From owner-acpi-jp@jp.FreeBSD.org Wed May  8 11:39:59 2002
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) id g482dxg29142;
	Wed, 8 May 2002 11:39:59 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from mercury.abq.com (mail.abq.com [204.252.57.241])
	by castle.jp.FreeBSD.org (8.11.6+3.4W/8.11.3) with ESMTP/inet id g482dwf29137
	for <acpi-jp@jp.freebsd.org>; Wed, 8 May 2002 11:39:58 +0900 (JST)
	(envelope-from kukl@mailtag.com)
Received: from mailtag.com (unverified [204.252.57.28]) by mercury.abq.com
 (Vircom SMTPRS 5.1.202) with ESMTP id <B0006018792@mercury.abq.com> for <acpi-jp@jp.freebsd.org>;
 Tue, 7 May 2002 20:39:42 -0600
Message-ID: <3CD88FE9.3000104@mailtag.com>
Date: Tue, 07 May 2002 20:39:37 -0600
From: Troy Ross <kukl@mailtag.com>
User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.0rc1) Gecko/20020502
X-Accept-Language: en-us, en
MIME-Version: 1.0
To: acpi-jp@jp.FreeBSD.org
Content-Type: multipart/mixed;
 boundary="------------060702010005060700070809"
Reply-To: acpi-jp@jp.FreeBSD.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+020417
X-Sequence: acpi-jp 1613
Subject: [acpi-jp 1613] acpi error on TP600e
Errors-To: owner-acpi-jp@jp.FreeBSD.org
Sender: owner-acpi-jp@jp.FreeBSD.org
X-Originator: kukl@mailtag.com

This is a multi-part message in MIME format.
--------------060702010005060700070809
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hello,
I got this address from a freebsd current newsgroup.

I'm running a current build of just a few days old.
After I'm giving a login prompt if a wait for 30sec I get this error.

ACPI-0428: *** Error:  Handler for [EmbeddedControl] returned AE_ERROR

the system remains useable.
Other times I get the same error but in addition I get a fatal trap 
while in kernel mode

Fatal trap 12: page fault while in kernel mode
fault virtual address        = 0x8400
fault code                   = supervisor read, page not present
instruction pointer          = 0x8:0xc0292ff3
stack pointer                = 0x10:0xc8e63c5c
frame pointer                = 0x10:0xc8e63c5c
code segment                 = base 0x0, limit 0xfffff, type 0x1b
                             = DPL 0, pres 1, def32 2, gran 1
processor eflags             = interupt enabled, resume, IOPL = 0
current process              = 21 (acpi_thermal)
kernel: type 12 trap, code=0
Stopped at    strcmp+0x1b:     cmpb    %al,0(%edx)
db>


obviously this all goes away if I disable acpi in the laoder

Included is the dmesg from when I just get the error.
Thanks,
Troy
Please let me know if you need any more info.         

--------------060702010005060700070809
Content-Type: text/plain;
 name="dmesg.1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.1"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Tue May  7 00:21:59 MDT 2002
    a3ot@pricklypear:/usr/obj/usr/src-current/src/sys/AMOLE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc059a000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc059a0a8.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 363961755 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (363.96-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66a  Stepping = 10
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134021120 (130880K bytes)
avail memory = 124309504 (121396K bytes)
Pentium Pro MTRR support enabled
pcibios: No call entry point
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP600R  > on motherboard
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_tz1: <thermal zone> on acpi0
acpi_tz2: <thermal zone> on acpi0
acpi_tz3: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <PCI bus> on acpi_pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcic0: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.0 on pci0
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC parallel isa irq]
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50101000-0x50101fff irq 11 at device 2.1 on pci0
pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC parallel isa irq]
pccard1: <PC Card bus (classic)> on pcic1
pci0: <multimedia, audio> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x8400-0x841f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 drq 3 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: 9590MB <IBM-DARA-212000> [20784/15/63] at ata0-master UDMA33
acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
    ACPI-0428: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
pccard: card inserted, slot 0
wi0 at port 0x240-0x27f irq 11 slot 0 on pccard0
wi0: 802.11 address: 00:02:2d:2b:a5:20
wi0: using Lucent Technologies, WaveLAN/IEEE
wi0: Lucent Firmware: Station 7.28.01

--------------060702010005060700070809--

