From owner-doc-jp@jp.freebsd.org  Sun Mar 18 21:15:09 2001
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id VAA79241;
	Sun, 18 Mar 2001 21:15:09 +0900 (JST)
	(envelope-from owner-doc-jp@jp.FreeBSD.org)
Received: from research.gate.nec.co.jp (research.gate.nec.co.jp [202.247.6.217])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id VAA79236
	for <doc-jp@jp.freebsd.org>; Sun, 18 Mar 2001 21:15:08 +0900 (JST)
	(envelope-from hino@nwk.cl.nec.co.jp)
Received: from leek.nwk.cl.nec.co.jp (IDENT:bEM7BfLbTIsWrogUvOLnsZswnFhhmRoY@leek.nwk.cl.nec.co.jp [10.56.32.7]) by research.gate.nec.co.jp (8.9.3+3.2W/000323) with ESMTP id VAA25661 for <doc-jp@jp.freebsd.org>; Sun, 18 Mar 2001 21:15:07 +0900 (JST)
Received: from localhost by leek.nwk.cl.nec.co.jp (8.11.2/NWK_M-20010214) with ESMTP
	id f2ICF6i43737 for <doc-jp@jp.freebsd.org>; Sun, 18 Mar 2001 21:15:07 +0900 (JST)
To: doc-jp@jp.freebsd.org
From: hino@ccm.cl.nec.co.jp
X-Mailer: Mew version 1.93 on Emacs 19.34 / Mule 2.3 (SUETSUMUHANA)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit
Message-Id: <20010318211506L.hino@nwk.cl.nec.co.jp>
Date: Sun, 18 Mar 2001 21:15:06 +0900
X-Dispatcher: imput version 980905(IM100)
Lines: 1799
Reply-To: doc-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+000315
X-Sequence: doc-jp 8069
Subject: [doc-jp 8069] 4.3-RELEASE's RELNOTES.TXT
Errors-To: owner-doc-jp@jp.freebsd.org
Sender: owner-doc-jp@jp.freebsd.org
X-Originator: hino@nwk.cl.nec.co.jp

$B8=;~E@$N(B-STABLE$B$N(Bsrc/release/texts/i386/RELNOTES.TXT$B$NF|K\8lLu$G$9!%(B
$B!t(B $B$3$l$,(B i386$B$N(B4.3-RELEASE/RELNOTES.TXT$B$K$J$k$s$G$9$h$M(B?

$B%A%'%C%/$*4j$$$7$^$9!%(B

$B86J8!$F|K\8lLu$rJB$Y$F$^$9$,!$%O!<%I%&%'%"%j%9%H$N$"$?$j$O$$$$2C8:$KJB(B
$B$Y$F$k$H$3$m$b$"$j$^$9(B X-P

$BF|Ln(B

----------------------------------------------------------------


                                 RELEASE NOTES
                           FreeBSD 4.2-STABLE snapshot
                               (i386 Architecture)

                                 $B%j%j!<%9%N!<%H(B
                           FreeBSD 4.2-STABLE snapshot
                               (i386$B%"!<%-%F%/%A%c(B)

Any installation failures or crashes should be reported by using the
send-pr command (those preferring a Web-based interface can also see
http://www.freebsd.org/send-pr.html).

$B%$%s%9%H!<%k$N<:GT$d%/%i%C%7%e$O(B, $BA4$F(B send-pr $B%3%^%s%I$GJs9p$7$F$/$@(B
$B$5$$(B (Web $B%Y!<%9$N%$%s%?%U%'!<%9$,$*9%$_$J$i(B
http://www.freebsd.org/send-pr.html $B$r$I$&$>(B).

For information about FreeBSD and the layout of the 4.2-STABLE directory
(especially if you're installing from floppies!), see ABOUT.TXT.  For
installation instructions, see the INSTALL.TXT and HARDWARE.TXT files.

FreeBSD $B$K4X$9$k>pJs(B, 4.2-STABLE $B$N%G%#%l%/%H%j9=@.$K4X$9$k>pJs$O(B($B%U%m%C(B
$B%T$+$i%$%s%9%H!<%k$7$F$$$k$N$J$iFC$K(B!), ABOUT.TXT $B$r;2>H$7$F$/$@$5$$(B. 
$B%$%s%9%H!<%k$K4X$9$k@bL@$O(B, INSTALL.TXT $B$H(B HARDWARE.TXT $B$r;2>H$7$F$/$@(B
$B$5$$(B.

For the latest of these 4-stable snapshots, you should always see:

4-stable $B$N%9%J%C%W%7%g%C%H$N:G?7HG$O(B, $B$$$D$G$b$3$N>l=j$rC5$7$F$/$@$5(B
$B$$(B:
        ftp://releng4.freebsd.org/pub/FreeBSD

Table of contents:
$BL\<!(B
------------------
1. What's new since 4.2-RELEASE
   4.2-RELEASE $B$+$i$NJQ99E@(B
   1.1 KERNEL CHANGES
       $B%+!<%M%k$NJQ99(B
   1.2 SECURITY FIXES
       $B%;%-%e%j%F%#>e$N=$@5(B
   1.3 USERLAND CHANGES
       $B%f!<%6%i%s%I$G$NJQ99(B

2. Supported Configurations
   $B%5%]!<%H$7$F$$$k9=@.(B
   2.1 Disk Controllers
       $B%G%#%9%/%3%s%H%m!<%i(B
   2.2 Ethernet cards
       $B%$!<%5%M%C%H%+!<%I(B
   2.3 FDDI
       FDDI
   2.4 ATM
       ATM
   2.5 Misc
       $B$=$NB>$N%G%P%$%9(B

3. Obtaining FreeBSD
   FreeBSD $B$NF~<j(B
   3.1 FTP/Mail
   3.2 CDROM

4. Upgrading from previous releases of FreeBSD
   FreeBSD $B$N0JA0$N%j%j!<%9$+$i%"%C%W%0%l!<%I$9$k$K$O(B

5. Reporting problems, making suggestions, submitting code
   $B>c32Js9p(B, $BDs0F$N;EJ}(B, $B%3!<%I$NDs6!$K$D$$$F(B

6. Acknowledgments
   $B<U<-(B

1. What's new since 4.2-RELEASE
   4.2-RELEASE$B$+$i$NJQ99E@(B
-------------------------------

1.1. KERNEL CHANGES
     $B%+!<%M%k$NJQ99(B
-------------------

Write combining for crashdumps has been implemented.  This feature
is useful when write caching is disabled on both SCSI and IDE disks,
where large memory dumps could take up to an hour to complete.

$B%/%i%C%7%e%@%s%W;~$N%i%$%H%3%s%P%$%K%s%0$r<BAu$7$^$7$?(B. SCSI $B$d(B IDE $B$N(B
$B%G%#%9%/$N=q$-9~$_%-%c%C%7%e$,L58z$K$J$C$F$$$F(B, $BBgNL$N%a%b%j%@%s%W$K(B1
$B;~4V$b$+$+$C$F$7$^$&$h$&$J;~$KLr$K$?$D$G$7$g$&(B.

The pccard driver and pccardc(8) now support multiple "beep types"
upon card insertion and removal.

$B%+!<%I$NA^H4;~$KLD$i$92;$rJ#?t<oN`%5%]!<%H$9$k$h$&$K(B, PC $B%+!<%I%I%i%$(B
$B%P$H(B pccardc(8) $B%3%^%s%I$rJQ99$7$^$7$?(B.

The twe(4) driver for 3Ware Escalade controllers has been updated.

3Ware Escalade $B%3%s%H%m!<%i$N$?$a$N(B twe(4) $B%I%i%$%P$r99?7$7$^$7$?(B.

The an(4) driver for Cisco Aironet cards now supports Wired Equivalent
Privacy (WEP) encryption, settable via ancontrol(8).

Cisco Aironet $B%+!<%I$N$?$a$N(Ban(4)$B%I%i%$%P$r(B, Wired Equivalent Privacy
(WEP) $B0E9f2=J}<0$r%5%]!<%H$9$k$h$&$K$7$^$7$?(B. ancontrol(8) $B$G@)8f$G$-(B
$B$^$9(B.

The ray(4) driver, which supports the Webgear Aviator wireless network
cards, has been committed.  The operation of ray(4) interfaces can be
modified by raycontrol(8).

Webgear Aviator $B%o%$%d%l%9%M%C%H%o!<%/%+!<%I$N$?$a$N(B ray(4) $B%I%i%$%P$r(B
$BAH$_9~$_$^$7$?(B. ray(4) $B%$%s%?%U%'!<%9$NF0:n$O(B raycontrol(8) $B$GJQ99$G$-(B
$B$^$9(B.

Support for the Adaptec FSA family of PCI-SCSI RAID controllers has
been added, in the form of the aac(4) driver.

Adaptec FSA $B%U%!%_%j$N(B PCI-SCSI RAID $B%3%s%H%m!<%i$r(B aac(4) $B%I%i%$%P$G(B
$B%5%]!<%H$7$^$7$?(B.

Linksys Fast Ethernet PCCARD cards supported by the ed(4) driver now
require the addition of flag 0x80000 to their config line in
pccard.conf(5).  This flag is not optional.  These Linksys cards will
not be recognized without it.

ed(4) $B%I%i%$%P$G%5%]!<%H$5$l$F$$$?(B Linksys Fast Ethernet PCCARD $B$N%+!<(B
$B%I$r;H$&$K$O(B, pccard.conf(5) $B$N@_Dj$G(B 0x80000 $B$N%U%i%0$rDI2C$9$kI,MW$,(B
$B$"$j$^$9(B.$B$3$N%U%i%0$OI,?\$G$9(B.$B$3$N%U%i%0$,$J$$$H(B Linksys $B$N%+!<%I$OG'(B
$B<1$5$l$^$;$s(B.

A bug in the ed(4) driver that could cause panics with very short
packets and BPF or bridging active has been fixed.

$BHs>o$KC;$$%Q%1%C%H$H(B, BPF $B$^$?$O%V%j%C%8F0:n$H$NAH9g$;$G%Q%K%C%/$r5/$3(B
$B$92DG=@-$N$"$C$?(B ed(4) $B%I%i%$%P$N%P%0$r=$@5$7$^$7$?(B

A bug in FFS that could cause superblock corruption on very large
filesystems has been corrected.

$BD6BgMFNL%U%!%$%k%7%9%F%`$N%9!<%Q!<%V%m%C%/$r2u$7$F$7$^$&2DG=@-$N$"$C$?(B
FFS $B$N%P%0$r=$@5$7$^$7$?(B.

The cs(4) driver has been updated.

cs(4) $B%I%i%$%P$r99?7$7$^$7$?(B.

bridge(4) and dummynet(4) have received some enhancements and bug fixes.

bridge(4) $B$H(B dummynet(4) $B$r2~NI$7(B, $B%P%0$r=$@5$7$^$7$?(B.

The ahc(4) driver has been updated.  Among various improvements are
improved compatibility with chips in "RAID Port" mode and systems with
AAA and ARO cards installed, as well as performance improvements.

ahc(4) $B%I%i%$%P$r99?7$7$^$7$?(B. "RAID Port" $B%b!<%I$N%A%C%W$X$NBP1~$d(BAAA 
$B%+!<%I(B, ARO $B%+!<%I$X$NBP1~$,$h$jNI$/$J$C$?$3$H(B, $B@-G=$N8~>eEy(B, $BB?$/$N2~(B
$BNI$r9T$J$$$^$7$?(B.

The cd(4) driver now has support for write operations.  This allows
writing to DVD-RAM, PD and similar drives that probe as CD devices.
Note that change affects only random-access writeable devices, not
sequential-only writeable devices such as CD-R drives, which are
supported by cdrecord(1).

cd(4) $B%I%i%$%P$r=q$-9~$_F0:n$KBP1~$5$;$^$7$?(B.$B$3$NBP1~$K$h$j(B, CD $B%G%P%$(B
$B%9$N0l<o$H$7$FG'<1$5$l$k(B, DVD-RAM $B$d(B PD $B$J$I$N%I%i%$%V$X$N=q$-9~$_$,2D(B
$BG=$K$J$j$^$7$?(B. $B$?$@$7(B, $B$3$NJQ99$O%i%s%@%`%"%/%;%92DG=$J=q$-9~$_%G%P%$(B
$B%9$K4X$9$k$b$N$G$"$j(B, CD-R $B%I%i%$%V$N$h$&$J%7!<%1%s%7%c%k$K$N$_=q$-9~(B
$B$_2DG=$J%G%P%$%9$K$O4X78$J$$$3$H$KCm0U$7$F$/$@$5$$(B. CD-R $B%I%i%$%V$N$h(B
$B$&$J%G%P%$%9$O(B cdrecord(1) $B%3%^%s%I$GBP1~$7$F$$$^$9(B.

The "make buildkernel" procedure has changed slightly.  It now gets
the name of the configuration(s) to build from the KERNCONF variable
(KERNEL is still valid, but deprecated).  The installed kernel name
can be changed with the INSTKERNEL variable.  The NO_KERNELCLEAN
variable prevents cleaning of the kernel build directory (which is now
done via "make clean", rather than "config -r").

"make buildkernel" $B$N=hM}$r>/$7JQ99$7$^$7$?(B. $B%S%k%I$9$k0l$D(B, $B$^$?$OJ#(B
$B?t$N%3%s%U%#%.%e%l!<%7%g%s$NL>A0$r(B KERNCONF $BJQ?t$+$iF@$k$h$&$K$7$^$7$?(B
(KERNEL $BJQ?t$b$^$@;H$($^$9$,(B, $B?d>)$5$l$^$;$s(B). $B%$%s%9%H!<%k$9$k%+!<%M(B
$B%k$NL>A0$O(B INSTKERNEL $BJQ?t$GJQ99$G$-$^$9(B. NO_KERNELCLEAN $BJQ?t$K$h$C$F(B
$B%+!<%M%k$r%S%k%I$9$k%G%#%l%/%H%j$r>C5n(B ($B0JA0$O(B "config -r" $B$G9T$C$F$$(B
$B$^$7$?$,(B, $B:#$O(B "make clean" $B$G<B9T$5$l$^$9(B) $B$7$J$$$h$&$K$G$-$^$9(B.

kobj functionality has been merged from -CURRENT to better support
sound drivers.

