veu496236; Wed, 12 Sep 2001 11:57:40 +0900 (JST)
Received: from zodiac.mech.utsunomiya-u.ac.jp (IDENT:ZCzNQmIkhXBWwVdT8flChhPaZ5AlMChg@zodiac.mech.utsunomiya-u.ac.jp [160.12.43.7])
	by zodiac.mech.utsunomiya-u.ac.jp (8.9.3+3.2W/3.7W/zodiac-May2000) with ESMTP id MAA18748;
	Wed, 12 Sep 2001 12:07:26 +0900 (JST)
Message-Id: <200109120307.MAA18748@zodiac.mech.utsunomiya-u.ac.jp>
To: "David W. Chapman Jr." <dwcjr@inethouston.net>, acpi-jp@jp.freebsd.org
cc: yokota@zodiac.mech.utsunomiya-u.ac.jp
In-reply-to: Your message of "Tue, 11 Sep 2001 20:59:22 EST."
             <20010911205922.A33545@leviathan.inethouston.net> 
References: <20010911175808.A27841@leviathan.inethouston.net> <200109120157.KAA18565@zodiac.mech.utsunomiya-u.ac.jp>
	  <20010911205922.A33545@leviathan.inethouston.net> 
Date: Wed, 12 Sep 2001 12:07:25 +0900
From: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
Reply-To: acpi-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+010328
X-Sequence: acpi-jp 1271
Subject: [acpi-jp 1271] Re: ps/2 mouse problems [boot -v messages] 
Errors-To: owner-acpi-jp@jp.freebsd.org
Sender: owner-acpi-jp@jp.freebsd.org
X-Originator: yokota@zodiac.mech.utsunomiya-u.ac.jp

# I am sending this to acpi-jp@jp.FreeBSD.org.

Thank you for your prompt response.

My diagnosis is that the presense of the PS/2 mouse port is not reported
by the acpi module.  This is either

1. because ACPI in your motherboard BIOS is buggy, or
2. because the acpi module is not parsing ACPI resources properly.

The PnP BIOS is able to report the PS/2 mouse port (PNP0f13 in
your second dmesg output when the acpi module is not loaded).

I am afraid that you need to disable the acpi module until
our ACPI developers can find workaround for the buggy ACPI or
fix for the parser in the acpi module.

Kazu

>On Wed, Sep 12, 2001 at 10:57:31AM +0900, Kazutaka YOKOTA wrote:
>> Please send ENTIRE output, if possilbe, rather than partial exerpt.
>> Also send "boot -v" output when the acpi module is not loaded.
>> Please also tell which motherboard you have.
>> It would be also useful to dump ACPI data blocks using acpidump(8).
>> 
>I have a Gigabyte 7ZX with the FD revision of the bios(latest so far)
>
>-- 
>David W. Chapman Jr.
>dwcjr@inethouston.net	Raintree Network Services, Inc. <www.inethouston.net>
>dwcjr@freebsd.org	FreeBSD Committer <www.FreeBSD.org>
>
>--9amGYk9869ThD9tj
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: attachment; filename="acpi.dump"
>
>RSD PTR: Checksum=156, OEMID=AMI, RsdtAddress=0x0fff0000
>RSDT: Lenth=40, Revision=1, Checksum=184,
>	OEMID=AMIINT, OEM Table ID=, OEM Revision=0x11,
>	Creator ID=MSFT, Creator Revision=0x97
>	Entries={ 0x0fff0030 }
>	DSDT=0xfff00b0
>	INT_MODEL=PIC
>	SCI_INT=11
>	SMI_CMD=0x82f, ACPI_ENABLE=0xe1, ACPI_DISABLE=0x1e, S4BIOS_REQ=0x1f
>	PM1a_EVT_BLK=0x800-0x803
>	PM1a_CNT_BLK=0x804-0x805
>	PM2_TMR_BLK=0x808-0x80b
>	PM2_GPE0_BLK=0x820-0x823
>	P_LVL2_LAT=101ms, P_LVL3_LAT=1001ms
>	FLUSH_SIZE=1024, FLUSH_STRIDE=16
>	DUTY_OFFSET=0, DUTY_WIDTH=0
>	DAY_ALRM=125, MON_ALRM=126, CENTURY=50
>	Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}
>DSDT: Lenth=10878, Revision=1, Checksum=118,
>	OEMID=VIA, OEM Table ID=VT8371, OEM Revision=0x1000,
>	Creator ID=MSFT, Creator Revision=0x100000b
>Scope(\_PR_) {
>    Processor(CPU1, 1, 0x0, 0x0) {
>    }
>}
>OperationRegion(CS72, SystemIO, 0x72, 0x2)
>Field(CS72, ByteAcc, NoLock, Preserve) {
>    CI72,	8,
>    CO73,	8
>}
>Name(\_S0_, Package(0x4) {
>    0x0,
>    0x0,
>    0x0,
>    0x0,
>})
>Name(\_S1_, Package(0x4) {
>    0x4,
>    0x0,
>    0x0,
>    0x0,
>})
>Name(\_S4_, Package(0x4) {
>    0x2,
>    0x0,
>    0x0,
>    0x0,
>})
>Name(\_S5_, Package(0x4) {
>    0x2,
>    0x0,
>    0x0,
>    0x0,
>})
>Method(MCTH, 2) {
>    If(LLess(Sizeof(Arg0), Sizeof(Arg1))) {
>        Return(0x0)
>    }
>    Add(Sizeof(Arg0), 0x1, Local0)
>    Name(BUF0, Buffer(Local0) { })
>    Name(BUF1, Buffer(Local0) { })
>    Store(Arg0, BUF0)
>    Store(Arg1, BUF1)
>    While(Local0) {
>        Decrement(Local0)
>        If(LEqual(DerefOf(Index(BUF0, Local0, )), DerefOf(Index(BUF1, Local0, 
>)))) {
>        }
>        Else {
>            Return(Zero)
>        }
>    }
>    Return(One)
>}
>Scope(\_SB_) {
>    Name(APIC, 0x0)
>    Method(_PIC, 1) {
>        Store(Arg0, APIC)
>    }
>    Device(PWRB) {
>        Name(_HID, 0x0c0cd041)
>        Method(_STA) {
>            Return(0xb)
>        }
>    }
>    Device(PCI0) {
>        Name(_HID, 0x030ad041)
>        Name(_ADR, 0x0)
>        Name(_BBN, 0x0)
>        Name(SS3D, 0x2)
>        Name(CRS_, Buffer(0x88) {0x88, 0xd, 0x0, 0x2, 0xc, 0x0, 0x0, 0x0, 0x0,
> 0x0, 0xff, 0x0, 0x0, 0x0, 0x0, 0x1, 0x47, 0x1, 0xf8, 0xc, 0xf8, 0xc, 0x1, 0x8
>, 0x88, 0xd, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0xf7, 0xc, 0x0, 0x0, 0xf8
>, 0xc, 0x88, 0xd, 0x0, 0x1, 0xc, 0x3, 0x0, 0x0, 0x0, 0xd, 0xff, 0xff, 0x0, 0x0
>, 0x0, 0xf3, 0x87, 0x17, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xa
>, 0x0, 0xff, 0xff, 0xb, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2, 0x0, 0x87, 0x1
>7, 0x0, 0x0, 0xc, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc, 0x0, 0xff, 0xff, 0xd
>, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2, 0x0, 0x87, 0x17, 0x0, 0x0, 0xc, 0x3,
