From owner-acpi-jp@jp.FreeBSD.org Sat Mar 27 22:29:24 2004
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id i2RDTOB22907;
	Sat, 27 Mar 2004 22:29:24 +0900 (JST)
	(envelope-from owner-acpi-jp@jp.FreeBSD.org)
Received: from mail.ettnet.se (big.ettnet.se [212.109.4.18])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id i2RDTLd22902
	for <acpi-jp@jp.FreeBSD.org>; Sat, 27 Mar 2004 22:29:22 +0900 (JST)
	(envelope-from freite@ettnet.se)
Received: from fuzz.se ([212.109.4.180] helo=fuzz.ettnet.se)
	by mail.ettnet.se with asmtp (Exim 4.30; FreeBSD)
	id 1B7DsE-000Mk7-Dr
	for acpi-jp@jp.FreeBSD.org; Sat, 27 Mar 2004 14:29:18 +0100
Message-Id: <6.0.1.1.2.20040327141700.02c0ab30@mail.ettnet.se>
X-Sender: freite@mail.ettnet.se
X-Mailer: QUALCOMM Windows Eudora Version 6.0.1.1
To: acpi-jp@jp.FreeBSD.org
From: Fredrik Reite <freite@ettnet.se>
In-Reply-To: <86n063ug3j.wl@nifty.com>
References: <86n063ug3j.wl@nifty.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Reply-To: acpi-jp@jp.FreeBSD.org
Precedence: list
Date: Sat, 27 Mar 2004 14:31:25 +0100
X-Sequence: acpi-jp 3153
Subject: [acpi-jp 3153] Re: ACPI on ThinkPad X40
Sender: owner-acpi-jp@jp.FreeBSD.org
X-Originator: freite@ettnet.se
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+040307


I have similar problems with my IBM X31. Part of the problem seems to be 
related to the ATA driver.
try atacontrol detach 1 and see if it helps. That allows me to S3 
suspend+resume ONE time. But it still hangs on shutdown.

At 04:24 2004-03-27, you wrote:
>Hello,
>
>I installed FreeBSD 5.2.1 to ThinkPad X40 and have some problem about
>ACPI.  If I use it with Ultrabase X4, it works fine, but without it,
>couple of issues come.
>
>I am also tring disable ACPI, enable APM, etc.  Most cases works
>only when ultrabase X4 is used.
>
>
>Here is my configuration.
>System Name : ThinkPad 40(2371-7VJ)
>OS : FreeBSD 5.2.1-Release-P3
>Kernel cnfiguration: Generic, but APIC disabled
>
>/etc/sysctl.conf
>hw.acpi.disable_on_poweroff=0
>kern.ipc.shm_allow_removed=1
>
>*) ACPI enabled / without ultrabase X4
>Shutdown -h/-r: NG, stops after
>Uptime: 1m18s
>Shutting down ACPI
>
>Shutdown -p: NG, stops after
>Uptime: 1m18s
>Powering system off using ACPI
>
>acpiconf -s 3: Hang up
>
>*) ACPI enabled / with ultrabase X4
>Shutdown -h/-r/-p: OK
>acpiconf -s 3: It suspends, but when restarting, usb's error message
>                 comes
>
>Below is some information which requested at
>(http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/acpi-debug.html)
>
>*) Boot -v with ultrabase X4
>
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>FreeBSD 5.2.1-RELEASE-p1 #2: Sat Mar 27 02:09:14 JST 2004
>     nono@mars3.valicert.com:/usr/obj/usr/src/sys/MARS3
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a30000.
>Preloaded elf module "/boot/kernel/aio.ko" at 0xc0a302c8.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a30370.
>Calibrating clock(s) ... i8254 clock: 1193169 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 1196123274 Hz
>CPU: Intel(R) Pentium(R) M processor 1200MHz (1196.12-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
> 
>Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>real memory  = 1064173568 (1014 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000000c26000 - 0x000000003e4e2fff, 1032572928 bytes (252093 pages)
>avail memory = 1024253952 (976 MB)
>bios32: Found BIOS32 Service Directory header at 0xc00f6fc0
>bios32: Entry = 0xfd740 (c00fd740)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xfd6d0+0x1f8
>pnpbios: Found PnP BIOS data at 0xc00f7040
>pnpbios: Entry = f0000:b6ae  Rev = 1.0
>pnpbios: Event flag at 4b4
>Other BIOS signatures found:
>wlan: <802.11 Link Layer>
>null: <null device, zero device>
>random: <entropy source>
>mem: <memory & I/O>
>Pentium Pro MTRR support enabled
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <IBM    TP-1U   > on motherboard
>acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
>pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000f904
>pci_open(1a):   mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=35808086)
>pcibios: BIOS version 2.10
>Using $PIR table, 14 entries at 0xc00fdeb0
>PCI-Only Interrupts: none
>Location  Bus Device Pin  Link  IRQs
>embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>slot 1      2    2    A   0x69  3 4 5 6 7 9 10 11 12 14 15
>slot 1      2    2    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    1    A   0x68  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>AcpiOsDerivePciId: bus 0 dev 31 func 0
>AcpiOsDerivePciId: bus 2 dev 0 func 0
>AcpiOsDerivePciId: bus 0 dev 29 func 7
>acpi0: Power Button (fixed)
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>AcpiOsDerivePciId: bus 0 dev 0 func 0
>AcpiOsDerivePciId: bus 0 dev 0 func 1
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>---- initial configuration ------------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
>\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
>\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
>---- before setting priority for links ------------
>---- before fixup boot-disabled links -------------
>---- after fixup boot-disabled links --------------