$B%5%&%s%I%I%i%$%P$r$h$j$h$/%5%]!<%H$9$k$?$a$K(B, kobj $B5!G=$r(B -CURRENT $B$+(B
$B$i%^!<%8$7$^$7$?(B.

Separate drivers for the SoundBlaster 8 and Soundblaster 16 now
replace an older, unified driver.

SoundBlaster 8 $B$H(B SoundBlaster 16 $B$N%I%i%$%P$rJ,N%$7(B, $B8E$$E}9g%I%i%$%P(B
$B$rCV$-49$($^$7$?(B.

The isp(4) driver has been updated.

isp(4) $B%I%i%$%P$r99?7$7$^$7$?(B.

ipfilter has been updated to 3.4.16.

ipfilter $B$r(B 3.4.16 $B$K99?7$7$^$7$?(B.

ipfw(8) has a new feature ("me") that allows for packet matching on
interfaces with dynamically-changing IP addresses.

ipfw(8) $B$K?75!G=(B ("me") $B$rDI2C$7$^$7$?(B. $B$3$N5!G=$K$h$jF0E*$K(B IP $B%"%I%l(B
$B%9$,JQ99$5$l$k%$%s%?%U%'!<%9$r85$K$9$k%Q%1%C%HHf3S$r<B9T$G$-$^$9(B.

TCP has received some bug fixes for its delayed ACK behavior.

TCP $B$NCY1d(B ACK $BF0:n$K4X$7$F$$$/$D$+$N%P%0=$@5$r9T$$$^$7$?(B.

TCP now supports the NewReno modification to the TCP Fast Recovery
algorithm.  This behavior can be controlled via the
net.inet.tcp.newreno sysctl variable.

TCP $B$K(B, TCP Fast Recovery $B%"%k%4%j%:%`$KBP1~$9$k(B NewReno $B$NJQ99$r9T$$(B
$B$^$7$?(B. $B$3$N?6$kIq$$$O(B net.inet.tcp.newreno sysctl $BJQ?t$G@)8f$G$-$^$9(B.

TCP now uses a more aggressive timeout for initial SYN segments; this
allows initial connection attempts to be dropped much faster.

TCP $B$r(B, $B=i4|(B SYN $B%;%0%a%s%H$KBP$9$k%?%$%`%"%&%H$r$h$j@Q6KE*$K9T$&$h$&(B
$B$K$7$^$7$?(B. $B$3$NJQ99$K$h$C$F(B, $B$?$/$5$s$N=i4|@\B3MW5a$r$9$_$d$+$KMn$H$9(B
$B$3$H$,$G$-$^$9(B.

A new sysctl net.inet.ip.check_interface, which is on by default,
causes IP to verify that an incoming packet arrives on an interface
that has an address matching the packet's destination address.

$B?7$7$$(B net.inet.ip.check_interface sysctl $BJQ?t$rF3F~$7$^$7$?(B. $B$3$NJQ?t(B
$B$N%G%U%)%k%H$O(B on $B$G(B, $BE~Ce$7$?%Q%1%C%H$,(B, $B$=$N%Q%1%C%H$N(B destination 
$B%"%I%l%9$K0lCW$9$k%"%I%l%9$r;}$D%$%s%?%U%'!<%9$+$iE~Ce$7$?$N$+$I$&$+$N(B
$B8!>Z$r9T$$$^$9(B.

The ata(4) driver has been updated.

ata(4) $B%I%i%$%P$r99?7$7$^$7$?(B.

kqueue(2) has been extended to the device layer, and has also received
some bug fixes.

kqueue(2) $B$r%G%P%$%9AX$^$G3HD%$7(B, $B$^$?$$$/$D$+$N%P%0=$@5$r9T$$$^$7$?(B.

The pcm(4) driver now supports the CMedia CMI8338/CMI8738 sound chips,
as well as the CS4281 sound chip.

pcm(4) $B%I%i%$%P$r(B, CMedia CMI8338/CMI8738 $B%5%&%s%I%A%C%W$H(B CS4281 $B%5%&(B
$B%s%I%A%C%W$r%5%]!<%H$9$k$h$&$K$7$^$7$?(B.

When sound modules are built, one can now load all the drivers and
infrastructure by "kldload snd".

$B%5%&%s%I$N(B module $B$,:n@.$5$l$F$$$l$P(B, $BA4$F$N%5%&%s%I%I%i%$%P72$H$=$N4p(B
$BHW5!G=$r(B "kldload snd" $B$G%m!<%I$G$-$k$h$&$K$7$^$7$?(B.

Some signal-handling fixes for Linux have been added, which improves
compatibility with signal-intensive programs running under Linux
emulation.

Linux $B$N%7%0%J%k%O%s%I%j%s%0$K4X$9$k=$@5$rDI2C$7$^$7$?(B. $B$3$N=$@5$K$h$C(B
$B$F(B, Linux $B%(%_%e%l!<%7%g%s2<$GF0:n$9$k(B, $B%7%0%J%k$r$h$/;H$&%W%m%0%i%`$K(B
$BBP$9$k8_49@-$r9b$a$^$7$?(B.

The ISO-9660 filesystem now has a hook that supports a loadable
character conversion routine.  The sysutils/cd9660_unicode port
contains a set of common conversions.

ISO-9660 $B%U%!%$%k%7%9%F%`$K(B, $B%m!<%@%V%k$JJ8;zJQ49%k!<%A%s$r%5%]!<%H$9(B
$B$k%U%C%/$rDI2C$7$^$7$?(B. port $B$N(B sysutils/cd9660_unicode $B$O$h$/;H$o$l$k(B
$BJQ49J}<0$r<BAu$7$F$$$^$9(B.

ICMP UNREACH_FILTER_PROHIB messages can now RST TCP connections in the
SYN_SENT state if the correct sequence numbers are sent back, as
controlled by the net.inet.tcp.icmp_may_rst sysctl.

SYN_SENT $B>uBV$K$"$k(B TCP $B%3%M%/%7%g%s$,(B, $B@5$7$$%7!<%1%s%9HV9f$r;}$D(B 
ICMP UNREACH_FILTER_PROHIB $B%a%C%;!<%8$K$h$C$F(B RST $B$H$J$k$h$&$K$7$^$7$?(B. 
$B$3$N?6$kIq$$$O(B net.inet.tcp.icmp_may_rst sysctl $BJQ?t$K$h$j@)8f$G$-$^$9(B.

The ida disk driver now has crashdump support.

ida $B%G%#%9%/%I%i%$%P$r%/%i%C%7%e%@%s%W$r%5%]!<%H$9$k$h$&$K$7$^$7$?(B.

1.2. SECURITY FIXES
1.2. $B%;%-%e%j%F%#>e$N=$@5(B
-------------------

Some fixes were applied to the Kerberos IV implementation related to
environment variables, a possible buffer overrun, and overwriting
ticket files.

$B4D6-JQ?t$NLdBj(B, $B%P%C%U%!%*!<%P%i%s$N2DG=@-(B, $B%A%1%C%H%U%!%$%k$N>e=q$-$N(B
$BLdBj$K4X$7(B, Kerberos IV $B$N<BAu$KBP$9$k$$$/$D$+$N=$@5$r9T$$$^$7$?(B.

telnet(1) now does a better job of sanitizing its environment.

$B4D6-JQ?t$r$h$jNI$/>t2=$9$k$h$&$K(B telnet(1) $B$rJQ99$7$^$7$?(B.

Several vulnerabilities in procfs(4) were fixed (see security advisory
FreeBSD-SA-00:77).

procfs(4) $B$K4X$9$k$$$/$D$+$N@H<e@-$r=$@5$7$^$7$?(B ($B%;%-%e%j%F%#4+9p$N(B
FreeBSD-SA-00:77 $B$r;2>H$7$F$/$@$5$$(B).

A bug in ipfw(8) and ipfw6(8) in which inbound TCP segments could
incorrectly be treated as being part of an "established" connection
has been fixed (see security advisory FreeBSD-SA-01:08).

ipfw(8) $B$H(B ipfw6(8) $B$N(B, $BF~NO$5$l$?(B TCP $B%Q%1%C%H$r4V0c$C$F!V3NN):Q$_!W(B
$B@\B3$N0lIt$H8+$J$7$F$7$^$&%P%0$r=$@5$7$^$7$?(B ($B%;%-%e%j%F%#4+9p$N(B 
FreeBSD-SA-01:08 $B$r;2>H$7$F$/$@$5$$(B).

A bug in crontab(8) that could allow users to read any file on the
system in valid crontab(5) syntax has been fixed (see security
advisory FreeBSD-SA-01:09).

crontab(8) $B$N(B, $B%7%9%F%`Cf$N(B crontab(5) $B$NJ8K!$KB'$C$?7A<0$N%U%!%$%k$r(B
$BA4$FFI$a$F$7$^$&$H$$$&%P%0$r=$@5$7$^$7$?(B ($B%;%-%e%j%F%#4+9p$N(B 
FreeBSD-SA-01:09 $B$r;2>H$7$F$/$@$5$$(B).

A vulnerability in inetd(8) that could allow read-access to the
initial 16 bytes of wheel-accessible files has been fixed (see
security advisory FreeBSD-SA-01:11).

inetd(8) $B$N(B, wheel $B$,%"%/%;%9$G$-$k%U%!%$%k$N;O$a$N(B 16 $B%P%$%H$NFI$_$H(B
$B$j$r5v$7$F$7$^$&$H$$$&@H<e@-$r=$@5$7$^$7$?(B ($B%;%-%e%j%F%#4+9p$N(B
FreeBSD-SA-01:11 $B$r;2>H$7$F$/$@$5$$(B).

A bug in periodic(8) that used insecure temporary files has been
corrected (see security advisory FreeBSD-SA-01:12).

periodic(8) $B$N(B, $B0l;~%U%!%$%k$r0BA4$G$J$$J}K!$G<h$j07$&%P%0$rD>$7$^$7$?(B
($B%;%-%e%j%F%#4+9p$N(B FreeBSD-SA-01:12 $B$r;2>H$7$F$/$@$5$$(B).

To fix a remotely-exploitable buffer overflow, BIND has been updated
to 8.2.3 (see security advisory FreeBSD-SA-01:18).

$B%j%b!<%H$+$i967b2DG=$J%P%C%U%!%*!<%P%U%m!<LdBj$r=$@5$9$k$?$a$K(B, BIND 
$B$r(B 8.2.3 $B$K99?7$7$^$7$?(B ($B%;%-%e%j%F%#4+9p(B FreeBSD-SA-01:18 $B$r;2>H$7$F(B
$B$/$@$5$$(B).

OpenSSH now has code to prevent (instead of just mitigating through
connection limits) an attack that can lead to guessing the server key
(not host key) by regenerating the server key when an RSA failure is
detected (see security advisory FreeBSD-SA-01:24).

RSA $B$N<:GT$,8!=P$5$l$?$H$-$K%5!<%P80$r:F@8@.$9$k;v$K$h$C$F(B, $B%5!<%P80(B 
($B%[%9%H80$G$O$"$j$^$;$s(B) $B$r?dB,2DG=$H$9$k$h$&$J967b$r(B, ($B@\B3?t@)8B$K$h(B
$B$j967b$r<e$a$k$N$G$O$J$/(B) $B<WCG$9$k$h$&$K$9$k%3!<%I$r(B OpenSSH $B$K2C$($^(B
$B$7$?(B ($B%;%-%e%j%F%#4+9p(B FreeBSD-SA-01:24 $B$r;2>H$7$F$/$@$5$$(B).

A number of programs have had output formatting strings corrected so
as to reduce the risk of vulnerabilities.

$B@H<e@-$N%j%9%/$r8:$i$9$?$a$K(B, $BB?$/$N%W%m%0%i%`$N=q<0;XDjJ8;zNs$r=$@5$7(B
$B$^$7$?(B.

A number of programs that use temporary files now do so more securely.

$B0l;~%U%!%$%k$rMxMQ$9$kB?$/$N%W%m%0%i%`$r(B, $B$h$j0BA4$KF0:n$9$k$h$&$K$7$^(B
$B$7$?(B.

A bug in ICMP that could cause an attacker to disrupt TCP and UDP
"sessions" has been corrected.

$B967b<T$,(B, TCP $B$H(B UDP $B$N!V%;%C%7%g%s!W$rCfCG$5$;$k$3$H$,$G$-$k(B ICMP $B$N(B
$B%P%0$r=$@5$7$^$7$?(B.


1.3. USERLAND CHANGES
1.3. $B%f!<%6%i%s%I$G$NJQ99(B
---------------------

newfs(1) now implements write combining, which can make creation of
new filesystems up to seven times faster.

newfs(1) $B$K%i%$%H%3%s%P%$%K%s%0$r<BAu$7$?$N$G(B, $B?7$7$$%U%!%$%k%7%9%F%`(B
$B$N:n@.$,:GBg$G(B 7 $BG\B.$/$J$j$^$7$?(B.

A number of buffer overflows in config(8) have been fixed.

config(8) $B$NB?$/$N%P%C%U%!%*!<%P%U%m!<$r=$@5$7$^$7$?(B.

Binutils have been upgraded to 2.10.1.

binutils $B$r(B 2.10.1 $B$K99?7$7$^$7$?(B.

OpenSSL has been upgraded to 0.9.6.

