From owner-acpi-jp@jp.FreeBSD.org Mon May  5 23:22:06 2003
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id h45EM6T90135;
	Mon, 5 May 2003 23:22:06 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from mailbox.univie.ac.at (mail.univie.ac.at [131.130.1.27])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id h45EM3Y90130
	for <acpi-jp@jp.FreeBSD.org>; Mon, 5 May 2003 23:22:04 +0900 (JST)
	(envelope-from l.ertl@univie.ac.at)
Received: from pcle.cc.univie.ac.at (pcle.cc.univie.ac.at [131.130.2.107])
	by mailbox.univie.ac.at (8.12.2/8.12.2) with ESMTP id h45ELga2144114;
	Mon, 5 May 2003 16:21:51 +0200
From: Lukas Ertl <l.ertl@univie.ac.at>
To: acpi-jp@jp.FreeBSD.org
cc: Nate Lawson <nate@root.org>
In-Reply-To: <Pine.BSF.4.21.0305031039180.607-100000@root.org>
Message-ID: <20030505161620.H653@korben.in.tern>
References: <Pine.BSF.4.21.0305031039180.607-100000@root.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=ISO-8859-1
Content-Transfer-Encoding: QUOTED-PRINTABLE
X-DCC-ZID-Univie-Metrics: unet 4261; Body=2 Fuz1=2 Fuz2=2
Reply-To: acpi-jp@jp.FreeBSD.org
Precedence: list
Date: Mon, 5 May 2003 16:21:40 +0200
X-Sequence: acpi-jp 2175
Subject: [acpi-jp 2175] Re: HEADSUP: acpi 0228 in the tree
Sender: owner-acpi-jp@jp.FreeBSD.org
X-Originator: l.ertl@univie.ac.at
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+030405

Hi there,

FWIW, here's some info about the newest ACPI on my Thinkpad T20. I guess
the BIOS ist just plain broken, since it still doesn't work correctly.

(-s 3 turns off the screen, the disk and the fan, but the little half moon
led doesn't light up as it does with apm. Also, -s 3 only works the first
time after booting, then it just does nothing.)

<http://mailbox.univie.ac.at/~le/thinkpad.asl>
<http://mailbox.univie.ac.at/~le/thinkpad.dsdt>

FreeBSD korben 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Mon May  5 15:19:48
CEST 2003     le@korben:/usr/obj/usr/src/sys/KORBEN  i386

dmesg:

