From owner-acpi-jp@jp.FreeBSD.org Fri Sep  5 03:32:35 2003
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id h84IWZS67569;
	Fri, 5 Sep 2003 03:32:35 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from postal2.es.net (proxy.es.net [198.128.3.206])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id h84IWYw67564
	for <acpi-jp@jp.freebsd.org>; Fri, 5 Sep 2003 03:32:35 +0900 (JST)
	(envelope-from oberman@es.net)
Received: from ptavv.es.net ([198.128.4.29])
        by postal2.es.net (Postal Node 2) with ESMTP (SSL) id MUA74016
        for <acpi-jp@jp.freebsd.org>; Thu, 04 Sep 2003 11:32:29 -0700
Received: from ptavv (localhost [127.0.0.1])
	by ptavv.es.net (Tachyon Server) with ESMTP id AAE845D08
	for <acpi-jp@jp.freebsd.org>; Thu,  4 Sep 2003 11:32:29 -0700 (PDT)
X-Mailer: exmh version 2.6.3 04/04/2003 with nmh-1.0.4
To: acpi-jp@jp.FreeBSD.org
Mime-Version: 1.0
Content-Type: multipart/mixed ;
	boundary="==_Exmh_12653052760"
From: "Kevin Oberman" <oberman@es.net>
Message-Id: <20030904183229.AAE845D08@ptavv.es.net>
Reply-To: acpi-jp@jp.FreeBSD.org
Precedence: list
Date: Thu, 04 Sep 2003 11:32:29 -0700
X-Sequence: acpi-jp 2645
Subject: [acpi-jp 2645] ACPI related regression and panics
Sender: owner-acpi-jp@jp.FreeBSD.org
X-Originator: oberman@es.net
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+030902

This is a multipart MIME message.

--==_Exmh_12653052760
Content-Type: text/plain; charset=us-ascii

Since my recent update to CURRENT on Tuesday 9/2, I have been having
more serious issues with ACPI on my IBM T30. It used to almost work,
but I am now getting frequent lock-ups in X and after a resume.

My asl and dsdt files are available at:
ftp://ftp1.es.net/pub/piblic-domain/acpi/ and are bz2 files.

The dmesg is (with hw.acpi.verbose: 1) attached.

The panics are new since my previous update of current which was a
couple of weeks ago...prior to several ACPI updates and the integration
of ATAng.

When I suspend, the display backlight stays on (previously reported)
and the "suspended" LED on the unit never illuminates. When I resume,
the normal resumption messages about USB failing are printed, but I
don't get the usual messages about the system resuming, just "ATA
resetting...".  The system then locks hard with the disk access LED
illuminated. Only a full reset (power button for 5 seconds) will break
it from this mode.

After a single-mode reboot, fsck is often clean but does find an error
or two on occasion.

If I start X, the system usually locks up the same way during Gnome
startup. I can't even get back to vty0 to see if there are any
messages.

If I try to hibernate (suspend to disk), the system also locks up with
the following message:
======== acpi_printcpu() debug_dump ========
gdt[007:c047c400] idt[0407:c047c7a0] ldt[0028] tr[0020] efl[000000086]
eax[00047000] ebx[c152dc00] ecx[00000000] edx[bfc0011c]
esi[00000000] edi[c153ccb0] ebp[dd5a4aa4] esp[dd5a4a6c]
cr0[8005003b] cr2[280bba78] cr3[16d6e000] cr4[00000691]
cs[0008] ds[0010] es[0010] fs[0018] gs[002f] ss[0010]

In the past, it simply beeped as I have no hibernation partition on my
disk.

In the version of two weeks ago, only the back-light problem
existed.

Thanks,
-- 
R. Kevin Oberman, Network Engineer
Energy Sciences Network (ESnet)
Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
E-mail: oberman@es.net			Phone: +1 510 486-8634


--==_Exmh_12653052760
Content-Type: text/plain ; name="dmesg.T30"; charset=us-ascii
Content-Description: dmesg.T30
Content-Disposition: attachment; filename="dmesg.T30"

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #31: Tue Sep  2 15:12:30 PDT 2003
    root@:/usr/obj/usr/src/sys/IBM-T30-D
Preloaded elf kernel "/boot/kernel/kernel" at 0xc055d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc055d26c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc055d2bc.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz (1798.48-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory  = 536281088 (511 MB)
avail memory = 514949120 (491 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP-1I   > on motherboard
acpi_ec0: <embedded controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_tz0: <thermal zone> port 0x530-0x537 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 11
pcib0: slot 29 INTC is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
pcib0: slot 31 INTB is routed to irq 11
agp0: <Intel 82845 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: NEC Corporation USB2.0 Hub Controller, class 9/0, rev 2.00/1.00, addr 2
uhub1: 4 ports with 4 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 11
pcib2: slot 0 INTB is routed to irq 11
pcib2: slot 2 INTA is routed to irq 11
pcib2: slot 8 INTA is routed to irq 11
cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2
start (50000000) < sc->membase (d0200000)
start (50000000) < sc->pmembase (f0000000)
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2
start (51000000) < sc->membase (d0200000)
start (51000000) < sc->pmembase (f0000000)
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci2: <network> at device 2.0 (no driver attached)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:09:6b:50:36:29
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 11 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at device 31.5 on pci0
pcm0: <Analog Devices AD1881A AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> flags 0x2000 irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
acpi_ec0: Changing GLK from 1 to 0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1798482952 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 25 us
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 45 us
acpi_ec0: info: new max delay is 50 us
acpi_ec0: info: new max delay is 120 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
GEOM: create disk ad0 dp=0xc41d1370
ad0: 38154MB <TOSHIBA MK4019GAX> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <DW-28E> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC DW-28E 2.1A> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: cd present [1 x 0 byte records]
Mounting root from ufs:/dev/ad0s3a

--==_Exmh_12653052760--


