From owner-acpi-jp@jp.FreeBSD.org Sat Mar 27 12:25:30 2004
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id i2R3PUv11283;
	Sat, 27 Mar 2004 12:25:30 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from mail502.nifty.com (mail502.nifty.com [202.248.37.210])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id i2R3PTd11276
	for <acpi-jp@jp.FreeBSD.org>; Sat, 27 Mar 2004 12:25:29 +0900 (JST)
	(envelope-from ko.nonomura@tumbleweed.com)
Received: from mars2.valicert.co.jp.nifty.com (ntkngw093249.kngw.nt.adsl.ppp.infoweb.ne.jp [220.209.101.249])by mail502.nifty.com with ESMTP id i2R3PMG5018355
	for <acpi-jp@jp.FreeBSD.org>; Sat, 27 Mar 2004 12:25:22 +0900
Message-ID: <86n063ug3j.wl@nifty.com>
From: Ko Nonomura <nonomura@nifty.com>
To: acpi-jp@jp.FreeBSD.org
User-Agent: Wanderlust/2.10.1 (Watching The Wheels) SEMI/1.14.5 (Awara-Onsen) FLIM/1.14.5 (Demachiyanagi) APEL/10.6 Emacs/20.7 (i386--freebsd) MULE/4.0 (HANANOEN)
MIME-Version: 1.0 (generated by SEMI 1.14.5 - "Awara-Onsen")
Content-Type: text/plain; charset=US-ASCII
Reply-To: acpi-jp@jp.FreeBSD.org
Precedence: list
Date: Sat, 27 Mar 2004 12:24:48 +0900
X-Sequence: acpi-jp 3152
Subject: [acpi-jp 3152] ACPI on ThinkPad X40
Sender: owner-acpi-jp@jp.FreeBSD.org
X-Originator: nonomura@nifty.com
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+040307

Hello,

I installed FreeBSD 5.2.1 to ThinkPad X40 and have some problem about
ACPI.  If I use it with Ultrabase X4, it works fine, but without it,
couple of issues come. 

I am also tring disable ACPI, enable APM, etc.  Most cases works
only when ultrabase X4 is used.


Here is my configuration.
System Name : ThinkPad 40(2371-7VJ)
OS : FreeBSD 5.2.1-Release-P3
Kernel cnfiguration: Generic, but APIC disabled

/etc/sysctl.conf
hw.acpi.disable_on_poweroff=0
kern.ipc.shm_allow_removed=1

*) ACPI enabled / without ultrabase X4
Shutdown -h/-r: NG, stops after
Uptime: 1m18s
Shutting down ACPI

Shutdown -p: NG, stops after
Uptime: 1m18s
Powering system off using ACPI

acpiconf -s 3: Hang up

*) ACPI enabled / with ultrabase X4
Shutdown -h/-r/-p: OK
acpiconf -s 3: It suspends, but when restarting, usb's error message
                comes

Below is some information which requested at
(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html)