OpenSSL $B$r(B 0.9.6 $B$K99?7$7$^$7$?(B.

file(1) has been contribify-ed, and imported as version 3.33.

file(1) $B$r(B contrib $B$N2<$KCV$/$h$&$K$7(B, $B%P!<%8%g%s(B 3.33 $B$rF3F~$7$^$7$?(B.

groff(1) and its related utilities have been updated to FSF version
1.16.1.

groff(1) $B$H4XO"%f!<%F%#%j%F%#$r(B FSF $BHG(B 1.16.1 $B$K99?7$7$^$7$?(B.

indent(1) has gained some new formatting options.

indent(1) $B$K$$$/$D$+$N%U%)!<%^%C%H%*%W%7%g%s$rDI2C$7$^$7$?(B.

sysinstall now uses some more intuitive defaults thanks to some new
dialog support functions.

dialog $B$N?7$7$$5!G=$r;H$C$F(B, sysinstall $B$r$h$jD>46E*$J%G%U%)%k%HCM$r;H(B
$B$&$h$&$KJQ99$7$^$7$?(B.

libdisk can now do install-time configuration of the i386 boot0 boot
loader.

libdisk $B$r(B, i386 $B$N(B boot0 $B%V!<%H%m!<%@$r%$%s%9%H!<%k;~$K@_Dj$G$-$k$h$&(B
$B$K$7$^$7$?(B.

rm(1) -v now displays the entire pathname of a file being
removed.

rm(1) -v $B$r(B, $B:o=|$7$h$&$H$9$k%U%!%$%k$NA4$F$N%Q%9%M!<%`$rI=<($9$k$h$&(B
$B$KJQ99$7$^$7$?(B.

lpr(1), lpq(1), and lpd(8) have received a few minor enhancements.

lpr(1) $B$H(B lpq(1), lpd(8) $B$K$$$/$D$+$N>.$5$J2~NI$r9T$$$^$7$?(B.

OpenSSH has been upgraded to 2.3.0.  This version adds support for the
Rijndael encryption algorithm.

OpenSSH $B$r(B 2.3.0 $B$K99?7$7$^$7$?(B. $B$3$N%P!<%8%g%s$G$O(B Rijndael $B0E9f2=%"(B
$B%k%4%j%:%`$,DI2C$5$l$F$$$^$9(B.

syslogd(8) now supports a "LOG_CONSOLE" facility (disabled by
default), which can be used to log /dev/console output.

syslogd(8) $B$K(B "LOG_CONSOLE" $B5!G=$rDI2C$7$^$7$?(B ($B%G%U%)%k%H$G$O6X;_$5$l(B
$B$F$$$^$9(B). $B$3$N5!G=$K$h$j(B /dev/console $B$X$N=PNO$r%m%0$G$-$^$9(B.

cdcontrol(1) now uses the CDROM environment variable to pick a default
device.

cdcontrol(1) $B$r(B, CDROM $B4D6-JQ?t$G%G%U%)%k%H$N%G%P%$%9$r;XDj$G$-$k$h$&(B
$B$K$7$^$7$?(B.

All packages and ports now contain an "origin" directive, which makes
it easier for programs like pkg_version(1) to determine the directory
from which a package was built.

$BA4$F$N(B package $B$H(B port $B$O(B "origin" $B;XDj$r4^$`$h$&$K$J$j$^$7$?(B. $B$3$l$K(B
$B$h$j(B pkg_version(1) $B$N$h$&$J%W%m%0%i%`$,(B package $B$,$I$N%G%#%l%/%H%j$G(B
$B:n@.$5$l$?$N$+$rH=CG$7$d$9$/$J$j$^$9(B.

awk has been upgraded from gawk-3.0.4 to gawk-3.0.6.  This fixes a number
of non-critical bugs and includes a few performance tweaks.

awk $B$r(B gawk-3.0.4 $B$+$i(B gawk-3.0.6 $B$K99?7$7$^$7$?(B. $B$3$N99?7$K$h$j(B, $B?tB?(B
$B$/$NCWL?E*$G$O$J$$%P%0$,=$@5$5$l(B, $B$^$?>/!9@-G=$,$"$,$j$^$9(B.

Shortly after the receipt of a SIGINFO signal (normally control-T from
the controlling tty), fsck(8) will now output a line indicating the
current phase number and progress information relevant to the current
phase.

SIGINFO $B%7%0%J%k(B ($BDL>o$O@)8f(B tty $B$G(B control-T $B$r2!$9$3$H$K$h$jH/@8$9$k(B) 
$B$r<u$1$k$H$9$0$K(B, $B8=:_$N%U%'!<%:HV9f$H8=%U%'!<%:Cf$N?J9TEY9g$$$r<($90l(B
$B9T$r=PNO$9$k$h$&$K(B, fsck(8) $B$rJQ99$7$^$7$?(B.

pwd(1) can now double as realpath(1), a program to resolve pathnames
to their underlying physical paths.

pwd(1) $B$K(B realpath(1) $B$N5!G=$r2C$($^$7$?(B. realpath $B$H$7$F$NF0:n$O(B, $B$$(B
$B$m$$$m$J%Q%9L>$r<B:]$NJ*M}E*$J%Q%9L>$X$H2r7h$9$k$b$N$G$9(B.

gcc now uses a unified libgcc rather than a separate one for threaded
and non-threaded programs.  /usr/lib/libgcc_r.a can be removed.

$B%9%l%C%I%W%m%0%i%`BP1~HG$HHs%9%l%C%I%W%m%0%i%`BP1~HG$rE}9g$7$?(B libgcc 
$B$rMQ$$$k$h$&$K(B gcc $B$rJQ99$7$^$7$?(B. /usr/lib/libgcc_r.a $B$O:o=|$7$F$+$^(B
$B$$$^$;$s(B.

config(8) is now better about converting various warnings that should
have been errors into actual fatal errors with an exit code.  This
ensures that that 'make buildkernel' doesn't quietly ignore them and
build a bogus kernel without a human to read the errors.

config(8) $B$r(B, $B85!9%(%i!<$H$J$k$Y$-$@$C$?B?$/$N7Y9p$r<B:]$N%(%i!<$H$7(B, 
$B=*N;%3!<%I$KH?1G$5$;$k$h$&$K$7$^$7$?(B. $B$3$NJQ99$K$h$j(B, 'make
buildkernel' $B$,$J$K$bJ86g$r8@$o$:$K$=$l$i$N%(%i!<$rL5;k$7(B, $B%f!<%6$,$=(B
$B$l$K5$$,$D$/$3$H$J$/F0$+$J$$%+!<%M%k$r:n$C$F$7$^$&$H$$$&$3$H$,$J$/$J$j(B
$B$^$7$?(B.

In /etc/ssh/sshd_config, the ConnectionsPerPeriod parameter has been
deprecated in favor of MaxStartups.

/etc/ssh/sshd_config $B$K$*$$$F(B, $B8E$$(B ConnectionsPerPeriod $B%Q%i%a!<%?$N(B
$BBe$o$j$K(B MaxStartups $B$r;H$&$h$&$K$7$^$7$?(B.

find(1) now takes the -empty flag, which returns true if a file or
directory is empty.

find(1) $B$K(B -empty $B%U%i%0$rDI2C$7$^$7$?(B. $B$3$N%U%i%0$O%U%!%$%k$^$?$O%G%#(B
$B%l%/%H%j$,6u$N;~$K??$rJV$7$^$9(B.

find(1) now takes the -iname and -ipath primaries for case-insensitive
matches, and the -regexp and -iregexp primaries for regular-expression
matches.  The -E flag now enables extended regular expressions.

find(1) $B$K(B -iname $B$H(B -ipath $B%W%i%$%^%j$rDI2C$7$^$7$?(B. $B$3$l$i$O$=$l$>$l(B
$B1Q;z$NBgJ8;z!&>.J8;z$N0c$$$rL5;k$7$FHf3S$7$^$9(B. $B$5$i$K(B -regexp $B$H(B 
-iregexp $B%W%i%$%^%j$bDI2C$7$^$7$?(B. $B$3$l$i$O@55,I=8=$r;H$C$FHf3S$7$^$9(B.
-E $B%U%i%0$K$h$C$F3HD%@55,I=8=$rM-8z$K$9$k$3$H$,$G$-$^$9(B.

ldconfig(8) now checks directory ownerships and permissions for
greater security; these checks can be disabled with the -i
flag.

$B%;%-%e%j%F%#$r8~>e$9$k$?$a(B, ldconfig(8) $B$r%G%#%l%/%H%j$N%*!<%J$H%Q!<%_%C(B
$B%7%g%s$r%A%'%C%/$9$k$h$&$KJQ99$7$^$7$?(B. $B$3$N%A%'%C%/$O(B -i $B%U%i%0$GL58z(B
$B$K$G$-$^$9(B.

sendmail(8) and associated utilities upgraded from version 8.11.1 to
version 8.11.3.  See /usr/src/contrib/sendmail/RELEASE_NOTES for more
information.

sendmail(8) $B$H4XO"%f!<%F%#%j%F%#$r%P!<%8%g%s(B 8.11.1 $B$+$i(B 8.11.3 $B$K99?7(B
$B$7$^$7$?(B. $B>\$7$/$O(B /usr/src/contrib/sendmail/RELEASE_NOTES $B$r$4Mw$/$@(B
$B$5$$(B.

New make.conf options: SENDMAIL_MC and SENDMAIL_ADDITIONAL_MC.  See
/etc/defaults/make.conf for more information.

make.conf $B$K%*%W%7%g%s$rDI2C$7$^$7$?(B: SENDMAIL_MC $B$H(B
SENDMAIL_ADDITIONAL_MC $B$G$9(B. $B>\$7$/$O(B /etc/defaults/make.conf $B$r$4Mw$/(B
$B$@$5$$(B.

The Makefile in /etc/mail now supports: the new SENDMAIL_MC make.conf
option; the ability to build .cf files from .mc files; generalized map
rebuilding; rebuilding the aliases file; and the ability to stop, start,
and restart sendmail.

/etc/mail $B$K$"$k(B Makefile $B$r3HD%$7$^$7$?(B: make.conf $B$N(B SENDMAIL_MC $B%*(B
$B%W%7%g%s$N2r<a(B; .mc $B%U%!%$%k$+$i(B .cf $B%U%!%$%k$N@8@.(B; $B0lHL2=$5$l$?(B map 
$B$N:F9=@.(B; aliases $B%U%!%$%k$N:F9=@.(B; sendmail $B$rDd;_(B, $B<B9T(B, $B:F<B9T$5$;(B
$B$k5!G=(B.

pkg_info(1) can now accept a -g flag for verifying an installed
package against its recorded checksums (to see if it's been modified
post-installation).  Naturally, this mechanism is only as secure as
the contents of /var/db/pkg if it's to be used for auditing
purposes.

pkg_info(1) $B$K(B -g $B%U%i%0$rDI2C$7$^$7$?(B. -g $B%U%i%0$K$h$C$F(B, $B%$%s%9%H!<(B
$B%k$5$l$?%Q%C%1!<%8$r5-O?$5$l$?%A%'%C%/%5%`$HHf3S>H9g$9$k$3$H$,$G$-$^$9(B
($B%$%s%9%H!<%k8e$K2?$+JQ99$,$"$C$?$+$I$&$+$r8+$k$?$a$K(B). $B$3$N5!9=$r%7%9(B
$B%F%`4F::$H$7$F$H$i$($k$N$J$i(B, $BEvA3$J$,$i(B, $B$=$N@5Ev@-$O(B /var/db/pkg $B$N(B
$BFbMF$N0BA4@-$K0MB8$7$^$9(B.

vidcontrol(1) now accepts a -g parameter to select custom text
geometry in the VESA_800x600 raster text mode.

vidcontrol(1) $B$K(B, VESA_800x600 $B%i%9%?%F%-%9%H%b!<%I$N$J$+$+$iG$0U$N%F(B
$B%-%9%H%5%$%:$rA*$V$?$a$N(B -g $B%Q%i%a!<%?$rDI2C$7$^$7$?(B.XXXXX

The rfork_thread(3) library call has been added as a helper function
to rfork(2).  Using this function should avoid the need to implement
complex stack swap code.

rfork(2) $B$NJd=u5!G=$H$7$F(B, rfork_thread(3) $B%i%$%V%i%j4X?t$rDI2C$7$^$7(B
$B$?(B.  $B$3$N4X?t$K$h$j(B, $BJ#;($J%9%?%C%/8r49%3!<%I$r<BAu$9$kI,MW$,$J$/$J$j(B
$B$^$9(B.

The compat3x distribution has been updated to include libraries
present in FreeBSD 3.5.1-RELEASE.

compat3x $B%G%#%9%H%j%S%e!<%7%g%s$r99?7$7(B, FreeBSD 3.5.1-RELEASE $B$K4^$^(B
$B$l$k%i%$%V%i%j$r<h$j9~$_$^$7$?(B.

gperf has been updated to 2.7.2.

gperf $B$r(B 2.7.2 $B$K99?7$7$^$7$?(B.

pkg_create(1) and pkg_add(1) can now work with packages that have
been compressed using bzip2(1).  pkg_add(1) will use the
PACKAGEROOT environment variable to determine a mirror site for new
packages.

pkg_create(1) $B$H(B pkg_install(1) $B$r(B, bzip2(1) $B$G05=L$5$l$?%Q%C%1!<%8$K(B
$BBP1~$G$-$k$h$&$K$7$^$7$?(B. pkg_add(1) $B$r(B PACKAGEROOT $B4D6-JQ?t$r;2>H$9$k(B
$B$h$&$KJQ99$7$^$7$?(B. $B$3$N4D6-JQ?t$G(B, $B?7$7$$%Q%C%1!<%8$N%_%i!<%5%$%H$r;X(B
$B<($G$-$^$9(B.


Catching up with most other network utilities in the base system,
lpr(1), lpd(8), syslogd(8), and logger(1) are now all IPv6-capable.

$B4pK\%7%9%F%`$K4^$^$l$k(B, $B%M%C%H%o!<%/%f!<%F%#%j%F%#$N;D$j(B, $B$9$J$o$A(B
lpr(1), lpd(8), syslogd(8), logger(1) $B$r(B IPv6 $B$KBP1~$5$;$^$7$?(B.

sysinstall(8) now properly preserves /etc/mail during a binary
upgrade.

sysinstall(8) $B$r%P%$%J%j%"%C%W%0%l!<%I$N;~$K(B /etc/mail $B$r@5$7$/J]B8$9(B
$B$k$h$&=$@5$7$^$7$?(B.

When requested to delete multiple packages, pkg_delete(1) will now
attempt to remove them in dependency order rather than the order
specified on the command line.