>---- arbitrated configuration ---------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
>\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
>\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
>pci0: <ACPI PCI bus> on pcib0
>pci0: physical bus=0
>         map[10]: type 3, range 32, base 00000000, size  0, enabled
>found-> vendor=0x8086, dev=0x3580, revid=0x02
>         bus=0, slot=0, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x3584, revid=0x02
>         bus=0, slot=0, func=1
>         class=08-80-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x3585, revid=0x02
>         bus=0, slot=0, func=3
>         class=08-80-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         map[10]: type 3, range 32, base e0000000, size 27, enabled
>         map[14]: type 1, range 32, base d0000000, size 19, enabled
>         map[18]: type 4, range 32, base 00001800, size  3, enabled
>pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
>pcib0: slot 2 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x3582, revid=0x02
>         bus=0, slot=2, func=0
>         class=03-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 1  supports D0 D1 D3  current D0
>         map[10]: type 3, range 32, base e8000000, size 27, enabled
>         map[14]: type 1, range 32, base d0080000, size 19, enabled
>found-> vendor=0x8086, dev=0x3582, revid=0x02
>         bus=0, slot=2, func=1
>         class=03-80-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         powerspec 1  supports D0 D1 D3  current D0
>         map[20]: type 4, range 32, base 00001820, size  5, enabled
>pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
>pcib0: slot 29 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x24c2, revid=0x01
>         bus=0, slot=29, func=0
>         class=0c-03-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         map[20]: type 4, range 32, base 00001840, size  5, enabled
>pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
>pcib0: slot 29 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c4, revid=0x01
>         bus=0, slot=29, func=1
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         map[20]: type 4, range 32, base 00001860, size  5, enabled
>pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
>pcib0: slot 29 INTC is routed to irq 11
>found-> vendor=0x8086, dev=0x24c7, revid=0x01
>         bus=0, slot=29, func=2
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=c, irq=11
>         map[10]: type 1, range 32, base d0100000, size 10, enabled
>pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
>pcib0: slot 29 INTD is routed to irq 11
>found-> vendor=0x8086, dev=0x24cd, revid=0x01
>         bus=0, slot=29, func=7
>         class=0c-03-20, hdrtype=0x00, mfdev=0
>         cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=d, irq=11
>         powerspec 2  supports D0 D3  current D0
>found-> vendor=0x8086, dev=0x2448, revid=0x81
>         bus=0, slot=30, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x24cc, revid=0x01
>         bus=0, slot=31, func=0
>         class=06-01-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         map[10]: type 4, range 32, base 00000000, size  3, enabled
>         map[14]: type 4, range 32, base 00000000, size  2, enabled
>         map[18]: type 4, range 32, base 00000000, size  3, enabled
>         map[1c]: type 4, range 32, base 00000000, size  2, enabled
>         map[20]: type 4, range 32, base 00001810, size  4, enabled
>found-> vendor=0x8086, dev=0x24ca, revid=0x01
>         bus=0, slot=31, func=1
>         class=01-01-8a, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
>         map[20]: type 4, range 32, base 00001880, size  5, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c3, revid=0x01
>         bus=0, slot=31, func=3
>         class=0c-05-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         map[10]: type 4, range 32, base 00001c00, size  8, enabled
>         map[14]: type 4, range 32, base 000018c0, size  6, enabled
>         map[18]: type 1, range 32, base d0100c00, size  9, enabled
>         map[1c]: type 1, range 32, base d0100800, size  8, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c5, revid=0x01
>         bus=0, slot=31, func=5
>         class=04-01-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D3  current D0
>         map[10]: type 4, range 32, base 00002400, size  8, enabled
>         map[14]: type 4, range 32, base 00002000, size  7, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c6, revid=0x01
>         bus=0, slot=31, func=6
>         class=07-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D3  current D0
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 
>mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0
>agp0: detected 8060k stolen memory
>agp0: aperture size is 128M
>pci0: <display> at device 2.1 (no driver attached)
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 
>11 at device 29.0 on pci0
>usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhub1: IBM Corporation product 0x4484, class 9/0, rev 2.00/0.01, addr 2
>uhub1: 3 ports with 3 removable, self powered
>ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1
>ums0: 3 buttons and Z dir.