*) Boot -v with ultrabase X4

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p1 #2: Sat Mar 27 02:09:14 JST 2004
    nono@mars3.valicert.com:/usr/obj/usr/src/sys/MARS3
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a30000.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc0a302c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a30370.
Calibrating clock(s) ... i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1196123274 Hz
CPU: Intel(R) Pentium(R) M processor 1200MHz (1196.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 1064173568 (1014 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003e4e2fff, 1032572928 bytes (252093 pages)
avail memory = 1024253952 (976 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6fc0
bios32: Entry = 0xfd740 (c00fd740)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd6d0+0x1f8
pnpbios: Found PnP BIOS data at 0xc00f7040
pnpbios: Entry = f0000:b6ae  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP-1U   > on motherboard
acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    A   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x68  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 29 func 7
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 00000000, size  0, enabled
found->	vendor=0x8086, dev=0x3580, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3584, revid=0x02
	bus=0, slot=0, func=1
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3585, revid=0x02
	bus=0, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base e0000000, size 27, enabled
	map[14]: type 1, range 32, base d0000000, size 19, enabled
	map[18]: type 4, range 32, base 00001800, size  3, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type 3, range 32, base e8000000, size 27, enabled
	map[14]: type 1, range 32, base d0080000, size 19, enabled
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D3  current D0
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[10]: type 1, range 32, base d0100000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 00001810, size  4, enabled
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001880, size  5, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c3, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 000018c0, size  6, enabled
	map[18]: type 1, range 32, base d0100c00, size  9, enabled
	map[1c]: type 1, range 32, base d0100800, size  8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: IBM Corporation product 0x4484, class 9/0, rev 2.00/0.01, addr 2
uhub1: 3 ports with 3 removable, self powered
ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   5
pcib1:   I/O decode        0x3000-0x7fff
pcib1:   memory decode     0xd0200000-0xdfffffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
---- before setting priority for links ------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110  1310
	references:	1
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110  1310
	references:	1
	priority:	760
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKG irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
	map[10]: type 1, range 32, base b0000000, size 12, enabled
pcib1: matched entry for 2.0.INTA (source \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1180, dev=0x0476, revid=0x8d
	bus=2, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0210000, size  8, enabled
pcib1: matched entry for 2.0.INTB (source \\_SB_.LNKB)
pcib1: slot 0 INTB is routed to irq 11
found->	vendor=0x1180, dev=0x0822, revid=0x13
	bus=2, slot=0, func=1
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0220000, size 17, enabled
	map[18]: type 4, range 32, base 00007000, size  6, enabled
pcib1: matched entry for 2.1.INTA (source \\_SB_.LNKE)
pcib1: slot 1 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1077, revid=0x00
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 16, enabled
pcib1: matched entry for 2.2.INTA (source \\_SB_.LNKF)
pcib1: slot 2 INTA is routed to irq 11
found->	vendor=0x168c, dev=0x1014, revid=0x01
	bus=2, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
pcib1: device cbb0 requested unsupported memory range 0x0-0x0 (decoding 0xd0200000-0xdfffffff, 0xf0000000-0xf7ffffff)
pcib1: device cbb0 requested decoded memory range 0xd0200000-0xdfffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x00010000 0x00010004 0x00010008 0x0001000c 
  0x10: 0x00010010 0x00010014 0x00010018 0x0001001c 
  0x20: 0x00010020 0x00010024 0x00010028 0x0001002c 
  0x30: 0x00010030 0x00010034 0x00010038 0x0001003c 
  0x40: 0x00010040 0x00010044 0x00010048 0x0001004c 
  0x50: 0x00010050 0x00010054 0x00010058 0x0001005c 
  0x60: 0x00010060 0x00010064 0x00010068 0x0001006c 
  0x70: 0x00010070 0x00010074 0x00010078 0x0001007c 
  0x80: 0x00010080 0x00010084 0x00010088 0x0001008c 
  0x90: 0x00010090 0x00010094 0x00010098 0x0001009c 
  0xa0: 0x000100a0 0x000100a4 0x000100a8 0x000100ac 
  0xb0: 0x000100b0 0x000100b4 0x000100b8 0x000100bc 
  0xc0: 0x000100c0 0x000100c4 0x000100c8 0x000100cc 
  0xd0: 0x000100d0 0x000100d4 0x000100d8 0x000100dc 
  0xe0: 0x000100e0 0x000100e4 0x000100e8 0x000100ec 
  0xf0: 0x000100f0 0x000100f4 0x000100f8 0x000100fc 
pci2: <base peripheral> at device 0.1 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x7000-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2
pcib1: device em0 requested decoded memory range 0xd0220000-0xd023ffff
pcib1: device em0 requested decoded I/O range 0x7000-0x703f
em0: bpf attached
em0:  Speed:N/A  Duplex:N/A
pci2: <network, ethernet> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 8250 or not responding
ppc0: using extended I/O port range
ppc0: SPP
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
acpi_ec0: Changing GLK from 1 to 0
acpi_cmbat0: <Control Method Battery> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1196123274 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
em0: Link is up 100 Mbps Full Duplex
ata1: spurious interrupt - status=0x00 error=0x00
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 50 us
acpi_ec0: info: new max delay is 55 us
acpi_ec0: info: new max delay is 520 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cbb0: Unsupported card type detected
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc6998c60
ad0: <HITACHI_DK13FA-40B/00MCA0B3> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH4 chip
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:30708657
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:30708720 l:47431440
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 15722832384 end 15722864639
GEOM: Configure ad0s2, start 15722864640 length 24284897280 end 40007761919
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s2c, start 0 length 24284897280 end 24284897279
GEOM: Configure ad0s2d, start 536870912 length 402653184 end 939524095
GEOM: Configure ad0s2e, start 939524096 length 23345373184 end 24284897279
acd0: <HL-DT-STDVD-ROM GDR8083N/0K03> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: 120mm data disc
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
WARNING: driver "rtc" used unreserved major device number 202
WARNING: driver "vmmon" used unreserved major device number 200
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
vmnet1: bpf attached
em0: promiscuous mode enabled
vmnet1: promiscuous mode enabled