$BJ#?t$N%Q%C%1!<%8$r:o=|$9$k$h$&$K;X<($5$l$?$H$-$K(B, $B0MB8=g$K=>$C$F3F%Q%C(B
$B%1!<%8$r:o=|$9$k$h$&$K(B pkg_delete(1) $B$rJQ99$7$^$7$?(B. $B0JA0$O%3%^%s%I%i(B
$B%$%s$G;X<($5$l$?=g$K=>$C$F$$$^$7$?(B.

pkg_info(1) now supports globbing against names of installed packages.
The -G option disables this behavior, and the -x option causes regular
expression matching instead of shell globbing.

pkg_info(1) $B$r(B, $B%$%s%9%H!<%k$5$l$?%Q%C%1!<%8L>$KBP$7$F%a%?%-%c%i%/%?$r(B
$B;H$($k$h$&$KJQ99$7$^$7$?(B. -G $B%*%W%7%g%s$G$3$N?6$kIq$$$r6X;_$G$-$^$9(B.
$B$^$?(B, -x $B%*%W%7%g%s$K$h$j(B, shell $B$N%a%?%-%c%i%/%?$G$J$/@55,I=8=$G%^%C(B
$B%A$5$;$k$h$&$K$G$-$^$9(B.

burncd(8) now supports a -m option for multisession mode (the default
behavior now is to close disks as single-session).  A -l option to
take a list of image files from a filename was also added; '-' can be
used as a filename for stdin.

burncd(8) $B$K(B, $B%^%k%A%;%C%7%g%s%b!<%I$r%5%]!<%H$9$k(B -m $B%*%W%7%g%s$rDI2C(B
$B$7$^$7$?(B. $B%G%U%)%k%H$G$O%7%s%0%k%;%C%7%g%s$H$7$F%G%#%9%/$r%/%m!<%:$7$^(B
$B$9(B. -l $B%*%W%7%g%s$G(B, $B;XDj$7$?%U%!%$%k$+$i%$%a!<%8%U%!%$%kL>$N%j%9%H$r(B
$B<hF@$9$k$h$&$K$G$-$^$9(B. '-' $B$GI8=`F~NO$+$i%U%!%$%k$N%j%9%H$r<hF@$7$^$9(B.

tar(1) now supports the TAR_RSH variable, principally to enable the
use of ssh(1) as a transport.

tar(1) $B$r(B TAR_RSH $B4D6-JQ?t$r8+$k$h$&$KJQ99$7$^$7$?(B. $B$=$N<g$JL\E*$O(B
ssh(1) $B$rE>Aw<jCJ$H$7$F;H$($k$h$&$K$9$k$3$H$G$9(B.

make(1) has received a number of bugfixes.

make(1) $B$K$$$/$D$b$N%P%0=$@5$r;\$7$^$7$?(B.

Boot-time syscons configuration was moved to a machine-independent
rc.syscons.

$B%V!<%H;~$N(B syscons $B$N@_Dj$r(B, $B%^%7%sFHN)$J(B rc.syscons $B$G9T$&$h$&$KJQ99(B
$B$7$^$7$?(B.

login(1) now exports environment variables set by PAM modules.

login(1) $B$r(B, PAM $B%b%8%e!<%k$G@_Dj$5$l$?4D6-JQ?t$r%(%/%9%]!<%H$9$k$h$&(B
$B$KJQ99$7$^$7$?(B.

ipfstat(8) now supports the -t option to turn on a top(1)-like
display.

ipfstat(8) $B$K(B, top(1) $B$N$h$&$JI=<(J}K!$r9T$o$;$k(B -t $B%*%W%7%g%s$rDI2C$7(B
$B$^$7$?(B.

pkg_sign(1) and pkg_check(1) have been added to digitally sign and
verify the signatures on binary package files.

package $B$N%P%$%J%j%U%!%$%k$N%G%8%?%k=pL>$r:n@.$*$h$S8!>Z$9$k$?$a$N(B,
pkg_sign(1) $B$H(B pkg_check(1) $B$rDI2C$7$^$7$?(B.

2. Supported Configurations
2. $B%5%]!<%H$7$F$$$k9=@.(B
---------------------------
FreeBSD currently runs on a wide variety of ISA, VLB, EISA, MCA and PCI
bus based PC's, ranging from 386sx to Pentium class machines (though the
386sx is not recommended).  Support for generic IDE drive
configurations, various SCSI controller, network and serial cards is
also provided.

FreeBSD $B$O8=:_(B, ISA, VLB, EISA, MCA, PCI $B%P%9$N(B 386SX $B$+$i(B Pentium $B%/(B
$B%i%9$^$G$N$5$^$6$^$J<oN`$N(B PC $B$GF0:n$7$^$9(B ($B$?$@$7(B 386SX $B$O$*4+$a$G$-(B
$B$^$;$s(B).  $B0lHLE*$J(B IDE $B%I%i%$%V$d(B, $B$5$^$6$^$J(B SCSI $B%3%s%H%m!<%i(B, $B%M%C(B
$B%H%o!<%/%+!<%I(B, $B%7%j%"%k%+!<%I$KBP1~$7$F$$$^$9(B.


What follows is a list of all peripherals currently known to work with
FreeBSD.  Other configurations may also work, we have simply not as yet
received confirmation of this.

$B0J2<$K5-:\$5$l$F$$$k$N$O(B, FreeBSD $B$GF0:n$9$k$3$H$,8=:_3NG'$5$l$F$$$k$9(B
$B$Y$F$N<~JU5!4o$N%j%9%H$G$9(B. $B$=$NB>$N9=@.$G$bF0:n$9$k2DG=@-$,$"$j$^$9$,(B, 
$B$=$l$OC1$K(B, $B$^$@;d$?$A$,F0:n3NG'$NJs9p$r<u$1$H$C$F$$$J$$$H$$$&$@$1$G$9(B.

2.1. Disk Controllers
2.1. $B%G%#%9%/%3%s%H%m!<%i(B
---------------------
IDE
ATA

Adaptec 1535 ISA SCSI controllers
Adaptec 1535 ISA SCSI $B%3%s%H%m!<%i(B

Adaptec 154x series ISA SCSI controllers
Adaptec 154x $B%7%j!<%:(B ISA SCSI $B%3%s%H%m!<%i(B

Adaptec 164x series MCA SCSI controllers
Adaptec 164x $B%7%j!<%:(B MCA SCSI $B%3%s%H%m!<%i(B

Adaptec 174x series EISA SCSI controller in standard and enhanced mode.
Adaptec 174x $B%7%j!<%:(B EISA SCSI $B%3%s%H%m!<%i(B
        ($B%9%?%s%@!<%I(B, $B%(%s%O%s%9%I%b!<%I(B)

Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) series
EISA/VLB/PCI SCSI controllers.
Adaptec 274X/284X/2920C/294x/2950/3940/3950 (Narrow/Wide/Twin) $B%7%j!<%:(B
        EISA/VLB/PCI SCSI $B%3%s%H%m!<%i(B

Adaptec AIC7850, AIC7860, AIC7880, AIC789x, on-board SCSI controllers.
Adaptec AIC7850, AIC7860, AIC7880, AIC789x $B%*%s%\!<%I(B SCSI $B%3%s%H%m!<%i(B

Adaptec 1510 series ISA SCSI controllers (not for bootable devices)
Adaptec 1510 $B%7%j!<%:(B ISA SCSI $B%3%s%H%m!<%i(B ($B5/F0$O$G$-$^$;$s(B)

Adaptec 152x series ISA SCSI controllers
Adaptec 152x $B%7%j!<%:(B ISA SCSI $B%3%s%H%m!<%i(B

Adaptec AIC-6260 and AIC-6360 based boards, which includes the AHA-152x
and SoundBlaster SCSI cards.
Adaptec AIC-6260 $B$*$h$S(B AIC-6360 $B%Y!<%9$N%\!<%I(B. $B$3$l$K$O(B
AHA-152x $B$H(B SoundBlaster SCSI $B%+!<%I$,4^$^$l$^$9(B.

Adaptec 1400, 2100S, 3200S, and 3400S SCSI RAID controllers.
Adaptec 1400, 2100S, 3200S, $B$*$h$S(B 3400S SCSI RAID $B%3%s%H%m!<%i(B

Adaptec FSA family RAID controllers:
Adaptec FSA $B%U%!%_%j(B RAID $B%3%s%H%m!<%i(B:
    Adaptec AAC-2622
    Adaptec AAC-364
    Adaptec AAC-3642
    Dell PERC 2/QC
    Dell PERC 2/Si
    Dell PERC 3/Di
    Dell PERC 3/QC
    Dell PERC 3/Si
    HP NetRAID-4M

AdvanSys SCSI controllers (all models).
AdvanSys SCSI $B%3%s%H%m!<%i(B ($BA4%b%G%k(B).

BusLogic MultiMaster controllers:
BusLogic MultiMaster $B%3%s%H%m!<%i(B:

[ Please note that BusLogic/Mylex "Flashpoint" adapters are NOT yet supported ]
[ BusLogic/Mylex "Flashpoint" $B%"%@%W%?$O$^$@%5%]!<%H$5$l$F(B *$B$$$^$;$s(B*]

BusLogic MultiMaster "W" Series Host Adapters:
BusLogic MultiMaster "W" $B%7%j!<%:%[%9%H%"%@%W%?(B:
    BT-948, BT-958, BT-958D

BusLogic MultiMaster "C" Series Host Adapters:
BusLogic MultiMaster "C" $B%7%j!<%:%[%9%H%"%@%W%?(B:
    BT-946C, BT-956C, BT-956CD, BT-445C, BT-747C, BT-757C, BT-757CD, BT-545C,
    BT-540CF

BusLogic MultiMaster "S" Series Host Adapters:
BusLogic MultiMaster "S" $B%7%j!<%:%[%9%H%"%@%W%?(B:
    BT-445S, BT-747S, BT-747D, BT-757S, BT-757D, BT-545S, BT-542D, BT-742A,
    BT-542B

BusLogic MultiMaster "A" Series Host Adapters:
BusLogic MultiMaster "A" $B%7%j!<%:%[%9%H%"%@%W%?(B:
    BT-742A, BT-542B

AMI FastDisk controllers that are true BusLogic MultiMaster clones are also
supported.
BusLogic MultiMaster $B$H40A4$J8_49@-$N$"$k(B AMI FastDisk $B%3%s%H%m!<%i$b(B
$B%5%]!<%H$5$l$F$$$^$9(B.

The Buslogic/Bustek BT-640 and Storage Dimensions SDC3211B and SDC3211F
Microchannel (MCA) bus adapters are also supported.
Buslogic/Bustek BT-640 $B$H(B Storage Dimensions SDC3211B $B$*$h$S(B SDC3211F
$B%^%k%A%A%c%s%M%k(B (MCA) $B%P%9%"%@%W%?$b%5%]!<%H$5$l$F$$$^$9(B.

DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV and
SmartRAID IV SCSI/RAID controllers are supported.
DPT SmartCACHE Plus, SmartCACHE III, SmartRAID III, SmartCACHE IV, 
SmartRAID IV SCSI/RAID $B%3%s%H%m!<%i$O%5%]!<%H$5$l$F$$$^$9(B.

DPT SmartRAID V and VI SCSI RAID controllers:
DPT SmartRAID V $B$*$h$S(B VI SCSI RAID $B%3%s%H%m!<%i(B:
    PM1554, PM2554, PM2654, PM2865, PM2754, PM3755, PM3757

AMI MegaRAID Express and Enterprise family RAID controllers:
AMI MegaRAID Express $B$H(B Enterprise $B%U%!%_%j(B RAID $B%3%s%H%m!<%i(B:
    MegaRAID Series 418
    MegaRAID Enterprise 1200 (Series 428)
    MegaRAID Enterprise 1300 (Series 434)
    MegaRAID Enterprise 1400 (Series 438)
    MegaRAID Enterprise 1500 (Series 467)
    MegaRAID Enterprise 1600 (Series 471)
    MegaRAID Elite 1500 (Series 467)
    MegaRAID Elite 1600 (Series 493)
    MegaRAID Express 100 (Series 466WS)
    MegaRAID Express 200 (Series 466)
    MegaRAID Express 300 (Series 490)
    MegaRAID Express 500 (Series 475)
    Dell PERC
    Dell PERC 2/SC
    Dell PERC 2/DC
    HP NetRAID-1si
    HP NetRAID-3si
    HP Embedded NetRAID
Booting from these controllers is supported.
$B>e5-%3%s%H%m!<%i$+$i$N5/F0$b%5%]!<%H$7$F$$$^$9(B.

Mylex DAC960 and DAC1100 RAID controllers with 2.x, 3.x, 4.x and 5.x
firmware:
Mylex DAC960 $B$*$h$S(B DAC1100 RAID $B%3%s%H%m!<%i(B ($B%U%!!<%`%&%'%"$,(B2.x,
3.x, 4.x $B$*$h$S(B 5.x $B$N$b$N(B):
    DAC960P
    DAC960PD
    DAC960PDU
    DAC960PL
    DAC960PJ
    DAC960PG
    AcceleRAID 150
    AcceleRAID 250
    eXtremeRAID 1100
Booting from these controllers is supported. EISA adapters are not
supported.
$B>e5-%3%s%H%m!<%i$+$i$N5/F0$b%5%]!<%H$7$F$$$^$9(B.
EISA $B%"%@%W%?$O%5%]!<%H$5$l$F$$$^$;$s(B.

Mylex PCI to SCSI RAID controllers with 6.x firmware:
$B%P!<%8%g%s(B 6.x $B$N%U%!!<%`%&%'%"$rEk:\$7$?(BMylex PCI to SCSI RAID $B%3%s%H(B
$B%m!<%i(B:
    AcceleRAID 160
    AcceleRAID 170
    AcceleRAID 352
    eXtremeRAID 2000
    eXtremeRAID 3000
Compatible Mylex controllers not listed should work, but have not been
verified.
$B$3$3$K<($5$l$F$$$J$$(B, $B8_49@-$N$"$k(B Mylex $B%3%s%H%m!<%i$bF0:n$9$k$H;W$o(B
$B$l$^$9$,(B, $B3NG'$O9T$J$o$l$F$$$^$;$s(B.

3ware Escalade ATA RAID controllers.  All members of the 5000 and
6000 series are supported.
3ware Escalade ATA RAID $B%3%s%H%m!<%i(B. 5000 $B$*$h$S(B 6000 $B%7%j!<%:$N$9$Y(B
$B$F$,%5%]!<%H$5$l$F$$$^$9(B.