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 
>11 at device 29.1 on pci0
>usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 
>11 at device 29.2 on pci0
>usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub3: 2 ports with 2 removable, self powered
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib1:   secondary bus     2
>pcib1:   subordinate bus   5
>pcib1:   I/O decode        0x3000-0x7fff
>pcib1:   memory decode     0xd0200000-0xdfffffff
>pcib1:   prefetched decode 0xf0000000-0xf7ffffff
>---- initial configuration ------------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
>\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
>\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
>\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
>---- before setting priority for links ------------
>\\_SB_.LNKG:
>         interrupts:          3     4     5     6     7     9    10    11
>         penalty:          1110  1110   110  1110  1110   110   110  1310
>         references:     1
>         priority:       0
>---- before fixup boot-disabled links -------------
>\\_SB_.LNKG:
>         interrupts:          3     4     5     6     7     9    10    11
>         penalty:          1110  1110   110  1110  1110   110   110  1310
>         references:     1
>         priority:       760
>---- after fixup boot-disabled links --------------
>---- arbitrated configuration ---------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
>\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
>\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
>\\_SB_.LNKG irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
>pci2: <ACPI PCI bus> on pcib1
>pci2: physical bus=2
>         map[10]: type 1, range 32, base b0000000, size 12, enabled
>pcib1: matched entry for 2.0.INTA (source \\_SB_.LNKA)
>pcib1: slot 0 INTA is routed to irq 11
>found-> vendor=0x1180, dev=0x0476, revid=0x8d
>         bus=2, slot=0, func=0
>         class=06-07-00, hdrtype=0x02, mfdev=1
>         cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 
> (1750 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         map[10]: type 1, range 32, base d0210000, size  8, enabled
>pcib1: matched entry for 2.0.INTB (source \\_SB_.LNKB)
>pcib1: slot 0 INTB is routed to irq 11
>found-> vendor=0x1180, dev=0x0822, revid=0x13
>         bus=2, slot=0, func=1
>         class=08-05-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         map[10]: type 1, range 32, base d0220000, size 17, enabled
>         map[18]: type 4, range 32, base 00007000, size  6, enabled
>pcib1: matched entry for 2.1.INTA (source \\_SB_.LNKE)
>pcib1: slot 1 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x1077, revid=0x00
>         bus=2, slot=1, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D3  current D0
>         map[10]: type 1, range 32, base d0200000, size 16, enabled
>pcib1: matched entry for 2.2.INTA (source \\_SB_.LNKF)
>pcib1: slot 2 INTA is routed to irq 11
>found-> vendor=0x168c, dev=0x1014, revid=0x01
>         bus=2, slot=2, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
>         lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D3  current D0
>cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at 
>device 0.0 on pci2
>pcib1: device cbb0 requested unsupported memory range 0x0-0x0 (decoding 
>0xd0200000-0xdfffffff, 0xf0000000-0xf7ffffff)
>pcib1: device cbb0 requested decoded memory range 0xd0200000-0xdfffffff
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [MPSAFE]
>cbb0: PCI Configuration space:
>   0x00: 0x00010000 0x00010004 0x00010008 0x0001000c
>   0x10: 0x00010010 0x00010014 0x00010018 0x0001001c
>   0x20: 0x00010020 0x00010024 0x00010028 0x0001002c
>   0x30: 0x00010030 0x00010034 0x00010038 0x0001003c
>   0x40: 0x00010040 0x00010044 0x00010048 0x0001004c
>   0x50: 0x00010050 0x00010054 0x00010058 0x0001005c
>   0x60: 0x00010060 0x00010064 0x00010068 0x0001006c
>   0x70: 0x00010070 0x00010074 0x00010078 0x0001007c
>   0x80: 0x00010080 0x00010084 0x00010088 0x0001008c
>   0x90: 0x00010090 0x00010094 0x00010098 0x0001009c
>   0xa0: 0x000100a0 0x000100a4 0x000100a8 0x000100ac
>   0xb0: 0x000100b0 0x000100b4 0x000100b8 0x000100bc
>   0xc0: 0x000100c0 0x000100c4 0x000100c8 0x000100cc
>   0xd0: 0x000100d0 0x000100d4 0x000100d8 0x000100dc
>   0xe0: 0x000100e0 0x000100e4 0x000100e8 0x000100ec
>   0xf0: 0x000100f0 0x000100f4 0x000100f8 0x000100fc
>pci2: <base peripheral> at device 0.1 (no driver attached)
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 
>0x7000-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2
>pcib1: device em0 requested decoded memory range 0xd0220000-0xd023ffff
>pcib1: device em0 requested decoded I/O range 0x7000-0x703f
>em0: bpf attached
>em0:  Speed:N/A  Duplex:N/A
>pci2: <network, ethernet> at device 2.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 
>0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: reset tp1 mask=03 ostat0=50 ostat1=00
>ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
>ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
>ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>pci0: <multimedia, audio> at device 31.5 (no driver attached)
>pci0: <simple comms> at device 31.6 (no driver attached)
>unknown: not probed (disabled)
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x54ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