*) Boot -v without ultrabase X4
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE-p1 #2: Sat Mar 27 02:09:14 JST 2004
    nono@mars3.valicert.com:/usr/obj/usr/src/sys/MARS3
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a30000.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc0a302c8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a30370.
Calibrating clock(s) ... i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1196122237 Hz
CPU: Intel(R) Pentium(R) M processor 1200MHz (1196.12-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
  Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 1064173568 (1014 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000003e4e2fff, 1032572928 bytes (252093 pages)
avail memory = 1024253952 (976 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6fc0
bios32: Entry = 0xfd740 (c00fd740)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xfd6d0+0x1f8
pnpbios: Found PnP BIOS data at 0xc00f7040
pnpbios: Entry = f0000:b6ae  Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM    TP-1U   > on motherboard
acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
PCI-Only Interrupts: none
Location  Bus Device Pin  Link  IRQs
embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    A   0x69  3 4 5 6 7 9 10 11 12 14 15
slot 1      2    2    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    2    1    A   0x68  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 29 func 7
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base 00000000, size  0, enabled
found->	vendor=0x8086, dev=0x3580, revid=0x02
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3584, revid=0x02
	bus=0, slot=0, func=1
	class=08-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x3585, revid=0x02
	bus=0, slot=0, func=3
	class=08-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 3, range 32, base e0000000, size 27, enabled
	map[14]: type 1, range 32, base d0000000, size 19, enabled
	map[18]: type 4, range 32, base 00001800, size  3, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
pcib0: slot 2 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D1 D3  current D0
	map[10]: type 3, range 32, base e8000000, size 27, enabled
	map[14]: type 1, range 32, base d0080000, size 19, enabled
found->	vendor=0x8086, dev=0x3582, revid=0x02
	bus=0, slot=2, func=1
	class=03-80-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 1  supports D0 D1 D3  current D0
	map[20]: type 4, range 32, base 00001820, size  5, enabled
pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
pcib0: slot 29 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x24c2, revid=0x01
	bus=0, slot=29, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	map[20]: type 4, range 32, base 00001840, size  5, enabled
pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
pcib0: slot 29 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c4, revid=0x01
	bus=0, slot=29, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[20]: type 4, range 32, base 00001860, size  5, enabled
pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
pcib0: slot 29 INTC is routed to irq 11
found->	vendor=0x8086, dev=0x24c7, revid=0x01
	bus=0, slot=29, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=11
	map[10]: type 1, range 32, base d0100000, size 10, enabled
pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
pcib0: slot 29 INTD is routed to irq 11
found->	vendor=0x8086, dev=0x24cd, revid=0x01
	bus=0, slot=29, func=7
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x8086, dev=0x2448, revid=0x81
	bus=0, slot=30, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x24cc, revid=0x01
	bus=0, slot=31, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type 4, range 32, base 00000000, size  3, enabled
	map[14]: type 4, range 32, base 00000000, size  2, enabled
	map[18]: type 4, range 32, base 00000000, size  3, enabled
	map[1c]: type 4, range 32, base 00000000, size  2, enabled
	map[20]: type 4, range 32, base 00001810, size  4, enabled
found->	vendor=0x8086, dev=0x24ca, revid=0x01
	bus=0, slot=31, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	map[20]: type 4, range 32, base 00001880, size  5, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c3, revid=0x01
	bus=0, slot=31, func=3
	class=0c-05-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	map[10]: type 4, range 32, base 00001c00, size  8, enabled
	map[14]: type 4, range 32, base 000018c0, size  6, enabled
	map[18]: type 1, range 32, base d0100c00, size  9, enabled
	map[1c]: type 1, range 32, base d0100800, size  8, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c5, revid=0x01
	bus=0, slot=31, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 00002400, size  8, enabled
	map[14]: type 4, range 32, base 00002000, size  7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
pcib0: slot 31 INTB is routed to irq 11
found->	vendor=0x8086, dev=0x24c6, revid=0x01
	bus=0, slot=31, func=6
	class=07-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D3  current D0
pci0: <base peripheral> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 0.3 (no driver attached)
agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 11 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 11 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   5
pcib1:   I/O decode        0x3000-0x7fff