SymBios (formerly NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
53C860, 53C875, 53C875j, 53C885, 53C895 and 53C896 PCI SCSI controllers:
SymBios ($B5l(B NCR) 53C810, 53C810a, 53C815, 53C820, 53C825a,
53C860, 53C875, 53C875j, 53C885, 53C895 $B$*$h$S(B 53C896 PCI SCSI $B%3%s%H%m!<%i(B:
        ASUS SC-200
        Data Technology DTC3130 (all variants)
        Data Technology DTC3130 ($B$9$Y$F$NJQ<o(B)
	Diamond FirePort (all)
	Diamond FirePort ($B$9$Y$F(B)
        NCR cards (all)
        NCR cards ($B$9$Y$F(B)
        Symbios cards (all)
        Symbios cards ($B$9$Y$F(B)
        Tekram DC390W, 390U and 390F
        Tyan S1365

NCR 53C500 based PC-Card SCSI host adapters:
NCR 53C500 $B%Y!<%9$N(B PC-Card SCSI $B%[%9%H%"%@%W%?(B:
    IO DATA PCSC-DV
    KME KXLC002(TAXAN ICD-400PN, etc.), KXLC004
    KME KXLC002(TAXAN ICD-400PN, $B$J$I(B), KXLC004
    Macnica Miracle SCSI-II mPS110
    Media Intelligent MSC-110, MSC-200
    NEC PC-9801N-J03R
    New Media Corporation BASICS SCSI
    Qlogic Fast SCSI
    RATOC REX-9530, REX-5572 (as SCSI only)
    RATOC REX-9530, REX-5572 (SCSI $B$H$7$F$N$_(B)

TMC 18C30, 18C50 based ISA/PC-Card SCSI host adapters:
TMC 18C30, 18C50 $B%Y!<%9$N(B ISA/PC-Card SCSI $B%[%9%H%"%@%W%?(B:
    Future Domain SCSI2GO
    IBM SCSI PCMCIA Card
    ICM PSC-2401 SCSI
    Melco IFC-SC
    RATOC REX-5536, REX-5536AM, REX-5536M, REX-9836A

QLogic 1020, 1040, 1040B, 1080 and 1240 SCSI Host Adapters.
QLogic 1020, 1040, 1040B, 1080 $B$*$h$S(B 1240 SCSI $B%[%9%H%"%@%W%?(B

QLogic 2100 Fibre Channel Adapters (private loop only).
QLogic 2100 Fibre Channel $B%"%@%W%?(B ($B%W%i%$%Y!<%H%k!<%W$N$_(B).

DTC 3290 EISA SCSI controller in 1542 emulation mode.
DTC 3290 EISA SCSI $B%3%s%H%m!<%i(B(1542 $B%(%_%e%l!<%7%g%s%b!<%I$G(B)

Workbit Ninja SCSI-3 based PC-Card SCSI host adapters:
Workbit Ninja SCSI-3 $B%Y!<%9$N(B PC-Card SCSI $B%[%9%H%"%@%W%?(B:
    Alpha-Data AD-PCS201
    IO DATA CBSC16

With all supported SCSI controllers, full support is provided for
SCSI-I & SCSI-II peripherals, including hard disks, optical disks,
tape drives (including DAT and 8mm Exabyte), medium changers, processor
target devices and CDROM drives.  WORM devices that support CDROM commands
are supported for read-only access by the CDROM driver.  WORM/CD-R/CD-RW
writing support is provided by cdrecord, which is in the ports tree.

$B%5%]!<%H$5$l$k$9$Y$F$N(B SCSI $B%3%s%H%m!<%i$O(B, SCSI-I $B$*$h$S(B SCSI-II $B<~JU(B
$B5!4o$N40A4$J%5%]!<%H$rDs6!$7$^$9(B.  $B$3$l$K$O%O!<%I%G%#%9%/(B, $B8w%G%#%9%/(B,
(DAT $B$H(B 8mm Exabyte $B$r4^$`(B)$B%F!<%W%I%i%$%V(B, $B%a%G%#%"%A%'%s%8%c(B, $B%?!<%2%C(B
$B%H%G%P%$%9$H$7$FF0:n$9$k%W%m%;%C%5(B, CDROM $B%I%i%$%V$,4^$^$l$^$9(B.  CDROM 
$B%3%^%s%I$r%5%]!<%H$9$k(B WORM $B%G%P%$%9$O(B CDROM $B%I%i%$%P$K$h$C$FFI$_<h$j(B
$B@lMQ%"%/%;%9$,%5%]!<%H$5$l$^$9(B. WORM/CD-R/CD-RW $B$X$N=q$-9~$_$O(Bports $B%D(B
$B%j!<$K$"$k(B cdrecord $B$K$h$j%5%]!<%H$5$l$^$9(B.

The following CD-ROM type systems are supported at this time:
$B8=:_(B, $B0J2<$N<oN`$N(B CD-ROM $B%7%9%F%`$,%5%]!<%H$5$l$F$$$^$9(B:

(cd)    SCSI interface (also includes ProAudio Spectrum and
        SoundBlaster SCSI)
(cd)    SCSI $B%$%s%?!<%U%'!<%9(B (ProAudio Spectrum $B$H(B SoundBlaster SCSI 
        $B$b4^$`(B)

(matcd) Matsushita/Panasonic (Creative SoundBlaster) proprietary
        interface (562/563 models)
(matcd) $B>>2<(B/Panasonic (Creative SoundBlaster) $B@lMQ%$%s%?!<%U%'!<%9(B
        (562/563 $B%b%G%k(B)

(scd)   Sony proprietary interface (all models)
(scd)   Sony $B@lMQ%$%s%?!<%U%'!<%9(B ($BA4%b%G%k(B)

(acd)   ATAPI IDE interface
(acd)   ATAPI IDE $B%$%s%?!<%U%'!<%9(B

The following drivers were supported under the old SCSI subsystem, but are
NOT YET supported under the new CAM SCSI subsystem:

$B0J2<$N%I%i%$%P$O8E$$(B SCSI $B%5%V%7%9%F%`$G$O%5%]!<%H$5$l$F$$$^$7$?$,(B, 
$B?7$7$$(B CAM SCSI $B%5%V%7%9%F%`$G$O(B *$B$^$@(B* $B%5%]!<%H$5$l$F$$$^$;$s(B. 

  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI controller.
  NCR5380/NCR53400 ("ProAudio Spectrum") SCSI $B%3%s%H%m!<%i(B

  UltraStor 14F, 24F and 34F SCSI controllers.
  UltraStor 14F, 24F, 34F SCSI $B%3%s%H%m!<%i(B

  Seagate ST01/02 SCSI controllers.
  Seagate ST01/02 SCSI $B%3%s%H%m!<%i(B

  Future Domain 8xx/950 series SCSI controllers.
  Future Domain 8xx/950 $B%7%j!<%:(B SCSI $B%3%s%H%m!<%i(B

  WD7000 SCSI controller.
  WD7000 SCSI $B%3%s%H%m!<%i(B

  [ Note:  There is work-in-progress to port the UltraStor driver to
    the new CAM SCSI framework, but no estimates on when or if it will
    be completed. ]

  [ $BCm(B: UltraStor $B%I%i%$%P$r?7$7$$(B CAM SCSI $B$NOHAH$_$K0\?"$9$k:n6H$,(B
    $B?J9TCf$G$9$,(B, $B$$$D40@.$9$k$+(B, $B$=$7$F40@.$9$k$+$I$&$+$O$o$+$j$^$;$s(B. ]

Unmaintained drivers, they might or might not work for your hardware:

$B0J2<$N%I%i%$%P$OJ]<i$5$l$F$$$^$;$s(B. $B$3$l$i$OF0$/$+$bCN$l$^$;$s$7(B, 
$BF0$+$J$$$+$b$7$l$^$;$s(B:

  (mcd)   Mitsumi proprietary CD-ROM interface (all models)
  (mcd)   Mitsumi $B@lMQ(B CD-ROM $B%$%s%?!<%U%'!<%9(B ($BA4%b%G%k(B)


2.2. Ethernet cards
2.2. $B%$!<%5%M%C%H%+!<%I(B
-------------------

Adaptec Duralink PCI Fast Ethernet adapters based on the Adaptec
AIC-6915 Fast Ethernet controller chip, including the following:

AIC-6915 Fast $B%$!<%5%M%C%H%3%s%H%m!<%i%A%C%W%Y!<%9$N(B
Adaptec Duralink PCI $B%U%!!<%9%H%$!<%5%M%C%H%"%@%W%?(B.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:

  ANA-62011 64-bit single port 10/100baseTX adapter
  ANA-62022 64-bit dual port 10/100baseTX adapter
  ANA-62044 64-bit quad port 10/100baseTX adapter
  ANA-69011 32-bit single port 10/100baseTX adapter
  ANA-62020 64-bit single port 100baseFX adapter

  ANA-62011 64-bit single port 10/100baseTX $B%"%@%W%?(B
  ANA-62022 64-bit dual port 10/100baseTX $B%"%@%W%?(B
  ANA-62044 64-bit quad port 10/100baseTX $B%"%@%W%?(B
  ANA-69011 32-bit single port 10/100baseTX $B%"%@%W%?(B
  ANA-62020 64-bit single port 100baseFX $B%"%@%W%?(B

Allied-Telesis AT1700 and RE2000 cards
Allied-Telesis AT1700 $B$*$h$S(B RE2000 $B%+!<%I(B

Alteon Networks PCI Gigabit Ethernet NICs based on the Tigon 1 and Tigon 2
chipsets, including the following:

Tigon 1 $B$*$h$S(B Tigon 2 $B%A%C%W%;%C%H%Y!<%9$N(B Alteon Networks PCI
$B%.%,%S%C%H%$!<%5%M%C%H(B NIC. $B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B.

  3Com 3c985-SX (Tigon 1 and 2)
  Alteon AceNIC 1000baseSX (Tigon 1 and 2)
  Alteon AceNIC 1000baseT (Tigon 2)
  DEC/Compaq EtherWORKS 1000
  Farallon PN9000SX
  NEC Gigabit Ethernet
  Netgear GA620 (Tigon 2)
  Netgear GA620T (Tigon 2, 1000baseT)
  Silicon Graphics Gigabit Ethernet

  3Com 3c985-SX (Tigon 1 $B$H(B 2)
  Alteon AceNIC 1000baseSX (Tigon 1 $B$H(B 2)
  Alteon AceNIC 1000baseT (Tigon 2)
  DEC/Compaq EtherWORKS 1000
  Farallon PN9000SX
  NEC Gigabit Ethernet
  Netgear GA620 (Tigon 2)
  Netgear GA620T (Tigon 2, 1000baseT)
  Silicon Graphics Gigabit Ethernet

AMD PCnet/PCI (79c970 & 53c974 or 79c974)
AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, PCnet/PRO,
PCnet/Home, and HomePNA.

AMD PCnet/PCI (79c970 & 53c974 $B$O$?$O(B 79c974)
AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, PCnet/PRO,
PCnet/Home, HomePNA.

SMC Elite 16 WD8013 Ethernet interface, and most other WD8003E,
WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT and WD8013EBT
based clones.  SMC Elite Ultra.  SMC Etherpower II.

SMC Elite 16 WD8013 $B%$!<%5%M%C%H%$%s%?%U%'!<%9(B, $B$=$7$F$=$NB>BgItJ,$N(B
WD8003E, WD8003EBT, WD8003W, WD8013W, WD8003S, WD8003SBT $B$H(B WD8013EBT 
$B%Y!<%9$N8_49IJ(B.  SMC Elite Ultra.  SMC Etherpower II.

RealTek 8129/8139 Fast Ethernet NICs including the following:
RealTek 8129/8139 $B%Y!<%9$N%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  Allied Telesyn AT2550
  Allied Telesyn AT2500TX
  Genius GF100TXR (RTL8139)
  NDC Communications NE100TX-E
  OvisLink LEF-8129TX
  OvisLink LEF-8139TX
  Netronix Inc. EA-1210 NetEther 10/100
  KTX-9130TX 10/100 Fast Ethernet
  Accton "Cheetah" EN1207D (MPX 5030/5038; RealTek 8139 clone)
  Accton "Cheetah" EN1207D (MPX 5030/5038; RealTek 8139 $B8_49(B)
  SMC EZ Card 10/100 PCI 1211-TX

Lite-On 82c168/82c169 PNIC Fast Ethernet NICs including the following:
Lite-On 82c168/82c169 PNIC $B%Y!<%9$N%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  LinkSys EtherFast LNE100TX
  NetGear FA310-TX Rev. D1
  Matrox FastNIC 10/100
  Kingston KNE110TX

Macronix 98713, 98713A, 98715, 98715A and 98725 Fast Ethernet NICs
Macronix 98713, 98713A, 98715, 98715A $B$H(B 98725 $B%Y!<%9$N%U%!!<%9%H%$!<(B
$B%5%M%C%H(B NIC
  NDC Communications SFA100A (98713A)
  CNet Pro120A (98713 or 98713A)
  CNet Pro120B (98715)
  SVEC PN102TX (98713)

Macronix/Lite-On PNIC II LC82C115 Fast Ethernet NICs including the following:
Macronix/Lite-On PNIC II LC82C115 $B%Y!<%9$N%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  LinkSys EtherFast LNE100TX Version 2

Winbond W89C840F Fast Ethernet NICs including the following:
Winbond W89C840F $B%Y!<%9$N%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  Trendware TE100-PCIE

VIA Technologies VT3043 "Rhine I" and VT86C100A "Rhine II" Fast Ethernet
NICs including the following:
VIA Technologies $B$N(B VT3043 "Rhine I" $B$H(B VT86C100A "Rhine II" $B%Y!<%9$N(B
$B%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  Hawking Technologies PN102TX
  D-Link DFE-530TX
  AOpen/Acer ALN-320

Silicon Integrated Systems SiS 900 and SiS 7016 PCI Fast Ethernet NICs
Silicon Integrated Systems $B$N(B SiS 900 $B$H(B SiS 7016 PCI $B%U%!!<%9%H%$!<%5(B
$B%M%C%H(B NIC

Sundance Technologies ST201 PCI Fast Ethernet NICs including
the following:
Sundance Technologies $B$N(B ST201 PCI $B%U%!!<%9%H%$!<%5%M%C%H(B NIC
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  D-Link DFE-550TX