>psm0: unable to allocate IRQ
>psmcpnp0 irq 12 on acpi0
>psm0: current command byte:0047
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
>psm0: config:00000000, flags:00000000, packet size:3
>psm0: syncmask:c0, syncbits:00
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0x1 0x1 0x1 0x1
>sio0: probe failed test(s): 0 1 2 4 6 7 9
>sio0 port 0x3f8-0x3ff irq 4 on acpi0
>sio0: type 8250 or not responding
>ppc0: using extended I/O port range
>ppc0: SPP
>ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
>ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>plip0: bpf attached
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>unknown: not probed (disabled)
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0x1 0x1 0x1 0x1
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>acpi_ec0: Changing GLK from 1 to 0
>acpi_cmbat0: <Control Method Battery> on acpi0
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>acpi_acad0: <AC Adapter> on acpi0
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0x1 0x1 0x1 0x1
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>atkbdc: atkbdc0 already exists; skipping it
>ppc: ppc0 already exists; skipping it
>sio: sio0 already exists; skipping it
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>ex_isa_identify()
>sc: sc0 already exists; skipping it
>vga: vga0 already exists; skipping it
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>orm0: <Option ROMs> at iomem 
>0xe0000-0xeffff,0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff,0xc0000-0xcc7ff 
>on isa0
>pmtimer0 on isa0
>adv0: not probed (disabled)
>aha0: not probed (disabled)
>aic0: not probed (disabled)
>bt0: not probed (disabled)
>cs0: not probed (disabled)
>ed0: not probed (disabled)
>fdc0: ready for input in output
>fdc0: cmd 3 failed at out byte 1 of 3
>fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
>fe0: not probed (disabled)
>ie0: not probed (disabled)
>le0: not probed (disabled)
>lnc0: not probed (disabled)
>pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
>pcic1: not probed (disabled)
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0x1 0x1 0x1 0x1
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>sn0: not probed (disabled)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>vt0: not probed (disabled)
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>Timecounter "TSC" frequency 1196123274 Hz quality 800
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>em0: Link is up 100 Mbps Full Duplex
>ata1: spurious interrupt - status=0x00 error=0x00
>acpi_cpu0: set speed to 100.0%
>acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>acpi_cmbat0: battery initialization start
>acpi_ec0: info: new max delay is 50 us
>acpi_ec0: info: new max delay is 55 us
>acpi_ec0: info: new max delay is 520 us
>acpi_cmbat0: battery initialization done, tried 1 times
>acpi_acad0: acline initialization start
>acpi_acad0: On Line
>acpi_acad0: acline initialization done, tried 1 times
>cbb0: Unsupported card type detected
>ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
>ata0-master: setting PIO4 on Intel ICH4 chip
>ata0-master: setting UDMA100 on Intel ICH4 chip
>GEOM: create disk ad0 dp=0xc6998c60
>ad0: <HITACHI_DK13FA-40B/00MCA0B3> ATA-5 disk at ata0-master
>ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
>ad0: 16 secs/int, 1 depth queue, UDMA100
>GEOM: new disk ad0
>ar: FreeBSD check1 failed
>ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
>ata1-master: setting PIO4 on Intel ICH4 chip
>[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:30708657
>[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:30708720 l:47431440
>[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>GEOM: Configure ad0s1, start 32256 length 15722832384 end 15722864639
>GEOM: Configure ad0s2, start 15722864640 length 24284897280 end 40007761919
>GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
>GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
>GEOM: Configure ad0s2c, start 0 length 24284897280 end 24284897279
>GEOM: Configure ad0s2d, start 536870912 length 402653184 end 939524095
>GEOM: Configure ad0s2e, start 939524096 length 23345373184 end 24284897279
>acd0: <HL-DT-STDVD-ROM GDR8083N/0K03> DVDROM drive at ata1 as master
>acd0: read 1722KB/s (4134KB/s), 256KB buffer, PIO4
>acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
>acd0: Writes:
>acd0: Audio: play, 256 volume levels
>acd0: Mechanism: ejectable tray, unlocked
>acd0: Medium: 120mm data disc
>Mounting root from ufs:/dev/ad0s2a
>start_init: trying /sbin/init
>Linux ELF exec handler installed
>linprocfs registered
>em0: Link is up 100 Mbps Full Duplex
>em0: Link is up 100 Mbps Full Duplex
>WARNING: driver "rtc" used unreserved major device number 202
>WARNING: driver "vmmon" used unreserved major device number 200
>vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: 
>build-570 (3.2.x mvm) $
>vmmon: Module vmmon: initialized
>vmnet1: bpf attached
>em0: promiscuous mode enabled
>vmnet1: promiscuous mode enabled
>
>*) Boot -v without ultrabase X4
>Copyright (c) 1992-2004 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>FreeBSD 5.2.1-RELEASE-p1 #2: Sat Mar 27 02:09:14 JST 2004
>     nono@mars3.valicert.com:/usr/obj/usr/src/sys/MARS3
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a30000.
>Preloaded elf module "/boot/kernel/aio.ko" at 0xc0a302c8.
>Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a30370.