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
=09The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon May  5 15:19:48 CEST 2003
    le@korben:/usr/obj/usr/src/sys/KORBEN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc04f9000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc04f9200.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc04f9250.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04f92fc.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04f93a8.
Calibrating clock(s) ... i8254 clock: 1193171 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 696972791 Hz
Timecounter "TSC"  frequency 696972791 Hz
CPU: Intel Pentium III (696.97-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x683  Stepping =3D 3
  Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  =3D 268369920 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000520000 - 0x000000000fb49fff, 258121728 bytes (63018 pages)
avail memory =3D 255225856 (243 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f71f0
bios32: Entry =3D 0xfd820 (c00fd820)  Rev =3D 0  Len =3D 1
pcibios: PCI BIOS entry at 0xfd7b0+0x19f
pnpbios: Found PnP BIOS data at 0xc00f7220
pnpbios: Entry =3D f0000:b1fc  Rev =3D 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pci_open(1):=09mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a):=09mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck:=09device 0 [class=3D060000] [hdr=3D00] is there (id=3D7190808=
6)
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdee0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    7    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    7    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    5    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    3    A   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      0    3    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    4    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      8    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    8    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    8    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
ACPI timer looks BAD  min =3D 2, max =3D 6, width =3D 4
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.1.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.3.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.3.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.5.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.7.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.1.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.3.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.3.1
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.5.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.7.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=3D0
=09map[10]: type 3, range 32, base f8000000, size 26, enabled
found->=09vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
=09bus=3D0, slot=3D0, func=3D0
=09class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0106, statreg=3D0x2210, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
found->=09vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
=09bus=3D0, slot=3D1, func=3D0
=09class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
=09cmdreg=3D0x001f, statreg=3D0x0220, cachelnsz=3D0 (dwords)
=09lattimer=3D0x80 (3840 ns), mingnt=3D0x8c (35000 ns), maxlat=3D0x00 (0 ns=
)
=09map[10]: type 1, range 32, base 50000000, size 12, enabled
found->=09vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
=09bus=3D0, slot=3D2, func=3D0
=09class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 =
ns)
=09intpin=3Da, irq=3D11
=09powerspec 1  supports D0 D1 D2 D3  current D0
=09map[10]: type 1, range 32, base 50100000, size 12, enabled
found->=09vendor=3D0x104c, dev=3D0xac1b, revid=3D0x03
=09bus=3D0, slot=3D2, func=3D1
=09class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1
=09cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0xc0 (48000 ns), maxlat=3D0x03 (750 =
ns)
=09intpin=3Db, irq=3D11
=09powerspec 1  supports D0 D1 D2 D3  current D0
=09map[10]: type 1, range 32, base e8120000, size 12, enabled
=09map[14]: type 4, range 32, base 00001800, size  6, enabled
=09map[18]: type 1, range 32, base e8100000, size 17, enabled
found->=09vendor=3D0x8086, dev=3D0x1229, revid=3D0x09
=09bus=3D0, slot=3D3, func=3D0
=09class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0017, statreg=3D0x0290, cachelnsz=3D8 (dwords)
=09lattimer=3D0x42 (1980 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x38 (14000=
 ns)
=09intpin=3Da, irq=3D11
=09powerspec 2  supports D0 D1 D2 D3  current D0
=09map[10]: type 4, range 32, base 00001840, size  3, enabled
=09map[14]: type 1, range 32, base e8121000, size 12, enabled
found->=09vendor=3D0x115d, dev=3D0x000c, revid=3D0x00
=09bus=3D0, slot=3D3, func=3D1
=09class=3D07-00-02, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x0003, statreg=3D0x0210, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Da, irq=3D11
=09powerspec 2  supports D0 D1 D2 D3  current D0
=09map[10]: type 1, range 32, base e8122000, size 12, enabled
=09map[14]: type 1, range 32, base e8000000, size 20, enabled
found->=09vendor=3D0x1013, dev=3D0x6003, revid=3D0x01
=09bus=3D0, slot=3D5, func=3D0
=09class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0002, statreg=3D0x0410, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x18 (6000 =
ns)
=09intpin=3Da, irq=3D11
=09powerspec 2  supports D0 D1 D2 D3  current D0
found->=09vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
=09bus=3D0, slot=3D7, func=3D0
=09class=3D06-80-00, hdrtype=3D0x00, mfdev=3D1
=09cmdreg=3D0x000f, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 00001850, size  4, enabled
found->=09vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
=09bus=3D0, slot=3D7, func=3D1
=09class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09map[20]: type 4, range 32, base 00001860, size  5, enabled
found->=09vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
=09bus=3D0, slot=3D7, func=3D2
=09class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
=09intpin=3Dd, irq=3D11
=09map[90]: type 4, range 32, base 00001040, size  4, enabled
found->=09vendor=3D0x8086, dev=3D0x7113, revid=3D0x03
=09bus=3D0, slot=3D7, func=3D3
=09class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0003, statreg=3D0x0280, cachelnsz=3D0 (dwords)
=09lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff=
 at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xf0000000-0xf7ffffff
pcib1:   prefetched decode 0xfff00000-0xfffff
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=3D1
=09map[10]: type 1, range 32, base f0000000, size 27, enabled
found->=09vendor=3D0x5333, dev=3D0x8c12, revid=3D0x11
=09bus=3D1, slot=3D0, func=3D0
=09class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
=09cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D8 (dwords)
=09lattimer=3D0x40 (1920 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0xff (63750=
 ns)
=09intpin=3Da, irq=3D11
=09powerspec 1  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at devic=
e 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at devic=
e 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1800-0x183f=
 mem 0xe8100000-0xe811ffff,0xe8120000-0xe8120fff irq 11 at device 3.0 on pc=
i0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:b3:04:8d:3b
fxp0: PCI IDs: 8086 1229 8086 2408 0009
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pci0: <simple comms, UART> at device 3.1 (no driver attached)
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xe8000000-0xe80fffff,0xe812=
2000-0xe8122fff irq 11 at device 5.0 on pci0
csa: card is Thinkpad 600X/A20/T20
pcm0: <CS461x PCM Audio> on csa0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id =3D 0x43525914)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume=
, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 6c7000, 1000; 0xc25f3000 -> 6c7000
pcm0: sndbuf_setmap 685000, 1000; 0xc25f1000 -> 685000
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1850-0x185f at device 7.1 o=
n pci0
ata0: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=3D03 stat0=3D50 stat1=3D00
ata0-master: ATA 01 a5
ata0: devices=3D01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=3D03 ostat0=3D50 ostat2=3D00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=3D03 stat0=3D00 stat1=3D00
ata1: devices=3D04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 =
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 1 4 6 9
ppc0: using extended I/O port range
unknown: not probed (disabled)
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 1 4 6 9
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x241 0x241 0x241 0x241
sio0: probe failed test(s): 1 4 6 9
ppc0: using extended I/O port range
unknown: not probed (disabled)
sio0: irq maps: 0x241 0x241 0x241 0x241
sio0: probe failed test(s): 1 4 6 9
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xcc000-0xcd7ff,0xc0000-0xcbff=
f on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x241 0x241 0x241 0x241
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x241 0x241 0x241 0x241
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
acpi_acad0: Off Line
ad0: success setting UDMA33 on Intel PIIX4 chip
ad0: <TOSHIBA MK2017GAP/A5.04 H> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=3D12 dmamode=3D34 udmamode=3D69 cblid=3D1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=3D12 dmamode=3D34 udmamode=3D66 dmaflag=3D1
ata1-master: success setting UDMA33 on Intel PIIX4 chip
acd0: <TOSHIBA DVD-ROM SD-C2302/1127> DVD-ROM drive at ata1 as master
acd0: read 981KB/s (34515KB/s), 128KB buffer, UDMA33
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R
acd0: Writes:
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/239/63 s:63 l:19534977
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/239/63 s:19535040 l:1953504=
0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10001908224 end 10001940479
GEOM: Configure ad0s2, start 10001940480 length 10001940480 end 20003880959
WARNING: Expected rawoffset 19535040, found 0
GEOM: Configure ad0s2a, start 0 length 157286400 end 157286399
GEOM: Configure ad0s2b, start 157286400 length 536870912 end 694157311
GEOM: Configure ad0s2c, start 0 length 10001940480 end 10001940479
GEOM: Configure ad0s2e, start 694157312 length 838860800 end 1533018111
GEOM: Configure ad0s2f, start 1533018112 length 524288000 end 2057306111
GEOM: Configure ad0s2g, start 2057306112 length 7944634368 end 10001940479
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
system power profile changed to 'performance'
acpi_cpu0: set speed to 100.0%
acpi_acad0: On Line
acpi_tz0: switched from NONE to _AC1: 67.0C
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
acpi_acad0: Off Line
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BA=
T0._STA] (Node 0xc25bc4c0), AE_ERROR
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BA=
T0._STA] (Node 0xc25bc4c0), AE_ERROR
acpi_ec0: EcRead: Failed waiting for EC to send data.
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BA=
T1._STA] (Node 0xc25bc320), AE_ERROR
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BA=
T1._STA] (Node 0xc25bc320), AE_ERROR
acpi_ec0: EcWaitEventIntr called without EC lock!
acpi_cmbat0: battery initialization done, tried 2 times
acpi_cmbat1: battery initialization done, tried 2 times
system power profile changed to 'performance'
acpi_cpu0: set speed to 100.0%
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 3 times
Linux ELF exec handler installed