> 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x20, 0xff, 0xff, 0xdf, 0xff, 0x0, 0x0, 0x
>0, 0x0, 0x0, 0x0, 0xe0, 0xdf, 0x79, 0x0 })
>        OperationRegion(TMEM, PCI_Config, 0x57, 0x1)
>        Field(TMEM, ByteAcc, NoLock, Preserve) {
>            MEMT,	8
>        }
>        Name(TOM_, 0x0)
>        Method(MDET) {
>            If(TOM_) {
>            }
>            Else {
>                If(FLAG) {
>                    ShiftLeft(MEMT, 0x18, TOM_)
>                }
>                Else {
>                    Return(0x20000000)
>                }
>            }
>            Return(TOM_)
>        }
>        Method(TFCS) {
>            Subtract(MDET, 0x7fc0, Local0)
>            Return(Local0)
>        }
>        Name(FLAG, 0x1)
>        Name(OSFL, 0x1)
>        Method(_INI) {
>            \_SB_.PCI0.SBRG.IODT
>            If(MCTH) {
>                \_OS_
>                "Microsoft Windows"
>            }
>            Else {
>                If(MCTH) {
>                    \_OS_
>                    "Microsoft WindowsME: Millennium Edition"
>                }
>                Else {
>                    Store(0x0, OSFL)
>                }
>            }
>        }
>        Method(_REG, 2) {
>            If(LEqual(Arg0, 0x2)) {
>                Store(Arg1, FLAG)
>            }
>        }
>        Method(_CRS) {
>            CreateDWordField(CRS_, 0x76, TMEM)
>            CreateDWordField(CRS_, 0x82, TLEN)
>            Store(MDET, TMEM)
>            Subtract(0xffe00000, TMEM, TLEN)
>            Return(CRS_)
>        }
>        Name(_PRT, Package(0x1e) {
>            Package(0x4) {
>                0x0007ffff,
>                0x2,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x0007ffff,
>                0x3,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x0009ffff,
>                0x0,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x0009ffff,
>                0x1,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x0009ffff,
>                0x2,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x0009ffff,
>                0x3,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x000affff,
>                0x0,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x000affff,
>                0x1,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x000affff,
>                0x2,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x000affff,
>                0x3,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x000fffff,
>                0x0,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x000fffff,
>                0x1,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x000fffff,
>                0x2,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x000fffff,
>                0x3,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x000cffff,
>                0x0,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x000cffff,
>                0x1,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x000cffff,
>                0x2,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x000cffff,
>                0x3,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x000dffff,
>                0x0,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x000dffff,
>                0x1,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x000dffff,
>                0x2,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x000dffff,
>                0x3,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x0011ffff,
>                0x0,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x0011ffff,
>                0x1,
>                \_SB_.LNKD,
>                0x0,
>            },
>            Package(0x4) {
>                0x0011ffff,
>                0x2,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x0011ffff,
>                0x3,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x0001ffff,
>                0x0,
>                \_SB_.LNKA,
>                0x0,
>            },
>            Package(0x4) {
>                0x0001ffff,
>                0x1,
>                \_SB_.LNKB,
>                0x0,
>            },
>            Package(0x4) {
>                0x000effff,
>                0x0,
>                \_SB_.LNKC,
>                0x0,
>            },
>            Package(0x4) {
>                0x0010ffff,
>                0x0,
>                \_SB_.LNKD,
>                0x0,
>            },
>        })
>        Device(SBRG) {
>            Name(_ADR, 0x00070000)
>            Name(\_SB_.IPRS, Buffer(0x8) {0x30, 0x23, 0xf8, 0xde, 0x18, 0x38, 
>0x79, 0x0 })
>            OperationRegion(PIX0, PCI_Config, 0x55, 0x4)
>            OperationRegion(PIX1, PCI_Config, 0x85, 0x1)
>            OperationRegion(PIX2, PCI_Config, 0x50, 0x3)
>            OperationRegion(PIX3, PCI_Config, 0x8, 0x1)
>            Scope(\_SB_) {
>                Field(
>--9amGYk9869ThD9tj
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: attachment; filename="boot.acpi"
>
>Copyright (c) 1992-2001 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.0-CURRENT #4: Sun Sep  9 21:06:32 GMT 2001