>Calibrating clock(s) ... i8254 clock: 1193169 Hz
>CLK_USE_I8254_CALIBRATION not specified - using default frequency
>Timecounter "i8254" frequency 1193182 Hz quality 0
>Calibrating TSC clock ... TSC clock: 1196122237 Hz
>CPU: Intel(R) Pentium(R) M processor 1200MHz (1196.12-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
> 
>Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
>real memory  = 1064173568 (1014 MB)
>Physical memory chunk(s):
>0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
>0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
>0x0000000000c26000 - 0x000000003e4e2fff, 1032572928 bytes (252093 pages)
>avail memory = 1024253952 (976 MB)
>bios32: Found BIOS32 Service Directory header at 0xc00f6fc0
>bios32: Entry = 0xfd740 (c00fd740)  Rev = 0  Len = 1
>pcibios: PCI BIOS entry at 0xfd6d0+0x1f8
>pnpbios: Found PnP BIOS data at 0xc00f7040
>pnpbios: Entry = f0000:b6ae  Rev = 1.0
>pnpbios: Event flag at 4b4
>Other BIOS signatures found:
>wlan: <802.11 Link Layer>
>null: <null device, zero device>
>random: <entropy source>
>mem: <memory & I/O>
>Pentium Pro MTRR support enabled
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>acpi0: <IBM    TP-1U   > on motherboard
>acpi_ec0: <Embedded Controller: ECDT, GPE 0x1c, GLK> port 0x66,0x62 on acpi0
>pci_open(1):    mode 1 addr port (0x0cf8) is 0x8000f904
>pci_open(1a):   mode1res=0x80000000 (0x80000000)
>pci_cfgcheck:   device 0 [class=060000] [hdr=80] is there (id=35808086)
>pcibios: BIOS version 2.10
>Using $PIR table, 14 entries at 0xc00fdeb0
>PCI-Only Interrupts: none
>Location  Bus Device Pin  Link  IRQs
>embedded    0    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    2    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    2    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    1    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0    1    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    1    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    1    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   30    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>slot 1      2    2    A   0x69  3 4 5 6 7 9 10 11 12 14 15
>slot 1      2    2    B   0x6a  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    3    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>slot 2      9    0    D   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    1    A   0x61  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    2    A   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    9    2    B   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    2    1    A   0x68  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    A   0x60  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    B   0x63  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    C   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   29    D   0x6b  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   31    A   0x62  3 4 5 6 7 9 10 11 12 14 15
>embedded    0   31    B   0x61  3 4 5 6 7 9 10 11 12 14 15
>AcpiOsDerivePciId: bus 0 dev 31 func 0
>AcpiOsDerivePciId: bus 2 dev 0 func 0
>AcpiOsDerivePciId: bus 0 dev 29 func 7
>acpi0: Power Button (fixed)
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>ACPI timer looks GOOD min = 2, max = 3, width = 1
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>AcpiOsDerivePciId: bus 0 dev 0 func 0
>AcpiOsDerivePciId: bus 0 dev 0 func 1
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
>acpi_cpu0: <CPU> on acpi0
>acpi_tz0: <Thermal Zone> on acpi0
>acpi_lid0: <Control Method Lid Switch> on acpi0
>acpi_button0: <Sleep Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>---- initial configuration ------------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
>\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
>\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
>---- before setting priority for links ------------
>---- before fixup boot-disabled links -------------
>---- after fixup boot-disabled links --------------
>---- arbitrated configuration ---------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.2.0
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.0
>\\_SB_.LNKD irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.2
>\\_SB_.LNKH irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.29.3
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 0.31.1
>pci0: <ACPI PCI bus> on pcib0
>pci0: physical bus=0
>         map[10]: type 3, range 32, base 00000000, size  0, enabled
>found-> vendor=0x8086, dev=0x3580, revid=0x02
>         bus=0, slot=0, func=0
>         class=06-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x3584, revid=0x02
>         bus=0, slot=0, func=1
>         class=08-80-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x3585, revid=0x02
>         bus=0, slot=0, func=3
>         class=08-80-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         map[10]: type 3, range 32, base e0000000, size 27, enabled
>         map[14]: type 1, range 32, base d0000000, size 19, enabled
>         map[18]: type 4, range 32, base 00001800, size  3, enabled
>pcib0: matched entry for 0.2.INTA (source \\_SB_.LNKA)
>pcib0: slot 2 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x3582, revid=0x02
>         bus=0, slot=2, func=0
>         class=03-00-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 1  supports D0 D1 D3  current D0
>         map[10]: type 3, range 32, base e8000000, size 27, enabled
>         map[14]: type 1, range 32, base d0080000, size 19, enabled
>found-> vendor=0x8086, dev=0x3582, revid=0x02
>         bus=0, slot=2, func=1
>         class=03-80-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0003, statreg=0x0090, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         powerspec 1  supports D0 D1 D3  current D0
>         map[20]: type 4, range 32, base 00001820, size  5, enabled
>pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA)
>pcib0: slot 29 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x24c2, revid=0x01
>         bus=0, slot=29, func=0
>         class=0c-03-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         map[20]: type 4, range 32, base 00001840, size  5, enabled
>pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD)
>pcib0: slot 29 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c4, revid=0x01
>         bus=0, slot=29, func=1
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         map[20]: type 4, range 32, base 00001860, size  5, enabled
>pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC)
>pcib0: slot 29 INTC is routed to irq 11
>found-> vendor=0x8086, dev=0x24c7, revid=0x01
>         bus=0, slot=29, func=2
>         class=0c-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=c, irq=11
>         map[10]: type 1, range 32, base d0100000, size 10, enabled
>pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH)
>pcib0: slot 29 INTD is routed to irq 11
>found-> vendor=0x8086, dev=0x24cd, revid=0x01
>         bus=0, slot=29, func=7
>         class=0c-03-20, hdrtype=0x00, mfdev=0
>         cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=d, irq=11
>         powerspec 2  supports D0 D3  current D0
>found-> vendor=0x8086, dev=0x2448, revid=0x81
>         bus=0, slot=30, func=0
>         class=06-04-00, hdrtype=0x01, mfdev=0
>         cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
>found-> vendor=0x8086, dev=0x24cc, revid=0x01
>         bus=0, slot=31, func=0
>         class=06-01-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         map[10]: type 4, range 32, base 00000000, size  3, enabled
>         map[14]: type 4, range 32, base 00000000, size  2, enabled
>         map[18]: type 4, range 32, base 00000000, size  3, enabled
>         map[1c]: type 4, range 32, base 00000000, size  2, enabled
>         map[20]: type 4, range 32, base 00001810, size  4, enabled
>found-> vendor=0x8086, dev=0x24ca, revid=0x01
>         bus=0, slot=31, func=1
>         class=01-01-8a, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=255
>         map[20]: type 4, range 32, base 00001880, size  5, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c3, revid=0x01
>         bus=0, slot=31, func=3
>         class=0c-05-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         map[10]: type 4, range 32, base 00001c00, size  8, enabled
>         map[14]: type 4, range 32, base 000018c0, size  6, enabled
>         map[18]: type 1, range 32, base d0100c00, size  9, enabled
>         map[1c]: type 1, range 32, base d0100800, size  8, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c5, revid=0x01
>         bus=0, slot=31, func=5
>         class=04-01-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D3  current D0
>         map[10]: type 4, range 32, base 00002400, size  8, enabled
>         map[14]: type 4, range 32, base 00002000, size  7, enabled
>pcib0: matched entry for 0.31.INTB (source \\_SB_.LNKB)
>pcib0: slot 31 INTB is routed to irq 11
>found-> vendor=0x8086, dev=0x24c6, revid=0x01
>         bus=0, slot=31, func=6
>         class=07-03-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
>         lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D3  current D0
>pci0: <base peripheral> at device 0.1 (no driver attached)
>pci0: <base peripheral> at device 0.3 (no driver attached)
>agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0x1800-0x1807 
>mem 0xd0000000-0xd007ffff,0xe0000000-0xe7ffffff irq 11 at device 2.0 on pci0
>agp0: detected 8060k stolen memory
>agp0: aperture size is 128M
>pci0: <display> at device 2.1 (no driver attached)
>uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f irq 
>11 at device 29.0 on pci0
>usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f irq 
>11 at device 29.1 on pci0
>usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f irq 
>11 at device 29.2 on pci0
>usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>pcib1:   secondary bus     2
>pcib1:   subordinate bus   5
>pcib1:   I/O decode        0x3000-0x7fff
>pcib1:   memory decode     0xd0200000-0xdfffffff
>pcib1:   prefetched decode 0xf0000000-0xf7ffffff
>---- initial configuration ------------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
>\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
>\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
>\\_SB_.LNKG irq   0: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
>---- before setting priority for links ------------
>\\_SB_.LNKG:
>         interrupts:          3     4     5     6     7     9    10    11
>         penalty:          1110  1110   110  1110  1110   110   110  1310
>         references:     1
>         priority:       0
>---- before fixup boot-disabled links -------------
>\\_SB_.LNKG:
>         interrupts:          3     4     5     6     7     9    10    11
>         penalty:          1110  1110   110  1110  1110   110   110  1310
>         references:     1
>         priority:       760
>---- after fixup boot-disabled links --------------
>---- arbitrated configuration ---------------------
>\\_SB_.LNKA irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.0
>\\_SB_.LNKB irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.1
>\\_SB_.LNKC irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.0.2
>\\_SB_.LNKE irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.1.0
>\\_SB_.LNKF irq  11: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.0
>\\_SB_.LNKG irq  10: [  3  4  5  6  7  9 10 11] low,level,sharable 2.2.1
>pci2: <ACPI PCI bus> on pcib1
>pci2: physical bus=2
>         map[10]: type 1, range 32, base b0000000, size 12, enabled
>pcib1: matched entry for 2.0.INTA (source \\_SB_.LNKA)
>pcib1: slot 0 INTA is routed to irq 11
>found-> vendor=0x1180, dev=0x0476, revid=0x8d
>         bus=2, slot=0, func=0
>         class=06-07-00, hdrtype=0x02, mfdev=1
>         cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 
> (1750 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         map[10]: type 1, range 32, base d0210000, size  8, enabled
>pcib1: matched entry for 2.0.INTB (source \\_SB_.LNKB)
>pcib1: slot 0 INTB is routed to irq 11
>found-> vendor=0x1180, dev=0x0822, revid=0x13
>         bus=2, slot=0, func=1
>         class=08-05-00, hdrtype=0x00, mfdev=1
>         cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
>         intpin=b, irq=11
>         powerspec 2  supports D0 D1 D2 D3  current D0
>         map[10]: type 1, range 32, base d0220000, size 17, enabled
>         map[18]: type 4, range 32, base 00007000, size  6, enabled
>pcib1: matched entry for 2.1.INTA (source \\_SB_.LNKE)
>pcib1: slot 1 INTA is routed to irq 11
>found-> vendor=0x8086, dev=0x1077, revid=0x00
>         bus=2, slot=1, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
>         lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D3  current D0
>         map[10]: type 1, range 32, base d0200000, size 16, enabled
>pcib1: matched entry for 2.2.INTA (source \\_SB_.LNKF)
>pcib1: slot 2 INTA is routed to irq 11