SysKonnect SK-984x PCI Gigabit Ethernet cards including the following:
  SK-9841 1000baseLX single mode fiber, single port
  SK-9842 1000baseSX multimode fiber, single port
  SK-9843 1000baseLX single mode fiber, dual port
  SK-9844 1000baseSX multimode fiber, dual port

SysKonnect $B$N(B SK-984x PCI $B%.%,%S%C%H%$!<%5%M%C%H%+!<%I(B.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  SK-9841 1000baseLX $B%7%s%0%k%b!<%I%U%!%$%P(B, 1 $B%]!<%H(B
  SK-9842 1000baseSX $B%^%k%A%b!<%I%U%!%$%P(B, 1 $B%]!<%H(B
  SK-9843 1000baseLX $B%7%s%0%k%b!<%I%U%!%$%P(B, 2 $B%]!<%H(B
  SK-9844 1000baseSX $B%^%k%A%b!<%I%U%!%$%P(B, 2 $B%]!<%H(B

Texas Instruments ThunderLAN PCI NICs, including the following:
Texas Instruments ThunderLAN PCI NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  Compaq Netelligent 10, 10/100, 10/100 Proliant, 10/100 Dual-Port
  Compaq Netelligent 10/100 TX Embedded UTP, 10 T PCI UTP/Coax, 10/100 TX UTP
  Compaq NetFlex 3P, 3P Integrated, 3P w/ BNC
  Olicom OC-2135/2138, OC-2325, OC-2326 10/100 TX UTP
  Racore 8165 10/100baseTX
  Racore 8148 10baseT/100baseTX/100baseFX multi-personality

ADMtek Inc. AL981-based PCI Fast Ethernet NICs
ADMtek Inc. $B$N(B AL981 $B%Y!<%9(B PCI $B%U%!!<%9%H%$!<%5%M%C%H(B NIC
ADMtek Inc. AN985-based PCI Fast Ethernet NICs
ADMtek Inc. $B$N(B AN985 $B%Y!<%9(B PCI $B%U%!!<%9%H%$!<%5%M%C%H(B NIC
ADMtek Inc. AN986-based USB Ethernet NICs including the following:
ADMtek Inc. $B$N(B AN986 $B%Y!<%9(B USB $B%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  LinkSys USB100TX
  Billionton USB100
  Melco Inc. LUA-TX
  D-Link DSB-650TX
  SMC 2202USB

CATC USB-EL1210A-based USB Ethernet NICs including the following:
CATC $B$N(B USB-EL1210A $B%Y!<%9(B USB $B%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  CATC Netmate
  CATC Netmate II
  Belkin F5U111

Kawasaki LSI KU5KUSB101B-based USB Ethernet NICs including
the following:
Kawasaki LSI $B$N(B KU5KUSB101B $B%Y!<%9(B USB $B%$!<%5%M%C%H(B NIC.
$B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  LinkSys USB10T
  Entrega NET-USB-E45
  Peracom USB Ethernet Adapter
  3Com 3c19250
  ADS Technologies USB-10BT
  ATen UC10T
  Netgear EA101
  D-Link DSB-650
  SMC 2102USB
  SMC 2104USB
  Corega USB-T

ASIX Electronics AX88140A PCI NICs, including the following:
ASIX Electronics AX88140A PCI NIC. $B$3$l$K$O<!$N$b$N$,4^$^$l$^$9(B:
  Alfa Inc. GFC2204
  CNet Pro110B

DEC EtherWORKS III NICs (DE203, DE204, and DE205)
DEC EtherWORKS II NICs (DE200, DE201, DE202, and DE422)
DEC DC21040, DC21041, or DC21140 based NICs (SMC Etherpower 8432T, DE245, etc)

DEC EtherWORKS III NIC (DE203, DE204, DE205)
DEC EtherWORKS II NIC (DE200, DE201, DE202, DE422)
DEC $B$N(B DC21040, DC21041, $B$^$?$O(B DC21140 $B%Y!<%9$N(B NIC
  (SMC Etherpower 8432T, DE245, $B$J$I(B)

Davicom DM9100 and DM9102 PCI Fast Ethernet NICs, including the
following:
Davicom $B$N(B DM9100 $B$H(B DM9102 $B%Y!<%9$N(B PCI $B%U%!!<%9%H%$!<%5%M%C%H(B NIC.
$B$3$l$O<!$N$b$N$,4^$^$l$^$9(B:
  Jaton Corporation XpressNet

Fujitsu MB86960A/MB86965A, including the following:
$BIY;NDL(B MB86960A/MB86965A.
$B$3$l$O<!$N$b$N$,4^$^$l$^$9(B:
  CONTEC C-NET(PC)C Ethernet
  Eiger Labs EPX-10BT
  Fujitsu FMV-J182, FMV-J182A, MBH10302, MBH10303 Ethernet PCMCIA
  Fujitsu Towa LA501 Ethernet
  HITACHI HT-4840-11
  NextCom J Link NC5310
  RATOC REX-5588, REX-9822, REX-4886, REX-R280
  TDK LAK-CD021, LAK-CD021A, LAK-CD021BX

HP PC Lan+ cards (model numbers: 27247B and 27252A).
HP PC Lan+ $B%+!<%I(B ($B%b%G%kHV9f(B: 27247B $B$H(B 27252A).

Intel EtherExpress 16
Intel EtherExpress Pro/10
Intel EtherExpress Pro/100B PCI Fast Ethernet
Intel InBusiness 10/100 PCI Network Adapter
Intel PRO/100+ Management Adapter

Isolan AT 4141-0 (16 bit)
Isolink 4110     (8 bit)

Novell NE1000, NE2000, and NE2100 Ethernet interface.
Novell NE1000, NE2000, NE2100 $B%$!<%5%M%C%H%$%s%?%U%'!<%9(B.

PCI network cards emulating the NE2000: RealTek 8029, NetVin 5000,
Winbond W89C940, Surecom NE-34, VIA VT86C926.

NE2000 $B$r%(%_%e%l!<%H$9$k(B PCI $B%M%C%H%o!<%/%+!<%I(B:
RealTek 8029, NetVin 5000, Winbond W89C940, Surecom NE-34, VIA VT86C926.

3Com 3C501 cards
3Com 3C501 $B%+!<%I(B

3Com 3C503 Etherlink II

3Com 3c505 Etherlink/+

3Com 3C507 Etherlink 16/TP

3Com 3C509, 3C529 (MCA), 3C579,
3C589/589B/589C/589D/589E/XE589ET/574TX/574B (PC-card/PCMCIA),
3C590/592/595/900/905/905B/905C PCI,
3C556/556B MiniPCI,
and EISA (Fast) Etherlink III / (Fast) Etherlink XL
$B$=$7$F(B EISA (Fast) Etherlink III / (Fast) Etherlink XL

3Com 3c980/3c980B Fast Etherlink XL server adapter

3Com 3cSOHO100-TX OfficeConnect adapter

Crystal Semiconductor CS89x0-based NICs, including:
Crystal Semiconductor $B$N(B CS89x0 $B%Y!<%9$N(B NIC.
$B$3$l$O<!$N$b$N$,4^$^$l$^$9(B:
  IBM Etherjet ISA

NE2000 compatible PC-Card (PCMCIA) Ethernet/FastEthernet cards,
including the following:
NE2000 $B8_49$N(B PC-Card (PCMCIA) $B%$!<%5%M%C%H(B/$B%U%!!<%9%H%$!<%5%M%C%H%+!<%I(B.
$B$3$l$O<!$N$b$N$,4^$^$l$^$9(B:
  AR-P500 Ethernet card
  Accton EN2212/EN2216/UE2216(OEM)
  Allied Telesis CentreCOM LA100-PCM_V2
  AmbiCom 10BaseT card
  BayNetworks NETGEAR FA410TXC Fast Ethernet
  CNet BC40 adapter
  COREGA Ether PCC-T/EtherII PCC-T/FEther PCC-TXF/PCC-TXD
  Compex Net-A adapter
  CyQ've ELA-010
  D-Link DE-650/660
  Danpex EN-6200P2
  ELECOM Laneed LD-CDL/TX
  IO DATA PCLATE
  IBM Creditcard Ethernet I/II
  IC-CARD Ethernet/IC-CARD+ Ethernet
  Linksys EC2T/PCMPC100,EtherFast 10/100 PC Card (PCMPC100,V2,V3)
  Melco LPC-T/LPC2-T/LPC2-TX/LPC3-TX/LPC3-CLX
  NDC Ethernet Instant-Link
  National Semiconductor InfoMover NE4100
  Network Everywhere Ethernet 10BaseT PC Card
  Planex FNW-3600-T
  Socket LP-E
  Surecom EtherPerfect EP-427
  TDK LAK-CD031,Grey Cell GCS2000 Ethernet Card
  Telecom Device SuperSocket RE450T

Megahertz X-Jack Ethernet PC-Card CC-10BT

Xircom CreditCard adapters(16bit) and workalikes
Xircom CreditCard adapters(16bit) $B$H$=$NF1EyIJ(B
    Accton EN2226/Fast EtherCard (16-bit verison)
    Accton EN2226/Fast EtherCard (16-bit $BHG(B)
    Compaq Netelligent 10/100 PC Card
    Intel EtherExpress PRO/100 Mobile Adapter (16-bit verison)
    Intel EtherExpress PRO/100 Mobile Adapter (16-bit $BHG(B)
    Xircom 10/100 Network PC Card adapter
    Xircom Realport card + modem(Ethernet part)
    Xircom Realport card + modem($B%$!<%5%M%C%HIt(B)
    Xircom CreditCard Ethernet 10/100
    Xircom CreditCard 10Base-T "CreditCard Ethernet Adaptor IIps" (PS-CE2-10)
    Xircom CreditCard Ethernet 10/100 + modem (Ethernet part)
    Xircom CreditCard Ethernet 10/100 + modem ($B%$!<%5%M%C%HIt(B)

National Semiconductor DP8393X (SONIC) Ethernet cards
    NEC PC-9801-83, -84, -103, and -104
    NEC PC-9801N-25 and -J02R

National Semiconductor $B$N(B DP8393X (SONIC) $B%Y!<%9%$!<%5%M%C%H%+!<%I(B
    NEC PC-9801-83, -84, -103, -104
    NEC PC-9801N-25 $B$H(B -J02R


2.3. FDDI
---------

DEC FDDI (DEFPA/DEFEA) NICs
DEC FDDI (DEFPA/DEFEA) NIC


2.4. ATM
--------

   o ATM Host Interfaces
        - FORE Systems, Inc. PCA-200E ATM PCI Adapters
        - Efficient Networks, Inc. ENI-155p ATM PCI Adapters

   o ATM $B%[%9%H%$%s%?!<%U%'!<%9(B
        - FORE Systems, Inc. PCA-200E ATM PCI $B%"%@%W%?(B
        - Efficient Networks, Inc. ENI-155p ATM PCI $B%"%@%W%?(B

   o ATM Signaling Protocols
        - The ATM Forum UNI 3.1 signaling protocol
        - The ATM Forum UNI 3.0 signaling protocol
        - The ATM Forum ILMI address registration
        - FORE Systems' proprietary SPANS signaling protocol
        - Permanent Virtual Channels (PVCs)

   o ATM $B%7%0%J%j%s%0%W%m%H%3%k(B
        - The ATM Forum UNI 3.1 $B%7%0%J%j%s%0%W%m%H%3%k(B
        - The ATM Forum UNI 3.0 $B%7%0%J%j%s%0%W%m%H%3%k(B
        - The ATM Forum ILMI $B%"%I%l%9EPO?(B
        - FORE Systems $BFH<+$N(B SPANS $B%7%0%J%j%s%0%W%m%H%3%k(B
        - Permanent Virtual Channels (PVCs)

   o IETF "Classical IP and ARP over ATM" model
   o IETF $B$N(B "Classical IP and ARP over ATM" $B%b%G%k(B
        - RFC 1483, "Multiprotocol Encapsulation over ATM Adaptation Layer 5"
        - RFC 1577, "Classical IP and ARP over ATM"
        - RFC 1626, "Default IP MTU for use over ATM AAL5"
        - RFC 1755, "ATM Signaling Support for IP over ATM"
        - RFC 2225, "Classical IP and ARP over ATM"
        - RFC 2334, "Server Cache Synchronization Protocol (SCSP)"
        - Internet Draft draft-ietf-ion-scsp-atmarp-00.txt,
                "A Distributed ATMARP Service Using SCSP"

   o ATM Sockets interface
   o ATM $B%=%1%C%H%$%s%?!<%U%'%$%9(B


2.5. Misc
2.5. $B$=$NB>$N%G%P%$%9(B
---------

AST 4 port serial card using shared IRQ.
AST 4 $B%]!<%H%7%j%"%k%+!<%I(B ($B6&M-(B IRQ $B;HMQ(B)

ARNET 8 port serial card using shared IRQ.
ARNET (now Digiboard) Sync 570/i high-speed serial.
ARNET 8 $B%]!<%H(B $B%7%j%"%k%+!<%I(B ($B6&M-(B IRQ $B;HMQ(B) 
ARNET ($B8=:_$O(B Digiboard) $BF14|(B 570/i $B9bB.%7%j%"%k(B

Boca BB1004 4-Port serial card (Modems NOT supported)
Boca IOAT66 6-Port serial card (Modems supported)
Boca BB1008 8-Port serial card (Modems NOT supported)
Boca BB2016 16-Port serial card (Modems supported)

Boca BB1004 4 $B%]!<%H%7%j%"%k%+!<%I(B  (Modem $B$O%5%]!<%H$7$F!V$$$^$;$s!W(B)
Boca IOAT66 6 $B%]!<%H%7%j%"%k%+!<%I(B  (Modem $B$O%5%]!<%H$7$F$$$^$9(B)
Boca BB1008 8 $B%]!<%H%7%j%"%k%+!<%I(B  (Modem $B$O%5%]!<%H$7$F!V$$$^$;$s!W(B)
Boca BB2016 16 $B%]!<%H%7%j%"%k%+!<%I(B (Modem $B$O%5%]!<%H$7$F$$$^$9(B)

Comtrol Rocketport card.
Comtrol Rocketport $B%+!<%I(B

Cyclades Cyclom-y Serial Board.
Cyclades Cyclom-y $B%7%j%"%k%\!<%I(B

STB 4 port card using shared IRQ.
STB 4 $B%]!<%H%+!<%I(B ($B6&M-(B IRQ $B;HMQ(B) 

SDL Communications Riscom/8 Serial Board.
SDL Communications RISCom/N2 and N2pci high-speed sync serial boards.
SDL Communications Riscom/8 $B%7%j%"%k%\!<%I(B
SDL Communications RISCom/N2 $B$*$h$S(B N2pci $B9bB.F14|%7%j%"%k%\!<%I(B

Stallion multiport serial boards: EasyIO, EasyConnection 8/32 & 8/64,
ONboard 4/16 and Brumby.
Stallion $B%^%k%A%]!<%H%7%j%"%k%\!<%I(B: EasyIO, EasyConnection 8/32 $B$H(B 8/64,
Onboard 4/16, Brumby.