>    poseiden@dwcjr.inethouston.net:/usr/obj/usr/src/sys/DWCJR
>Calibrating clock(s) ... TSC clock: 1102174905 Hz, i8254 clock: 1192830 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254"  frequency 1193182 Hz
>CLK_USE_TSC_CALIBRATION not specified - using old calibration method
>Timecounter "TSC"  frequency 1102506786 Hz
>CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
>  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
>PAT,PSE36,MMX,FXSR>
>  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
>Data TLB: 24 entries, fully associative
>Instruction TLB: 16 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>real memory  = 268369920 (262080K bytes)
>Physical memory chunk(s):
>0x00001000 - 0x0009efff, 647168 bytes (158 pages)
>0x00437000 - 0x0ffe7fff, 263917568 bytes (64433 pages)
>avail memory = 257085440 (251060K bytes)
>bios32: Found BIOS32 Service Directory header at 0xc00fdb40
>bios32: Entry = 0xfdb50 (c00fdb50)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0xdb71
>pnpbios: Found PnP BIOS data at 0xc00f7250
>pnpbios: Entry = f0000:6144  Rev = 1.0
>Other BIOS signatures found:
>Preloaded elf kernel "kernel" at 0xc0411000.
>Preloaded elf module "cd9660.ko" at 0xc04110a8.
>Preloaded elf module "msdosfs.ko" at 0xc0411148.
>Preloaded elf module "procfs.ko" at 0xc04111e8.
>Preloaded elf module "linux.ko" at 0xc0411288.
>Preloaded elf module "sysvshm.ko" at 0xc0411328.
>Preloaded elf module "sysvsem.ko" at 0xc04113c8.
>Preloaded elf module "sysvmsg.ko" at 0xc0411468.
>Preloaded elf module "if_xl.ko" at 0xc0411508.
>Preloaded elf module "miibus.ko" at 0xc04115a8.
>Preloaded elf module "snd_es137x.ko" at 0xc0411648.
>Preloaded elf module "snd_pcm.ko" at 0xc04116ec.
>Preloaded elf module "usb.ko" at 0xc041178c.
>Preloaded elf module "ugen.ko" at 0xc0411828.
>Preloaded elf module "bktr.ko" at 0xc04118c4.
>Preloaded elf module "bktr_mem.ko" at 0xc0411960.
>Preloaded elf module "agp.ko" at 0xc0411a00.
>Preloaded elf module "random.ko" at 0xc0411a9c.
>Preloaded elf module "atspeaker.ko" at 0xc0411b3c.
>Preloaded elf module "joy.ko" at 0xc0411be0.
>Preloaded elf module "fdc.ko" at 0xc0411c7c.
>Preloaded elf module "acpi.ko" at 0xc0411d18.
>bktr_mem: memory holder loaded
>random: <entropy source>
>null: <null device, zero device>
>mem: <memory & I/O>
>Pentium Pro MTRR support enabled
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
>Using $PIR table, 8 entries at 0xc00f78d0
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <AMIINT > on motherboard
>acpi0: power button is handled as a fixed feature programming model.
>Timecounter "ACPI"  frequency 3579545 Hz
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_cpu: CLK_VAL field overflows P_CNT register
>acpi_cpu: CLK_VAL field overlaps THT_EN bit
>acpi_tz0: <thermal zone> on acpi0
>acpi_button0: <Power Button> on acpi0
>acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: physical bus=0
>	map[10]: type 3, range 32, base e0000000, size 27, enabled
>found->	vendor=0x1106, dev=0x0305, revid=0x03
>	bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>found->	vendor=0x1106, dev=0x8305, revid=0x00
>	bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>found->	vendor=0x1106, dev=0x0686, revid=0x22
>	bus=0, slot=7, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
>found->	vendor=0x1106, dev=0x0571, revid=0x10
>	bus=0, slot=7, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000d400, size  5, enabled
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000d800, size  5, enabled
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>found->	vendor=0x1106, dev=0x3057, revid=0x30
>	bus=0, slot=7, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
>	map[14]: type 1, range 32, base dffff000, size 12, enabled
>found->	vendor=0x9004, dev=0x8778, revid=0x01
>	bus=0, slot=12, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=11
>	powerspec 1  supports D0 D3  current D0
>	map[10]: type 3, range 32, base dddfe000, size 12, enabled
>found->	vendor=0x109e, dev=0x036e, revid=0x02
>	bus=0, slot=13, func=0
>	class=04-00-00, hdrtype=0x00, mfdev=1
>	intpin=a, irq=9
>	map[10]: type 3, range 32, base dddff000, size 12, enabled
>found->	vendor=0x109e, dev=0x0878, revid=0x02
>	bus=0, slot=13, func=1
>	class=04-80-00, hdrtype=0x00, mfdev=1
>	intpin=a, irq=9
>	map[10]: type 4, range 32, base 0000d000, size  6, enabled
>found->	vendor=0x1274, dev=0x1371, revid=0x07
>	bus=0, slot=14, func=0
>	class=04-01-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=5
>	powerspec 1  supports D0 D2 D3  current D0
>	map[10]: type 4, range 32, base 0000cc00, size  7, enabled
>	map[14]: type 1, range 32, base dfffef80, size  7, enabled
>found->	vendor=0x10b7, dev=0x9055, revid=0x30
>	bus=0, slot=15, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=10
>	powerspec 1  supports D0 D1 D2 D3  current D0
>pci0: <PCI bus> on acpi_pcib0
>agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe7ffff
>ff at device 0.0 on pci0
>agp0: allocating GATT for aperture of size 256M
>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xa000-0xafff
>pcib1:   memory decode     0xdde00000-0xdfefffff
>pcib1:   prefetched decode 0xcdc00000-0xddcfffff
>pci1: physical bus=1