pciconf -l:

agp0@pci0:0:0:=09class=3D0x060000 card=3D0x00000000 chip=3D0x71908086 rev=
=3D0x03 hdr=3D0x00
pcib1@pci0:1:0:=09class=3D0x060400 card=3D0x00000000 chip=3D0x71918086 rev=
=3D0x03 hdr=3D0x01
cbb0@pci0:2:0:=09class=3D0x060700 card=3D0x01301014 chip=3D0xac1b104c rev=
=3D0x03 hdr=3D0x02
cbb1@pci0:2:1:=09class=3D0x060700 card=3D0x01301014 chip=3D0xac1b104c rev=
=3D0x03 hdr=3D0x02
fxp0@pci0:3:0:=09class=3D0x020000 card=3D0x24088086 chip=3D0x12298086 rev=
=3D0x09 hdr=3D0x00
none0@pci0:3:1:=09class=3D0x070002 card=3D0x24088086 chip=3D0x000c115d rev=
=3D0x00 hdr=3D0x00
csa0@pci0:5:0:=09class=3D0x040100 card=3D0x01531014 chip=3D0x60031013 rev=
=3D0x01 hdr=3D0x00
isab0@pci0:7:0:=09class=3D0x068000 card=3D0x00000000 chip=3D0x71108086 rev=
=3D0x02 hdr=3D0x00
atapci0@pci0:7:1:=09class=3D0x010180 card=3D0x00000000 chip=3D0x71118086 re=
v=3D0x01 hdr=3D0x00
uhci0@pci0:7:2:=09class=3D0x0c0300 card=3D0x00000000 chip=3D0x71128086 rev=
=3D0x01 hdr=3D0x00
none1@pci0:7:3:=09class=3D0x068000 card=3D0x00000000 chip=3D0x71138086 rev=
=3D0x03 hdr=3D0x00
none2@pci1:0:0:=09class=3D0x030000 card=3D0x017f1014 chip=3D0x8c125333 rev=
=3D0x11 hdr=3D0x00

--=20
Lukas Ertl                             eMail: l.ertl@univie.ac.at
UNIX-Systemadministrator               Tel.:  (+43 1) 4277-14073
Zentraler Informatikdienst (ZID)       Fax.:  (+43 1) 4277-9140
der Universit=E4t Wien                   http://mailbox.univie.ac.at/~le/