>found-> vendor=0x168c, dev=0x1014, revid=0x01
>         bus=2, slot=2, func=0
>         class=02-00-00, hdrtype=0x00, mfdev=0
>         cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords)
>         lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
>         intpin=a, irq=11
>         powerspec 2  supports D0 D3  current D0
>cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at 
>device 0.0 on pci2
>pcib1: device cbb0 requested unsupported memory range 0x0-0x0 (decoding 
>0xd0200000-0xdfffffff, 0xf0000000-0xf7ffffff)
>pcib1: device cbb0 requested decoded memory range 0xd0200000-0xdfffffff
>cardbus0: <CardBus bus> on cbb0
>pccard0: <16-bit PCCard bus> on cbb0
>cbb0: [MPSAFE]
>cbb0: PCI Configuration space:
>   0x00: 0x00010000 0x00010004 0x00010008 0x0001000c
>   0x10: 0x00010010 0x00010014 0x00010018 0x0001001c
>   0x20: 0x00010020 0x00010024 0x00010028 0x0001002c
>   0x30: 0x00010030 0x00010034 0x00010038 0x0001003c
>   0x40: 0x00010040 0x00010044 0x00010048 0x0001004c
>   0x50: 0x00010050 0x00010054 0x00010058 0x0001005c
>   0x60: 0x00010060 0x00010064 0x00010068 0x0001006c
>   0x70: 0x00010070 0x00010074 0x00010078 0x0001007c
>   0x80: 0x00010080 0x00010084 0x00010088 0x0001008c
>   0x90: 0x00010090 0x00010094 0x00010098 0x0001009c
>   0xa0: 0x000100a0 0x000100a4 0x000100a8 0x000100ac
>   0xb0: 0x000100b0 0x000100b4 0x000100b8 0x000100bc
>   0xc0: 0x000100c0 0x000100c4 0x000100c8 0x000100cc
>   0xd0: 0x000100d0 0x000100d4 0x000100d8 0x000100dc
>   0xe0: 0x000100e0 0x000100e4 0x000100e8 0x000100ec
>   0xf0: 0x000100f0 0x000100f4 0x000100f8 0x000100fc
>pci2: <base peripheral> at device 0.1 (no driver attached)
>em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 
>0x7000-0x703f mem 0xd0220000-0xd023ffff irq 11 at device 1.0 on pci2
>pcib1: device em0 requested decoded memory range 0xd0220000-0xd023ffff
>pcib1: device em0 requested decoded I/O range 0x7000-0x703f
>em0: bpf attached
>em0:  Speed:N/A  Duplex:N/A
>pci2: <network, ethernet> at device 2.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH4 UDMA100 controller> port 
>0x1810-0x181f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
>ata0: reset tp1 mask=03 ostat0=50 ostat1=00
>ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
>ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
>ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
>ata0: at 0x1f0 irq 14 on atapci0
>ata0: [MPSAFE]
>ata1: reset tp1 mask=03 ostat0=00 ostat1=00
>ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00
>ata1-slave:  stat=0x00 err=0x00 lsb=0x00 msb=0x00
>ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
>ata1: at 0x170 irq 15 on atapci0
>ata1: [MPSAFE]
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>pci0: <multimedia, audio> at device 31.5 (no driver attached)
>pci0: <simple comms> at device 31.6 (no driver attached)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>atkbd: the current kbd controller command byte 0047
>atkbd: keyboard ID 0x54ab (2)
>kbd0 at atkbd0
>kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
>psm0: unable to allocate IRQ
>psmcpnp0 irq 12 on acpi0
>psm0: current command byte:0047
>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
>psm0: config:00000000, flags:00000000, packet size:3
>psm0: syncmask:c0, syncbits:00
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>sio0: configured irq 3 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0x1 0x1 0x1 0x1
>sio0: probe failed test(s): 0 1 2 4 6 7 9
>acpi_ec0: Changing GLK from 1 to 0
>acpi_cmbat0: <Control Method Battery> on acpi0
>unknown: not probed (disabled)
>acpi_cmbat1: <Control Method Battery> on acpi0
>acpi_acad0: <AC Adapter> on acpi0
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>sio0: configured irq 3 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0x1 0x1 0x1 0x1
>sio0: probe failed test(s): 0 1 2 4 6 7 9
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>unknown: not probed (disabled)
>ata: ata0 already exists; skipping it
>ata: ata1 already exists; skipping it
>atkbdc: atkbdc0 already exists; skipping it
>Trying Read_Port at 203
>Trying Read_Port at 243
>Trying Read_Port at 283
>Trying Read_Port at 2c3
>Trying Read_Port at 303
>Trying Read_Port at 343
>Trying Read_Port at 383
>Trying Read_Port at 3c3
>ex_isa_identify()
>sc: sc0 already exists; skipping it
>vga: vga0 already exists; skipping it
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>unknown: status reg test failed ff
>isa_probe_children: disabling PnP devices
>isa_probe_children: probing non-PnP devices
>orm0: <Option ROMs> at iomem 
>0xe0000-0xeffff,0xdc000-0xdffff,0xcd800-0xce7ff,0xcc800-0xcd7ff,0xc0000-0xcc7ff 
>on isa0
>pmtimer0 on isa0
>adv0: not probed (disabled)
>aha0: not probed (disabled)
>aic0: not probed (disabled)
>bt0: not probed (disabled)
>cs0: not probed (disabled)
>ed0: not probed (disabled)
>fdc0: ready for input in output
>fdc0: cmd 3 failed at out byte 1 of 3
>fdc0 failed to probe at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
>fe0: not probed (disabled)
>ie0: not probed (disabled)
>le0: not probed (disabled)
>lnc0: not probed (disabled)
>pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
>pcic1: not probed (disabled)
>ppc0: parallel port found at 0x3bc
>ppc0: using extended I/O port range
>ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0: irq maps: 0x1 0x1 0x1 0x1
>sio0: probe failed test(s): 0 1 2 4 6 7 9
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 8250 or not responding
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>sio1: irq maps: 0x1 0x1 0x1 0x1
>sio1: probe failed test(s): 0 1 2 4 6 7 9
>sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
>sio2: not probed (disabled)
>sio3: not probed (disabled)
>sn0: not probed (disabled)
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>fb0: vga0, vga, type:VGA (5), flags:0x7007f
>fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
>fb0: init mode:24, bios mode:3, current mode:24
>fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
>VGA parameters upon power-up
>50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>VGA parameters in BIOS for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>EGA/VGA parameters to be used for mode 24
>50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
>bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
>b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
>3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
>vt0: not probed (disabled)
>isa_probe_children: probing PnP devices
>Device configuration finished.