>	map[10]: type 1, range 32, base de000000, size 24, enabled
>	map[14]: type 3, range 32, base d0000000, size 27, enabled
>found->	vendor=0x10de, dev=0x0101, revid=0x10
>	bus=1, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=11
>	powerspec 1  supports D0 D3  current D0
>pci1: <PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci
>0
>ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
>ata0: mask=03 ostat0=50 ostat2=00
>ata0-master: ATAPI probe 00 00
>ata0-slave: ATAPI probe 00 00
>ata0: mask=03 stat0=50 stat1=00
>ata0-master: ATA probe 01 a5
>ata0: devices=01
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
>ata1: mask=03 ostat0=7f ostat2=50
>ata1-master: ATAPI probe 7f 7f
>ata1-slave: ATAPI probe 14 eb
>ata1: mask=03 stat0=7f stat1=00
>ata1-master: ATA probe 7f 7f
>ata1: devices=08
>ata1: at 0x170 irq 15 on atapci0
>uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on 
>pci0
>usb0: <VIA 83C572 USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on 
>pci0
>usb1: <VIA 83C572 USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
>ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdffff000-
>0xdfffffff irq 11 at device 12.0 on pci0
>ahc0: Reading SEEPROM...done.
>ahc0: internal 50 cable is present, internal 68 cable not present
>ahc0: external cable not present
>ahc0: BIOS eeprom is present
>ahc0: 68 pin termination Enabled
>ahc0: 50 pin termination Enabled
>ahc0: Downloading Sequencer Program... 431 instructions downloaded
>aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
>bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 9 at device 13.0 on pci0
>brooktree0: PCI bus latency is 64.
>bktr0: buffer size 3555328, addr 0x5000000
>bktr0: GPIO is 0x00ffffff
>bktr0: subsystem 0x1002 0x0001
>bktr0: Warning - card vendor 0x1002 (model 0x0001) unknown.
>bktr0: card signature:  00  00  00  00  00  00  00  00  01  00  01  00  01  00
>  00  00 
>
>bktr0: Detected a MSP3430G-A4 at 0x80
>bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo.
>pci0: <multimedia> at device 13.1 (no driver attached)
>pcm0: <Creative CT5880-A> port 0xd000-0xd03f irq 5 at device 14.0 on pci0
>pcm0: ac97 codec id 0x83847608 (SigmaTel STAC9708/9711)
>pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTe
>l 3D Enhancement
>pcm0: ac97 primary codec extended features surround DAC
>pcm: setmap 52d000, 1000; 0xc1679000 -> 52d000
>pcm: setmap 50f000, 1000; 0xc167b000 -> 50f000
>xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdfffef80-0xdf
>ffefff irq 10 at device 15.0 on pci0
>xl0: Ethernet address: 00:50:04:b7:13:09
>xl0: media options word: a
>xl0: found MII/AUTO
>miibus0: <MII bus> on xl0
>xlphy0: <3Com internal media interface> on miibus0
>xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>bpf: xl0 attached
>acpi_button1: <Sleep Button> on acpi0
>atspeaker0 port 0x61 on acpi0
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x41ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
>atkbd1: unable to allocate IRQ
>psm0: unable to allocate IRQ
>fdc0: <NEC 72065B or clone> port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>sio0: irq maps: 0x1 0x11 0x1 0x1
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 16550A
>sio1: irq maps: 0x1 0x9 0x1 0x1
>sio1 port 0x2f8-0x2ff irq 3 on acpi0
>sio1: type 16550A
>ppc0: using extended I/O port range
>ppc0: ECP SPP ECP+EPP SPP
>ppc0 port 0x778-0x77b,0x378-0x37f irq 7 on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>ppc1: cannot reserve I/O port range
>ppc1: cannot reserve I/O port range
>ata-: ata0 already exists, using ata2 instead
>ata-: ata1 already exists, using ata3 instead
>atkbdc-: atkbdc0 already exists, using atkbdc1 instead
>fdc-: fdc0 already exists, using fdc1 instead
>ppc-: ppc0 already exists, using ppc1 instead
>sc-: sc0 already exists, using sc1 instead
>sio-: sio0 already exists, using sio2 instead
>sio-: sio1 already exists, using sio3 instead
>sio-: sio2 already exists, using sio4 instead
>sio-: sio3 already exists, using sio5 instead
>vga-: vga0 already exists, using vga1 instead
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
>sc0: <System console> on isa0
>sc0: VGA <16 virtual consoles, flags=0x200>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>adv0 failed to probe on isa0
>aha0 failed to probe on isa0
>aic0 failed to probe on isa0
>ata2 failed to probe at port 0x1f0 irq 14 on isa0
>ata3 failed to probe at port 0x170 irq 15 on isa0
>atkbdc1: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0
>bt0 failed to probe on isa0
>cs0 failed to probe at port 0x300 on isa0
>ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
>fdc1: cannot reserve I/O port range (6 ports)
>fdc1 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
>fe0 failed to probe at port 0x300 on isa0
>ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
>le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
>lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
>pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
>pcic1: not probed (disabled)
>pmtimer0 on isa0
>ppc1: parallel port found at 0x378
>ppc1: cannot reserve I/O port range
>ppc1: <Parallel port> failed to probe at port 0x378-0x37f irq 7 on isa0
>sc1: no video adapter found.