Specialix SI/XIO/SX ISA, EISA and PCI serial expansion cards/modules.
Specialix SI/XIO/SX ISA, EISA $B$*$h$S(B PCI $B%7%j%"%k3HD%%+!<%I(B/$B%b%8%e!<%k(B

Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis UltraSound
and Roland MPU-401 sound cards. (snd driver)
Adlib, SoundBlaster, SoundBlaster Pro, ProAudioSpectrum, Gravis
UltraSound, Roland MPU-401 $B%5%&%s%I%+!<%I(B (snd $B%I%i%$%P(B)

Advance Asound 100, 110 and Logic ALS120
Advance Asound 100, 110 $B$*$h$S(B Logic ALS120
Crystal Semiconductor CS461x/462x/428x
ENSONIQ AudioPCI ES1370/1371
ESS ES1868, ES1869, ES1879 and ES1888
ESS ES1868, ES1869, ES1879 $B$*$h$S(B ES1888
ESS Maestro-1, Maestro-2, and Maestro-2E
ESS Maestro-1, Maestro-2, $B$*$h$S(B Maestro-2E
ForteMedia fm801
Gravis UltraSound MAX/PnP
MSS/WSS Compatible DSPs
MSS/WSS $B8_49(B DSP
NeoMagic 256AV/ZX
OPTi 931/82C931
SoundBlaster, Soundblaster Pro, Soundblaster AWE-32, Soundblaster AWE-64
Trident 4DWave DX/NX
VIA Technologies VT82C686A
Yamaha DS1 and DS1e
Yamaha DS1 $B$*$h$S(B DS1e
(newpcm driver)
(newpcm $B%I%i%$%P(B)

Connectix QuickCam
Matrox Meteor Video frame grabber
Matrox Meteor $B%S%G%*%U%l!<%`%0%i%P(B
Creative Labs Video Spigot frame grabber
Creative Labs Video Spigot $B%U%l!<%`%0%i%P(B
Cortex1 frame grabber
Cortex1 $B%U%l!<%`%0%i%P(B
Hauppauge Wincast/TV boards (PCI)
Hauppauge Wincast/TV $B%\!<%I(B (PCI)
STB TV PCI
Intel Smart Video Recorder III
Various Frame grabbers based on Brooktree Bt848 / Bt878 chip.
Brooktree Bt848 $B$*$h$S(B Bt878 $B%A%C%W%Y!<%9$N%U%l!<%`%0%i%P3F<o(B

HP4020, HP6020, Philips CDD2000/CDD2660 and Plasmon CD-R drives.
HP4020, HP6020, Philips CDD2000/CDD2660, Plasmon CD-R $B%I%i%$%V(B

PS/2 mice
PS/2 $B%^%&%9(B

Standard PC Joystick
$BI8=`(B PC $B%8%g%$%9%F%#%C%/(B

X-10 power controllers
X-10 power $B%3%s%H%m!<%i(B

GPIB and Transputer drivers.
GPIB $B$*$h$S(B Transputer $B%I%i%$%P(B

Genius and Mustek hand scanners.
Genius $B$*$h$S(B Mustek $B%O%s%I%9%-%c%J(B

Xilinx XC6200 based reconfigurable hardware cards compatible with
the HOT1 from Virtual Computers (www.vcc.com)
Virtual Computers(www.vcc.com) $B$N(B HOT1 $B$H8_49@-$N$"$k(B
XILINX XC6200 $B%Y!<%9$N:F9=@.2DG=%O!<%I%&%'%"%+!<%I(B

Support for Dave Mills experimental Loran-C receiver.
Dave Mills $B;a$K$h$k<B83E*$J(B Loran-C $B<u?.5!$N%5%]!<%H(B

Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA and ISA standard speed
(2Mbps) and turbo speed (6Mbps) wireless network adapters and workalikes
Lucent Technologies WaveLAN/IEEE 802.11 PCMCIA $B$*$h$S(B ISA $B$NI8=`%9%T!<(B
$B%I(B (2Mbps), turbo $B%9%T!<%I(B (6Mbps) $BL5@~%M%C%H%o!<%/%"%@%W%?$H$=$NF1EyIJ(B
NCR WaveLAN/IEEE 802.11
Cabletron RoamAbout 802.11 DS
Compaq WL100
Corega KK Wireless LAN PCC-11
Laneed Wireless card
ELECOM Air@Hawk/LD-WL11/PCC
Farallon Skyline 11Mbps Wireless
ICOM SL-1100
Melco Airconnect WLI-PCM-L11
NEC Wireless Card CMZ-RT-WP
PLANEX GeoWave/GW-NS110
TDK LAK-CD011WL
Note: the ISA versions of these adapters are actually PCMCIA cards
combined with an ISA to PCMCIA bridge card, so both kinds of devices
work with the same driver.

$BCm0UE@(B: ISA $B%P!<%8%g%s$N$3$l$i$N%"%@%W%?$O(B, $B<B:]$K$O(B ISA to PCMCIA $B%V(B
$B%j%C%8%+!<%I$K(B PCMCIA $B%+!<%I$r@\B3$7$?$b$N$G$9(B. $B$=$N$?$a$I$A$i$N%P!<%8%g(B
$B%s$N%G%P%$%9$bF1$8%I%i%$%P$GF0:n$7$^$9(B.

Aironet 4500/4800 series 802.11 wireless adapters. The PCMCIA,
PCI and ISA adapters are all supported.
Aironet 4500/4800 $B%7%j!<%:(B 802.11 $BL5@~%"%@%W%?(B. PCMCIA, PCI, ISA $B%"%@%W%?(B
$B$N$9$Y$F$,%5%]!<%H$5$l$F$$$^$9(B.
Cisco Systems Aironet 340 Series (includes 340, 341, and 342 models)
Cisco Systems Aironet 340 $B%7%j!<%:(B (340, 341, $B$*$h$S(B 342 $B%b%G%k$r4^$`(B)
11Mbps 802.11 wireless NIC
11Mbps 802.11 $BL5@~(B NIC

Webgear Aviator 2.4GHz wireless adapters.
Webgear Aviator 2.4GHz $BL5@~%"%@%W%?(B.

Toshiba Mobile HDD MEHDD20A (Type II)
$BEl<G(B Mobile HDD MEHDD20A (Type II)

3. Obtaining FreeBSD
3. FreeBSD $B$NF~<j(B
--------------------

You may obtain FreeBSD in a variety of ways:
FreeBSD $B$rF~<j$9$kJ}K!$O$$$m$$$m$"$j$^$9(B.


3.1. FTP/Mail
-------------

You can ftp FreeBSD and any or all of its optional packages from
`ftp.freebsd.org' - the official FreeBSD release site.

FreeBSD $B$*$h$SIU?o$9$k$9$Y$F$N%Q%C%1!<%8$O(B, FreeBSD $B$N(B
$B8x<0%j%j!<%9%5%$%H$G$"$k(B `ftp.FreeBSD.org' $B$+$i(B ftp $B$GF~<j$G$-$^$9(B.

For other locations that mirror the FreeBSD software see the file
MIRROR.SITES.  Please ftp the distribution from the site closest (in
networking terms) to you.  Additional mirror sites are always welcome!
Contact freebsd-admin@FreeBSD.org for more details if you'd like to
become an official mirror site.

$BB>$N(B FreeBSD $B%=%U%H%&%'%"$r%_%i!<$7$F$$$k$H$3$m$O(B MIRROR.SITES $B$K(B
$B5-:\$5$l$F$$$^$9(B. $BG[I[%;%C%H$r<hF@$9$k$H$-$K$O(B ($B%M%C%H%o!<%/E*$K(B)
$B0lHV6a$$$H$3$m$+$i(B ftp $B$7$F$/$@$5$$(B. $B$J$*%_%i!<%5%$%H$K$J$j$?$$$H(B
$B$$$&$H$3$m$O4?7^$7$^$9(B. $B@5<0$J%_%i!<%5%$%H$K$J$j$?$$>l9g$K$O(B,
freebsd-admin@FreeBSD.org $B$^$G>\:Y$rLd$$9g$o$;$F$/$@$5$$(B. 

If you do not have access to the Internet and electronic mail is your
only recourse, then you may still fetch the files by sending mail to
`ftpmail@ftpmail.vix.com' - putting the keyword "help" in your message
to get more information on how to fetch files using this mechanism.
Please do note, however, that this will end up sending many *tens of
megabytes* through the mail and should only be employed as an absolute
LAST resort!

$B$b$7%$%s%?%M%C%H$X$N%"%/%;%9<jCJ$,$J$/$F(B, $BEE;R%a!<%k$7$+;H$($J$$$H$7$F(B
$B$b(B, `ftpmail@ftpmail.vix.com' $B$X%a!<%k$rAw$k$3$H$G%U%!%$%k$r<hF@$9$k$3(B
$B$H$,$G$-$^$9(B - $B$3$N;EAH$_$r;H$C$F%U%!%$%k$r<hF@$9$kJ}K!$K$D$$$F$N>\:Y(B
$B$O(B, $B%a!<%kK\BN$K(B "help" $B$H$$$&%-!<%o!<%I$r=q$$$F$/$@$5$$(B. $B$?$@$7(B, $B6/$/(B
$BCm0U$9$Y$-$3$H$H$7$F(B, $B$3$N<jCJ$N7k2L$H$7$F(B $B!v?t==%a%,%P%$%H!v(B $B$b$N%U%!(B
$B%$%k$,%a!<%k$GAw$i$l$F$/$k$3$H$K$J$j$^$9$+$i(B, $B$3$NJ}K!$OK\Ev$N:G8e$N<j(B
$BCJ$H9M$($F$/$@$5$$(B.

3.2. CDROM
----------

FreeBSD 4.x-RELEASE and 3.x-RELEASE CDs may be ordered on CDROM from:
FreeBSD 4.x-RELEASE $B$H(B 3.x-RELEASE $B$N(B CDROM $B$O(B, $B<!$N$H$3$m$KCmJ8$9$k$3(B
$B$H$b2DG=$G$9(B.

        BSDi / Walnut Creek CDROM
        4041 Pike Lane, Suite D
        Concord CA  94520
        USA
        +1-800-786-9907, +1-925-674-0783, +1-925-674-0821 (FAX)

Or via the Internet from orders@cdrom.com or http://www.cdrom.com.
Their current catalog can be obtained via ftp from:

$B%$%s%?!<%M%C%H$+$i$O(B orders@cdrom.com $B$^$?$O(B http://www.cdrom.com $B$G(B
$BCmJ8$G$-$^$9(B. $B8=:_$N%+%?%m%0$O0J2<$N>l=j$+$i(B FTP $B$G<hF@$G$-$^$9(B:

        ftp://ftp.cdrom.com/cdrom/catalog

Cost per -RELEASE CD is $39.95 or $24.95 with a FreeBSD subscription.
FreeBSD SNAPshot CDs, when available, are $39.95 or $14.95 with a
FreeBSD-SNAP subscription (-RELEASE and -SNAP subscriptions are entirely
separate).  With a subscription, you will automatically receive updates as
they are released.  Your credit card will be billed when each disk is
shipped and you may cancel your subscription at any time without further
obligation.

-RELEASE CD $B$NCMCJ$O(B 39.95 $B%I%k(B, FreeBSD $B$NDj4|9XFI@)$N>l9g$K$O(B24.95 
$B%I%k$G$9(B. FreeBSD SNAPshot CD $B$O(B, $B<j$KF~$k;~4|$K$O(B 39.95 $B%I%k(B,
FreeBSD-SNAP $B$NDj4|9XFI$O(B 14.95 $B%I%k$G$9(B (-RELEASE $B$H(B -SNAP $B$NDj4|9XFI(B
$B$O40A4$KJL!9$G$9(B). $BDj4|9XFI@)$G$O(B, $B?7$7$$%P!<%8%g%s$,%j%j!<%9$5$l$k$4(B
$B$H$K<+F0E*$KAw$i$l$F$-$^$9(B. $BNA6b$O%G%#%9%/$,G[Aw$5$l$k$?$S$K%/%l%8%C%H(B
$B%+!<%I$+$i0z$-Mn$H$5$l$^$9(B. $B%-%c%s%;%k$K$D$$$F$bFC$K@)Ls$O$J$/(B, $B$$$D$G(B
$B$b2rLs$G$-$^$9(B.

Shipping (per order not per disc) is $5 in the US, Canada or Mexico
and $9.00 overseas.  They accept Visa, Mastercard, Discover, American
Express or checks in U.S. Dollars and ship COD within the United
States.  California residents please add 8.25% sales tax.

$BG[AwNA$O(B ($BCmJ8Kh$G%G%#%9%/Kh$G$O$"$j$^$;$s(B) $B$O%"%a%j%+9g=09q9qFb(B, $B%+%J(B
$B%@(B, $B%a%-%7%3$G(B 5 $B%I%k(B, $B$=$l0J30$G$O(B 9 $B%I%k$G$9(B. Visa, Mastercard,
Discover, American Express $B$^$?$O(BU.S.$B%I%k>.@Z<j$,MxMQ$G$-$^$9(B.  $B9g=09q(B
$B9qFb$G$O>&IJ$r8=6b$H0z49$G$*EO$7$9$k;v$b$G$-$^$9(B. $B%+%j%U%)%k%K%":_=;$N(B
$BJ}$O(B, 8.25% $B$N>CHq@G$,2C$o$j$^$9(B.