>procfs registered
>Timecounter "TSC" frequency 1196122237 Hz quality 800
>Timecounters tick every 1.000 msec
>lo0: bpf attached
>acpi_cpu0: set speed to 100.0%
>acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
>acpi_cmbat0: battery initialization start
>acpi_ec0: info: new max delay is 85 us
>acpi_cmbat0: battery initialization done, tried 1 times
>acpi_cmbat1: battery initialization start
>acpi_acad0: acline initialization start
>acpi_acad0: On Line
>acpi_acad0: acline initialization done, tried 1 times
>cbb0: Unsupported card type detected
>ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
>ata0-master: setting PIO4 on Intel ICH4 chip
>ata0-master: setting UDMA100 on Intel ICH4 chip
>GEOM: create disk ad0 dp=0xc6a0e260
>ad0: <HITACHI_DK13FA-40B/00MCA0B3> ATA-5 disk at ata0-master
>ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
>ad0: 16 secs/int, 1 depth queue, UDMA100
>GEOM: new disk ad0
>ar: FreeBSD check1 failed
>[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:30708657
>[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:30708720 l:47431440
>[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
>GEOM: Configure ad0s1, start 32256 length 15722832384 end 15722864639
>GEOM: Configure ad0s2, start 15722864640 length 24284897280 end 40007761919
>GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
>GEOM: Configure ad0s2b, start 268435456 length 268435456 end 536870911
>GEOM: Configure ad0s2c, start 0 length 24284897280 end 24284897279
>GEOM: Configure ad0s2d, start 536870912 length 402653184 end 939524095
>GEOM: Configure ad0s2e, start 939524096 length 23345373184 end 24284897279
>Mounting root from ufs:/dev/ad0s2a
>start_init: trying /sbin/init
>Linux ELF exec handler installed
>linprocfs registered
>em0: Link is up 100 Mbps Full Duplex
>em0: Link is up 100 Mbps Full Duplex
>WARNING: driver "rtc" used unreserved major device number 202
>WARNING: driver "vmmon" used unreserved major device number 200
>vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: 
>build-570 (3.2.x mvm) $
>vmmon: Module vmmon: initialized
>vmnet1: bpf attached
>em0: promiscuous mode enabled
>vmnet1: promiscuous mode enabled
>
>*) sysctl hw.acpi
>
>hw.acpi.supported_sleep_state: S3 S4 S5
>hw.acpi.power_button_state: S5
>hw.acpi.sleep_button_state: S1
>hw.acpi.lid_switch_state: S1
>hw.acpi.standby_state: S1
>hw.acpi.suspend_state: S3
>hw.acpi.sleep_delay: 5
>hw.acpi.s4bios: 0
>hw.acpi.verbose: 1
>hw.acpi.disable_on_poweroff: 0
>hw.acpi.reset_video: 1
>hw.acpi.cpu.max_speed: 8
>hw.acpi.cpu.current_speed: 8
>hw.acpi.cpu.performance_speed: 8
>hw.acpi.cpu.economy_speed: 4
>hw.acpi.cpu.cx_supported: C1/1 C2/1 C3/85
>hw.acpi.cpu.cx_lowest: 0
>hw.acpi.cpu.cx_history: 11138/0 0/0 0/0
>hw.acpi.thermal.min_runtime: 0
>hw.acpi.thermal.polling_rate: 30
>hw.acpi.thermal.tz0.temperature: 3342
>hw.acpi.thermal.tz0.active: -1
>hw.acpi.thermal.tz0.thermal_flags: 0
>hw.acpi.thermal.tz0._PSV: 3637
>hw.acpi.thermal.tz0._HOT: -1
>hw.acpi.thermal.tz0._CRT: 3682
>hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
>hw.acpi.battery.life: 98
>hw.acpi.battery.time: -1
>hw.acpi.battery.state: 0
>hw.acpi.battery.units: 2
>hw.acpi.battery.info_expire: 5
>hw.acpi.acline: 1
>
>*) acpidump
>If you interested it, please let me know how can I send it.
>Since handbook ask not send it to mailing list, I do not send it
>this time.
>
>Thanks,
>Ko