>sc1: <System console> failed to probe at flags 0x100 on isa0
>sio2 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
>sio3 failed to probe at port 0x2f8 irq 3 on isa0
>sio4: not probed (disabled)
>sio5: not probed (disabled)
>sn0 failed to probe at port 0x300 irq 10 on isa0
>vga1: <Generic ISA VGA> failed to probe on isa0
>vt0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>BIOS Geometries:
> 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
>Device configuration finished.
>bpf: lo0 attached
>Linux ELF exec handler installed
>ad0: success setting UDMA4 on VIA chip
>Creating DISK ad0
>ad0: <IBM-DTLA-307075/TXAOA58A> ATA-5 disk at ata0-master
>ad0: 73308MB (150136560 sectors), 148945 C, 16 H, 63 S, 512 B
>ad0: 16 secs/int, 32 depth queue, tagged UDMA66
>ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
>ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
>ata1-slave: success setting PIO4 on generic chip
>acd0: <ATAPI 54X CDROM/VER-1.41> CDROM drive at ata1 as slave
>acd0: read 3437KB/s (32KB/s), 128KB buffer, PIO4
>acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
>acd0: Writes:
>acd0: Audio: play, 255 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: CD-ROM 120mm data disc
>Waiting 5 seconds for SCSI devices to settle
>(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
>(ahc0:A:3:0): Sending SDTR period c, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
>(ahc0:A:3:0): Sending SDTR period 19, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>pass0 at ahc0 bus 0 target 3 lun 0
>pass0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device 
>pass0: Serial Number 2J04032B
>pass0: 10.000MB/s transfers (10.000MHz, offset 15)
>Creating DISK cd0
>Mounting root from ufs:/dev/ad0s2a
>(ahc0:A:3:0): Sending SDTR period 19, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>(cd0:ahc0:0:3:0): error 6
>(cd0:ahc0:0:3:0): Unretryable Error
>cd0 at ahc0 bus 0 target 3 lun 0
>cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device 
>cd0: Serial Number 2J04032B
>cd0: 10.000MB/s transfers (10.000MHz, offset 15)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>ad0s1: type 0x1c, start 63, end = 61448624, size 61448562 : OK
>ad0s2: type 0xa5, start 61448625, end = 102398309, size 40949685 
>ad0s2: C/H/S start 1023/0/1 (16434495) != start 61448625: invalid
>start_init: trying /sbin/init
>pid 271 (syslogd), uid 0: exited on signal 6 (core dumped)
>
>--9amGYk9869ThD9tj
>Content-Type: text/plain; charset=us-ascii
>Content-Disposition: attachment; filename="dmesg.nonacpi"
>
>Copyright (c) 1992-2001 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.0-CURRENT #4: Sun Sep  9 21:06:32 GMT 2001
>    poseiden@dwcjr.inethouston.net:/usr/obj/usr/src/sys/DWCJR
>Calibrating clock(s) ... TSC clock: 1102211370 Hz, i8254 clock: 1192870 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254"  frequency 1193182 Hz
>CLK_USE_TSC_CALIBRATION not specified - using old calibration method
>Timecounter "TSC"  frequency 1102506233 Hz
>CPU: AMD Athlon(tm) Processor (1102.51-MHz 686-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x642  Stepping = 2
>  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
>PAT,PSE36,MMX,FXSR>
>  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
>Data TLB: 24 entries, fully associative
>Instruction TLB: 16 entries, fully associative
>L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
>L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
>real memory  = 268369920 (262080K bytes)
>Physical memory chunk(s):
>0x00001000 - 0x0009efff, 647168 bytes (158 pages)
>0x003f5000 - 0x0ffe7fff, 264187904 bytes (64499 pages)
>avail memory = 257359872 (251328K bytes)
>bios32: Found BIOS32 Service Directory header at 0xc00fdb40
>bios32: Entry = 0xfdb50 (c00fdb50)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xf0000+0xdb71
>pnpbios: Found PnP BIOS data at 0xc00f7250
>pnpbios: Entry = f0000:6144  Rev = 1.0
>Other BIOS signatures found:
>Preloaded elf kernel "kernel" at 0xc03cf000.
>Preloaded elf module "cd9660.ko" at 0xc03cf0a8.
>Preloaded elf module "msdosfs.ko" at 0xc03cf148.
>Preloaded elf module "procfs.ko" at 0xc03cf1e8.
>Preloaded elf module "linux.ko" at 0xc03cf288.
>Preloaded elf module "sysvshm.ko" at 0xc03cf328.
>Preloaded elf module "sysvsem.ko" at 0xc03cf3c8.
>Preloaded elf module "sysvmsg.ko" at 0xc03cf468.
>Preloaded elf module "if_xl.ko" at 0xc03cf508.