pcib1:   memory decode     0xd0200000-0xdfffffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
---- initial configuration ------------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
---- before setting priority for links ------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110  1310
	references:	1
	priority:	0
---- before fixup boot-disabled links -------------
\\_SB_.LNKG:
	interrupts:	     3     4     5     6     7     9    10    11
	penalty:	  1110  1110   110  1110  1110   110   110  1310
	references:	1
	priority:	760
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
\\_SB_.LNKG irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
	map[10]: type 1, range 32, base b0000000, size 12, enabled
pcib1: matched entry for 2.0.INTA (source \\_SB_.LNKA)
pcib1: slot 0 INTA is routed to irq 11
found->	vendor=0x1180, dev=0x0476, revid=0x8d
	bus=2, slot=0, func=0
	class=06-07-00, hdrtype=0x02, mfdev=1
	cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0210000, size  8, enabled
pcib1: matched entry for 2.0.INTB (source \\_SB_.LNKB)
pcib1: slot 0 INTB is routed to irq 11
found->	vendor=0x1180, dev=0x0822, revid=0x13
	bus=2, slot=0, func=1
	class=08-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base d0220000, size 17, enabled
	map[18]: type 4, range 32, base 00007000, size  6, enabled
pcib1: matched entry for 2.1.INTA (source \\_SB_.LNKE)
pcib1: slot 1 INTA is routed to irq 11
found->	vendor=0x8086, dev=0x1077, revid=0x00
	bus=2, slot=1, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base d0200000, size 16, enabled
pcib1: matched entry for 2.2.INTA (source \\_SB_.LNKF)
pcib1: slot 2 INTA is routed to irq 11
found->	vendor=0x168c, dev=0x1014, revid=0x01
	bus=2, slot=2, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 0.0 on pci2
pcib1: device cbb0 requested unsupported memory range 0x0-0x0 (decoding 0xd0200000-0xdfffffff, 0xf0000000-0xf7ffffff)
pcib1: device cbb0 requested decoded memory range 0xd0200000-0xdfffffff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
  0x00: 0x00010000 0x00010004 0x00010008 0x0001000c 
  0x10: 0x00010010 0x00010014 0x00010018 0x0001001c 
  0x20: 0x00010020 0x00010024 0x00010028 0x0001002c 
  0x30: 0x00010030 0x00010034 0x00010038 0x0001003c 
  0x40: 0x00010040 0x00010044 0x00010048 0x0001004c 
  0x50: 0x00010050 0x00010054 0x00010058 0x0001005c 
  0x60: 0x00010060 0x00010064 0x00010068 0x0001006c 
  0x70: 0x00010070 0x00010074 0x00010078 0x0001007c 
  0x80: 0x00010080 0x00010084 0x00010088 0x0001008c 
  0x90: 0x00010090 0x00010094 0x00010098 0x0001009c 
  0xa0: 0x000100a0 0x000100a4 0x000100a8 0x000100ac 
  0xb0: 0x000100b0 0x000100b4 0x000100b8 0x000100bc 
  0xc0: 0x000100c0 0x000100c4 0x000100c8 0x000100cc 
  0xd0: 0x000100d0 0x000100d4 0x000100d8 0x000100dc 
  0xe0: 0x000100e0 0x000100e4 0x000100e8 0x000100ec 
  0xf0: 0x000100f0 0x000100f4 0x000100f8 0x000100fc 
pci2: <base peripheral> at device 0.1 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x7000-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2
pcib1: device em0 requested decoded memory range 0xd0220000-0xd023ffff
pcib1: device em0 requested decoded I/O range 0x7000-0x703f
em0: bpf attached
em0:  Speed:N/A  Duplex:N/A
pci2: <network, ethernet> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port 0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pci0: <simple comms> at device 31.6 (no driver attached)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
acpi_ec0: Changing GLK from 1 to 0
acpi_cmbat0: <Control Method Battery> on acpi0
unknown: not probed (disabled)
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff,0xc0000-0xcc7ff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: using extended I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x1 0x1 0x1 0x1
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1196122237 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_ec0: info: new max delay is 85 us
acpi_cmbat0: battery initialization done, tried 1 times
acpi_cmbat1: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
cbb0: Unsupported card type detected
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH4 chip
ata0-master: setting UDMA100 on Intel ICH4 chip
GEOM: create disk ad0 dp=0xc6a0e260
ad0: <HITACHI_DK13FA-40B/00MCA0B3> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
ar: FreeBSD check1 failed
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:30708657
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:30708720 l:47431440
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 15722832384 end 15722864639
GEOM: Configure ad0s2, start 15722864640 length 24284897280 end 40007761919
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
GEOM: Configure ad0s2c, start 0 length 24284897280 end 24284897279
GEOM: Configure ad0s2d, start 536870912 length 402653184 end 939524095
GEOM: Configure ad0s2e, start 939524096 length 23345373184 end 24284897279
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
em0: Link is up 100 Mbps Full Duplex
em0: Link is up 100 Mbps Full Duplex
WARNING: driver "rtc" used unreserved major device number 202
WARNING: driver "vmmon" used unreserved major device number 200
vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 (3.2.x mvm) $
vmmon: Module vmmon: initialized
vmnet1: bpf attached
em0: promiscuous mode enabled
vmnet1: promiscuous mode enabled