Should you be dissatisfied for any reason, the CD comes with an
unconditional return policy.

$B$b$75$$KF~$i$J$1$l$P(B, CD $B$rL5>r7o$KJV5Q$7JV6b$5$;$k$3$H$,$G$-$^$9(B. 


4. Upgrading from previous releases of FreeBSD
4. FreeBSD $B$N0JA0$N%j%j!<%9$+$i%"%C%W%0%l!<%I$9$k$K$O(B
----------------------------------------------

If you're upgrading from a previous release of FreeBSD, most likely
it's 3.0 and there may be some issues affecting you, depending
of course on your chosen method of upgrading.  There are two popular
ways of upgrading FreeBSD distributions:

$B0JA0$N%j%j!<%9$+$i(B, $BFC$K(B 3.0 $B$+$i(B, FreeBSD $B$r%"%C%W%0%l!<%I$7$h$&$H9M(B
$B$($F$$$k$J$i(B, $B$b$A$m$s%"%C%W%0%l!<%I$NJ}K!$K$b$h$k$N$G$9$,(B, $B$$$/$D$+Ld(B
$BBj$,5/$-$k$+$b$7$l$^$;$s(B.  FreeBSD $BA4BN$r%"%C%W%0%l!<%I$9$k$K$O0J2<$N(B
$BFs$D$N<j=g$,$h$/;H$o$l$^$9(B.

        o Using sources, via /usr/src
        o Using sysinstall's (binary) upgrade option.

        o /usr/src $B0J2<$N%=!<%9$r;H$&(B
        o sysinstall $B$N(B ($B%P%$%J%j(B) $B%"%C%W%0%l!<%I%*%W%7%g%s$r;H$&(B

Please read the UPGRADE.TXT file for more information, preferably
before beginning an upgrade.

$B%"%C%W%0%l!<%I$r<B9T$9$kA0$K(B, UPGRADE.TXT $B$rFI$s$G<j=g$N>\:Y$r3NG'$7$F(B
$B$/$@$5$$(B.

5. Reporting problems, making suggestions, submitting code.
5. $B>c32Js9p(B, $BDs0F$N;EJ}(B, $B%3!<%I$NDs6!$K$D$$$F(B
-----------------------------------------------------------
Your suggestions, bug reports and contributions of code are always
valued - please do not hesitate to report any problems you may find
(preferably with a fix attached, if you can!).

$BDs0F(B, $B%P%0%l%]!<%H(B, $B%3!<%I$NDs6!$O$$$D$G$b4?7^$7$^$9(B - $B2?$+LdBj$r8+$D(B
$B$1$?$i(B, $B$?$a$i$o$:$KJs9p$7$F$/$@$5$$(B ($B$b$72DG=$J$i(B, $B=$@5J}K!$b$D$1$F$b(B
$B$i$($k$HHs>o$K=u$+$j$^$9(B!).

The preferred method to submit bug reports from a machine with
Internet mail connectivity is to use the send-pr command or use the CGI
script at http://www.freebsd.org/send-pr.html.  Bug reports
will be dutifully filed by our faithful bugfiler program and you can
be sure that we'll do our best to respond to all reported bugs as soon
as possible.  Bugs filed in this way are also visible on our WEB site
in the support section and are therefore valuable both as bug reports
and as "signposts" for other users concerning potential problems to
watch out for.

$B%P%0Js9p$r$7$F$$$?$@$1$k>l9g$O(B, $B%$%s%?!<%M%C%H$N%a!<%k$,;H$($k4D6-$+$i(B
$B$O(Bsend-pr $B%3%^%s%I$,(B, $B$^$?$O(B http://www.FreeBSD.org/send-pr.html $B$K$"(B
$B$k(B CGI $B$r;H$&$3$H$,9%$^$7$$$G$9(B. $B%P%0Js9p$O%P%05-O?%W%m%0%i%`$K$h$C$F(B
$BCi<B$K@0M}$5$l$k$N$G(B, $BJs9p$5$l$?%P%0$K$D$$$F$G$-$k$+$.$jAa$/BP1~$9$k$3(B
$B$H$r4|BT$7$F$$$?$@$$$F7k9=$G$9(B. $B$3$N$h$&$K$7$F5-O?$5$l$?%P%0$NFbMF$K$D(B
$B$$$F$O(B, $B$o$?$7$?$A$N%&%'%V%5%$%H$N%5%]!<%H%;%/%7%g%s$G8+$k$3$H$,$G$-$^(B
$B$9$N$G(B, $B%P%0Js9p$H$7$F$@$1$G$J$/(B, $BB>$N%f!<%6$,LdBj$rG'<1$9$k!V;XI8!W$H(B
$B$7$F$b=EMW$J0UL#$r;}$A$^$9(B.

If, for some reason, you are unable to use the send-pr command to
submit a bug report, you can try to send it to:

$B2?$i$+$NM}M3$G%P%0%l%]!<%H$rDs=P$9$k$N$K(B send-pr $B%3%^%s%I$,;H$($J$$>l(B
$B9g$K$O(B, $B<!$N%"%I%l%9$X%a!<%k$GAw$C$F$_$F$/$@$5$$(B.

                freebsd-bugs@FreeBSD.org

Note that send-pr itself is a shell script that should be easy to move
even onto a totally different system.  We much prefer if you could use
this interface, since it make it easier to keep track of the problem
reports.  However, before submitting, please try to make sure whether
the problem might have already been fixed since.

send-pr $B$=$N$b$N$O%7%'%k%9%/%j%W%H$J$N$G(B, $B$^$C$?$/0[$J$k%7%9%F%`>e$G$b(B
$B4JC1$KF0:n$5$;$k$3$H$,$G$-$k$H;W$$$^$9(B.  $B>c32Js9p$NDI@W$,$h$j4JC1$K$J(B
$B$k$N$G(B, $B$G$-$l$P$3$N%$%s%?%U%'!<%9$r;H$C$F$/$@$5$$(B.  $B$?$@$7(B, $BJs9p$rDs(B
$B=P$9$kA0$K>c32$,$9$G$K=$@5$5$l$F$$$k$+$I$&$+$r$-$A$s$H3NG'$7$F$/$@$5$$(B.

Otherwise, for any questions or tech support issues, please send mail to:

$B$=$NB>(B, $B<ALd$d%F%/%K%+%k%5%]!<%HEy$NLdBj$K$D$$$F$O(B, $B<!$N%"%I%l%9$X(B ($B1Q(B
$B8l$G(B) $B%a!<%k$7$F$/$@$5$$(B.

                freebsd-questions@FreeBSD.org


If you're tracking the -stable development efforts, you should
definitely join the -stable mailing list, in order to keep abreast
of recent developments and changes that may affect the way you
use and maintain the system:

$B$b$7(B, $B$"$J$?$,(B -stable $B$G3+H/$5$l$k:G?7$NG[I[J*$r0];}$9$k$D$b$j$G$$$k(B
$B$J$i(B, $B:G?7$N3+H/$HJQ99>u67$rGD0.$9$k$?$a$K(B -stable $B%a!<%j%s%0%j%9%H$K(B
$B;22C$9$k$Y$-$G$9(B.  $B$3$l$i$N>pJs$O(B, $B$"$J$?$N%7%9%F%`$NMxMQ$HJ]<i$NJ}K!(B
$B$K1F6A$9$k$G$7$g$&(B.

		freebsd-stable@FreeBSD.org


Additionally, being a volunteer effort, we are always happy to have
extra hands willing to help - there are already far more desired
enhancements than we'll ever be able to manage by ourselves!  To
contact us on technical matters, or with offers of help, please send
mail to:

$B$^$?(B, $B$o$?$7$?$A$O%\%i%s%F%#%"%Y!<%9$G3hF0$7$F$$$^$9$N$G(B, $B?7$7$$<j=u$1(B
$B$r$$$D$G$b4?7^$7$^$9(B.  $B$o$?$7$?$A$@$1$G$O(B, $B$b$&$H$F$b$3$J$7$-$l$J$$$[(B
$B$I(B, $B$d$j$?$$$3$H$,;3@Q$_$K$J$C$F$$$k$N$G$9(B! $B5;=QE*$JLL$G$o$?$7$?$A$KO"(B
$BMm$9$k>l9g(B, $B$"$k$$$O1g=u$N?=$7=P$O<!$N%"%I%l%9$X%a!<%k$7$F$/$@$5$$(B.

                freebsd-hackers@FreeBSD.org


Please note that these mailing lists can experience *significant*
amounts of traffic and if you have slow or expensive mail access and
are only interested in keeping up with significant FreeBSD events, you
may find it preferable to subscribe instead to:

$B$3$l$i$N%a!<%j%s%0%j%9%H$O!V$+$J$jB?$/$N!W%H%i%U%#%C%/$,$"$j$^$9$N$G(B, 
$B%a!<%k%"%/%;%9$,CY$$$H$+(B, $B%"%/%;%9$,9b$/$D$/>l9g$G(B, $B$7$+$b(B FreeBSD $B$K(B
$B4X$9$k=EMW$J%$%Y%s%H$N>pJs$@$1$"$l$P$h$$$H$$$&>l9g$O(B, $B<!$N%a!<%j%s%0(B
$B%j%9%H$K?=$79~$`$N$,$h$$$G$7$g$&(B. 

                freebsd-announce@FreeBSD.org


All of the mailing lists can be freely joined by anyone wishing
to do so.  Send mail to MajorDomo@FreeBSD.org and include the keyword
`help' on a line by itself somewhere in the body of the message.  This
will give you more information on joining the various lists, accessing
archives, etc.  There are a number of mailing lists targeted at
special interest groups not mentioned here, so send mail to majordomo
and ask about them!

$B$9$Y$F$N%a!<%j%s%0%j%9%H$O4uK>$,$"$l$PC/$G$b<+M3$K;22C$G$-$^$9(B.
MajorDomo@FreeBSD.org $B$XK\J8$K(B help $B$H$@$1=q$$$?9T$r4^$`%a%C%;!<%8$rAw$C(B
$B$F$/$@$5$$(B. $B$3$l$G(B, $B$$$m$s$J%a!<%j%s%0%j%9%H$K;22C$9$kJ}K!$d(B, $B%"!<%+%$(B
$B%V$K%"%/%;%9$9$kJ}K!$J$I$N>\$7$$>pJs$,F~<j$G$-$^$9(B. $B$3$3$G$O?($l$F$$$^(B
$B$;$s$,(B, $BB>$K$bFCDj$NOCBj$N$?$a$N$$$m$$$m$J%a!<%j%s%0%j%9%H$,$"$j$^$9$N(B
$B$G(B, majordomo $B$K%a!<%k$rAw$C$FLd$$9g$o$;$F$_$F$/$@$5$$(B!

6. Acknowledgments
6. $B<U<-(B
------------------

FreeBSD represents the cumulative work of many hundreds, if not
thousands, of individuals from around the world who have worked very
hard to bring you this release.  For a complete list of FreeBSD
project staffers, please see:

FreeBSD $B$O@$3&Cf$N(B ($B?t@i$O8@$$2a$.$+$b$7$l$^$;$s$,(B) $B$?$/$5$s$N?M!9$,0l(B
$B@87|L?9T$C$?:n6H$N;rJ*$G$"$j(B, $B$=$N7k2L$H$7$F$3$N%j%j!<%9$,$"$J$?$N<j85(B
$B$KFO$$$F$$$^$9(B. FreeBSD$B%W%m%8%'%/%H$N%9%?%C%U$N40A4$J%j%9%H$K$D$$$F$O(B, 
$B0J2<$r$4Mw$/$@$5$$(B:

        http://www.freebsd.org/handbook/staff.html

or, if you've loaded the doc distribution:
doc $BG[I[%U%!%$%k$r%$%s%9%H!<%k$7$F$"$l$P0J2<$G$b;2>H$G$-$^$9(B:

        file:/usr/share/doc/handbook/staff.html


Special mention to:
$B0J2<$NJ}!9$KFC$K46<U$7$^$9(B:

        The donors listed at http://www.freebsd.org/handbook/donors.html

        $B4sB#<T$NJ}!9(B: http://www.FreeBSD.org/handbook/donors.html $B$K(B
        $B%j%9%H$,$"$j$^$9(B.

        Justin M. Seger <jseger@freebsd.org> for almost single-handedly
        converting the ports collection to ELF.

        $B$[$H$s$I0l?M$G(B ports $B%3%l%/%7%g%s$r(B ELF $BBP1~$KJQ99$7$?(B
        Justin M. Seger <jseger@freebsd.org>.

        Doug Rabson <dfr@freebsd.org> and John Birrell <jb@freebsd.org>
        for making FreeBSD/alpha happen and to the NetBSD project for
        substantial indirect aid.

        FreeBSD/alpha $B$N3+H/$r;O$a$?(B Doug Rabson <dfr@freebsd.org> $B$H(B
        John Birrell <jb@freebsd.org>. $B$^$?(B, $B4V@\E*$G$O$"$j$^$9$,B?$/(B
        $B$N1g=u$r$7$F$/$l$?(B the NetBSD project.

        Peter Wemm <peter@freebsd.org> for the new kernel module system
        (with substantial aid from Doug Rabson).

        $B?7$7$$%+!<%M%k%b%8%e!<%k%7%9%F%`$K$D$$$F(B Peter Wemm
        <peter@freebsd.org> ($BB?$/$N1g=u$r$7$F$/$l$?(B Doug Rabson $B$H6&$K(B).

        And to the many thousands of FreeBSD users and testers all over the
        world, without whom this release simply would not have been possible.

        $B$^$?(B, $BA4@$3&$N?t@i$N(B FreeBSD $B%f!<%6$H%F%9%?$N3'$5$s(B. $B3'$5$s$,(B
        $B$$$J$1$l$P(B, $B:#2s$N%j%j!<%9$O$^$C$?$/IT2DG=$@$C$?$G$7$g$&(B.

We sincerely hope you enjoy this release of FreeBSD!

$B:#2s$N(B FreeBSD $B$N%j%j!<%9$r3Z$7$s$G$$$?$@$1$k$3$H$r?4$+$i5'$C$F(B. 

                        The FreeBSD Project

$FreeBSD: src/release/texts/i386/RELNOTES.TXT,v 1.72.2.114 2001/03/17 01:21:00 jkh Exp $