>Preloaded elf module "miibus.ko" at 0xc03cf5a8.
>Preloaded elf module "snd_es137x.ko" at 0xc03cf648.
>Preloaded elf module "snd_pcm.ko" at 0xc03cf6ec.
>Preloaded elf module "usb.ko" at 0xc03cf78c.
>Preloaded elf module "ugen.ko" at 0xc03cf828.
>Preloaded elf module "bktr.ko" at 0xc03cf8c4.
>Preloaded elf module "bktr_mem.ko" at 0xc03cf960.
>Preloaded elf module "agp.ko" at 0xc03cfa00.
>Preloaded elf module "random.ko" at 0xc03cfa9c.
>Preloaded elf module "atspeaker.ko" at 0xc03cfb3c.
>Preloaded elf module "joy.ko" at 0xc03cfbe0.
>Preloaded elf module "fdc.ko" at 0xc03cfc7c.
>bktr_mem: memory holder loaded
>null: <null device, zero device>
>mem: <memory & I/O>
>Pentium Pro MTRR support enabled
>random: <entropy source>
>pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003840
>pci_open(1a):	mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=03051106)
>Using $PIR table, 8 entries at 0xc00f78d0
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
>pci0: physical bus=0
>	map[10]: type 3, range 32, base e0000000, size 27, enabled
>found->	vendor=0x1106, dev=0x0305, revid=0x03
>	bus=0, slot=0, func=0
>	class=06-00-00, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>found->	vendor=0x1106, dev=0x8305, revid=0x00
>	bus=0, slot=1, func=0
>	class=06-04-00, hdrtype=0x01, mfdev=0
>found->	vendor=0x1106, dev=0x0686, revid=0x22
>	bus=0, slot=7, func=0
>	class=06-01-00, hdrtype=0x00, mfdev=1
>	map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
>found->	vendor=0x1106, dev=0x0571, revid=0x10
>	bus=0, slot=7, func=1
>	class=01-01-8a, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000d400, size  5, enabled
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=2
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>	map[20]: type 4, range 32, base 0000d800, size  5, enabled
>found->	vendor=0x1106, dev=0x3038, revid=0x10
>	bus=0, slot=7, func=3
>	class=0c-03-00, hdrtype=0x00, mfdev=0
>	intpin=d, irq=10
>	powerspec 2  supports D0 D3  current D0
>found->	vendor=0x1106, dev=0x3057, revid=0x30
>	bus=0, slot=7, func=4
>	class=0c-05-00, hdrtype=0x00, mfdev=0
>	powerspec 2  supports D0 D3  current D0
>	map[10]: type 4, range 32, base 0000dc00, size  8, enabled
>	map[14]: type 1, range 32, base dffff000, size 12, enabled
>found->	vendor=0x9004, dev=0x8778, revid=0x01
>	bus=0, slot=12, func=0
>	class=01-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=11
>	powerspec 1  supports D0 D3  current D0
>	map[10]: type 3, range 32, base dddfe000, size 12, enabled
>found->	vendor=0x109e, dev=0x036e, revid=0x02
>	bus=0, slot=13, func=0
>	class=04-00-00, hdrtype=0x00, mfdev=1
>	intpin=a, irq=9
>	map[10]: type 3, range 32, base dddff000, size 12, enabled
>found->	vendor=0x109e, dev=0x0878, revid=0x02
>	bus=0, slot=13, func=1
>	class=04-80-00, hdrtype=0x00, mfdev=1
>	intpin=a, irq=9
>	map[10]: type 4, range 32, base 0000d000, size  6, enabled
>found->	vendor=0x1274, dev=0x1371, revid=0x07
>	bus=0, slot=14, func=0
>	class=04-01-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=5
>	powerspec 1  supports D0 D2 D3  current D0
>	map[10]: type 4, range 32, base 0000cc00, size  7, enabled
>	map[14]: type 1, range 32, base dfffef80, size  7, enabled
>found->	vendor=0x10b7, dev=0x9055, revid=0x30
>	bus=0, slot=15, func=0
>	class=02-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=10
>	powerspec 1  supports D0 D1 D2 D3  current D0
>pci0: <PCI bus> on pcib0
>agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe0000000-0xe7ffff
>ff at device 0.0 on pci0
>agp0: allocating GATT for aperture of size 256M
>pcib1: <PCI-PCI bridge> at device 1.0 on pci0
>pcib1:   secondary bus     1
>pcib1:   subordinate bus   1
>pcib1:   I/O decode        0xa000-0xafff
>pcib1:   memory decode     0xdde00000-0xdfefffff
>pcib1:   prefetched decode 0xcdc00000-0xddcfffff
>pci1: physical bus=1
>	map[10]: type 1, range 32, base de000000, size 24, enabled
>	map[14]: type 3, range 32, base d0000000, size 27, enabled
>found->	vendor=0x10de, dev=0x0101, revid=0x10
>	bus=1, slot=0, func=0
>	class=03-00-00, hdrtype=0x00, mfdev=0
>	intpin=a, irq=11
>	powerspec 1  supports D0 D3  current D0
>pci1: <PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 7.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <VIA 82C686 ATA66 controller> port 0xffa0-0xffaf at device 7.1 on pci
>0
>ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
>ata0: mask=03 ostat0=50 ostat2=00
>ata0-master: ATAPI probe 00 00
>ata0-slave: ATAPI probe 00 00
>ata0: mask=03 stat0=50 stat1=00
>ata0-master: ATA probe 01 a5
>ata0: devices=01
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
>ata1: mask=03 ostat0=7f ostat2=50
>ata1-master: ATAPI probe 7f 7f
>ata1-slave: ATAPI probe 14 eb
>ata1: mask=03 stat0=7f stat1=00
>ata1-master: ATA probe 7f 7f
>ata1: devices=08
>ata1: at 0x170 irq 15 on atapci0
>uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 7.2 on 
>pci0
>usb0: <VIA 83C572 USB controller> on uhci0
>usb0: USB revision 1.0
>uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 10 at device 7.3 on 
>pci0
>usb1: <VIA 83C572 USB controller> on uhci1
>usb1: USB revision 1.0
>uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>pci0: <serial bus, SMBus> at device 7.4 (no driver attached)
>ahc0: <Adaptec 2940 Pro Ultra SCSI adapter> port 0xdc00-0xdcff mem 0xdffff000-
>0xdfffffff irq 11 at device 12.0 on pci0
>ahc0: Reading SEEPROM...done.