*) sysctl hw.acpi

hw.acpi.supported_sleep_state: S3 S4 S5 
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S1
hw.acpi.lid_switch_state: S1
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 5
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_poweroff: 0
hw.acpi.reset_video: 1
hw.acpi.cpu.max_speed: 8
hw.acpi.cpu.current_speed: 8
hw.acpi.cpu.performance_speed: 8
hw.acpi.cpu.economy_speed: 4
hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85
hw.acpi.cpu.cx_lowest: 0
hw.acpi.cpu.cx_history: 11138/0 0/0 0/0
hw.acpi.thermal.min_runtime: 0
hw.acpi.thermal.polling_rate: 30
hw.acpi.thermal.tz0.temperature: 3342
hw.acpi.thermal.tz0.active: -1
hw.acpi.thermal.tz0.thermal_flags: 0
hw.acpi.thermal.tz0._PSV: 3637
hw.acpi.thermal.tz0._HOT: -1
hw.acpi.thermal.tz0._CRT: 3682
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
hw.acpi.battery.life: 98
hw.acpi.battery.time: -1
hw.acpi.battery.state: 0
hw.acpi.battery.units: 2
hw.acpi.battery.info_expire: 5
hw.acpi.acline: 1

*) acpidump
If you interested it, please let me know how can I send it.
Since handbook ask not send it to mailing list, I do not send it
this time.

Thanks,
Ko