>ahc0: internal 50 cable is present, internal 68 cable not present
>ahc0: external cable not present
>ahc0: BIOS eeprom is present
>ahc0: 68 pin termination Enabled
>ahc0: 50 pin termination Enabled
>ahc0: Downloading Sequencer Program... 431 instructions downloaded
>aic7880: Ultra Wide Channel A, SCSI Id=7, 16/255 SCBs
>bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 9 at device 13.0 on pci0
>brooktree0: PCI bus latency is 64.
>bktr0: buffer size 3555328, addr 0x5000000
>bktr0: GPIO is 0x00ffffff
>bktr0: subsystem 0x1002 0x0001
>bktr0: Warning - card vendor 0x1002 (model 0x0001) unknown.
>bktr0: card signature:  00  00  00  00  00  00  00  00  01  00  01  00  01  00
>  00  00 
>
>bktr0: Detected a MSP3430G-A4 at 0x80
>bktr0: Pinnacle/Miro TV, Temic NTSC tuner, msp3400c stereo.
>pci0: <multimedia> at device 13.1 (no driver attached)
>pcm0: <Creative CT5880-A> port 0xd000-0xd03f irq 5 at device 14.0 on pci0
>pcm0: ac97 codec id 0x83847608 (SigmaTel STAC9708/9711)
>pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTe
>l 3D Enhancement
>pcm0: ac97 primary codec extended features surround DAC
>pcm: setmap 4c9000, 1000; 0xc1255000 -> 4c9000
>pcm: setmap 4cb000, 1000; 0xc1257000 -> 4cb000
>xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xcc00-0xcc7f mem 0xdfffef80-0xdf
>ffefff irq 10 at device 15.0 on pci0
>xl0: Ethernet address: 00:50:04:b7:13:09
>xl0: media options word: a
>xl0: found MII/AUTO
>miibus0: <MII bus> on xl0
>xlphy0: <3Com internal media interface> on miibus0
>xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>bpf: xl0 attached
>ata-: ata0 already exists, using ata2 instead
>ata-: ata1 already exists, using ata3 instead
>sc-: sc0 already exists, using sc1 instead
>vga-: vga0 already exists, using vga1 instead
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>pnpbios: 14 devices, largest 114 bytes
>PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
>PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
>PNP0c01: adding fixed memory32 range 0xec000-0xeffff, size=0x4000
>PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
>PNP0c01: adding fixed memory32 range 0x100000-0xffeffff, size=0xfef0000
>PNP0c01: adding fixed memory32 range 0xfff0000-0xfff7fff, size=0x8000
>PNP0c01: adding fixed memory32 range 0xfff8000-0xfffffff, size=0x8000
>PNP0c01: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000
>pnpbios: handle 0 device ID PNP0c01 (010cd041)
>PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1
>PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1
>PNP0000: adding irq mask 0x4
>pnpbios: handle 1 device ID PNP0000 (0000d041)
>PNP0200: adding dma mask 0x10
>PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1
>PNP0200: adding fixed io range 0x80-0x90, size=0x11, align=0x1
>PNP0200: adding fixed io range 0x94-0x9f, size=0xc, align=0x1
>PNP0200: adding fixed io range 0xc0-0xde, size=0x1f, align=0x1
>pnpbios: handle 2 device ID PNP0200 (0002d041)
>PNP0100: adding irq mask 0x1
>PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1
>pnpbios: handle 3 device ID PNP0100 (0001d041)
>PNP0b00: adding irq mask 0x100
>PNP0b00: adding fixed io range 0x70-0x71, size=0x2, align=0x1
>pnpbios: handle 4 device ID PNP0b00 (000bd041)
>PNP0303: adding irq mask 0x2
>PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1
>PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1
>pnpbios: handle 5 device ID PNP0303 (0303d041)
>PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1
>pnpbios: handle 6 device ID PNP0800 (0008d041)
>PNP0c04: adding irq mask 0x2000
>PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1
>pnpbios: handle 7 device ID PNP0c04 (040cd041)
>PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
>PNP0501: adding irq mask 0x10
>pnpbios: handle 8 device ID PNP0501 (0105d041)
>PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
>PNP0501: adding irq mask 0x8
>pnpbios: handle 9 device ID PNP0501 (0105d041)
>PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x4
>PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x4
>PNP0401: adding irq mask 0x80
>PNP0401: adding dma mask 0x8
>pnpbios: handle 10 device ID PNP0401 (0104d041)
>PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
>PNP0700: adding irq mask 0x40
>PNP0700: adding dma mask 0x4
>pnpbios: handle 11 device ID PNP0700 (0007d041)
>PNP0a03: adding io range 0x22-0x22, size=0x1, align=0x1
>PNP0a03: adding io range 0x72-0x75, size=0x4, align=0x1
>PNP0a03: adding io range 0x400-0x40f, size=0x10, align=0x1
>PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
>PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
>PNP0a03: adding io range 0x800-0x87f, size=0x80, align=0x1
>PNP0a03: adding io range 0xc00-0xc7f, size=0x80, align=0x1
>pnpbios: handle 12 device ID PNP0a03 (030ad041)
>PNP0f13: adding irq mask 0x1000
>pnpbios: handle 13 device ID PNP0f13 (130fd041)
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>orm0: <Option ROM> at iomem 0xc0000-0xca7ff on isa0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x41ab (2)
>sc0: <System console> on isa0
>sc0: VGA <16 virtual consoles, flags=0x200>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
>adv0 failed to probe on isa0
>aha0 failed to probe on isa0
>aic0 failed to probe on isa0
>ata2 failed to probe at port 0x1f0 irq 14 on isa0
>ata3 failed to probe at port 0x170 irq 15 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
>atkbd1: unable to allocate IRQ
>psm0: current command byte:0047
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0-00, 3 buttons
>psm0: config:00000000, flags:00000000, packet size:3
>psm0: syncmask:c0, syncbits:00
>bt0 failed to probe on isa0
>cs0 failed to probe at port 0x300 on isa0
>ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>fdc0: FIFO enabled, 8 bytes threshold
>fd0: <1440-KB 3.5" drive> on fdc0 drive 0
>fe0 failed to probe at port 0x300 on isa0
>ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
>le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
>lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
>pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
>pcic1: not probed (disabled)
>pmtimer0 on isa0
>ppc0: parallel port found at 0x378
>ppc0: using extended I/O port range
>ppc0: ECP SPP ECP+EPP SPP
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/8 bytes threshold
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>sc1: no video adapter found.
>sc1: <System console> failed to probe at flags 0x100 on isa0
>sio0: irq maps: 0x1 0x11 0x1 0x1
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1: irq maps: 0x1 0x9 0x1 0x1
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>sn0 failed to probe at port 0x300 irq 10 on isa0
>vga1: <Generic ISA VGA> failed to probe on isa0
>vt0 failed to probe on isa0
>isa_probe_children: probing PnP devices
>unknown: <PNP0303> can't assign resources
>unknown: <PNP0303> at port 0x60 on isa0
>atspeaker0: <AT speaker> at port 0x61 on isa0
>unknown: <PNP0501> can't assign resources
>unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
>unknown: <PNP0501> can't assign resources
>unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
>unknown: <PNP0401> can't assign resources
>unknown: <PNP0401> at port 0x378-0x37f on isa0
>unknown: <PNP0700> can't assign resources
>unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
>unknown: <PNP0f13> can't assign resources
>unknown: <PNP0f13> at irq 12 on isa0
>BIOS Geometries:
> 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
> 0 accounted for
>Device configuration finished.
>bpf: lo0 attached
>Linux ELF exec handler installed
>ad0: success setting UDMA4 on VIA chip
>Creating DISK ad0
>ad0: <IBM-DTLA-307075/TXAOA58A> ATA-5 disk at ata0-master
>ad0: 73308MB (150136560 sectors), 148945 C, 16 H, 63 S, 512 B
>ad0: 16 secs/int, 32 depth queue, tagged UDMA66
>ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
>ata1-slave: piomode=4 dmamode=2 udmamode=2 dmaflag=1
>ata1-slave: success setting PIO4 on generic chip
>acd0: <ATAPI 54X CDROM/VER-1.41> CDROM drive at ata1 as slave
>acd0: read 3437KB/s (32KB/s), 128KB buffer, PIO4
>acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
>acd0: Writes:
>acd0: Audio: play, 255 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: CD-ROM 120mm data disc
>Waiting 5 seconds for SCSI devices to settle
>(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
>(ahc0:A:3:0): Sending SDTR period c, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>ahc0: target 3 synchronous at 10.0MHz, offset = 0xf
>(ahc0:A:3:0): Sending SDTR period 19, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>pass0 at ahc0 bus 0 target 3 lun 0
>pass0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device 
>pass0: Serial Number 2J04032B
>pass0: 10.000MB/s transfers (10.000MHz, offset 15)
>Creating DISK cd0
>Mounting root from ufs:/dev/ad0s2a
>(ahc0:A:3:0): Sending SDTR period 19, offset f
>(ahc0:A:3:0): Received SDTR period 19, offset f
>	Filtered to period 19, offset f
>(cd0:ahc0:0:3:0): error 6
>(cd0:ahc0:0:3:0): Unretryable Error
>cd0 at ahc0 bus 0 target 3 lun 0
>cd0: <TEAC CD-R58S 1.0P> Removable CD-ROM SCSI-2 device 
>cd0: Serial Number 2J04032B
>cd0: 10.000MB/s transfers (10.000MHz, offset 15)
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>ad0s1: type 0x1c, start 63, end = 61448624, size 61448562 : OK
>ad0s2: type 0xa5, start 61448625, end = 102398309, size 40949685 
>ad0s2: C/H/S start 1023/0/1 (16434495) != start 61448625: invalid
>start_init: trying /sbin/init
>pid 272 (syslogd), uid 0: exited on signal 6 (core dumped)
>
>--9amGYk9869ThD9tj--
