From owner-FreeBSD-net-jp@jp.freebsd.org  Mon Jun 26 10:31:07 2000
Received: (from daemon@localhost)
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) id KAA56830;
	Mon, 26 Jun 2000 10:31:07 +0900 (JST)
	(envelope-from owner-FreeBSD-net-jp@jp.FreeBSD.org)
Received: from ns1.isf.co.jp (ns1.isf.co.jp [210.163.25.2])
	by castle.jp.freebsd.org (8.9.3+3.2W/8.7.3) with ESMTP id KAA56825
	for <FreeBSD-net-jp@jp.freebsd.org>; Mon, 26 Jun 2000 10:31:06 +0900 (JST)
	(envelope-from msuzuki@isf.co.jp)
Received: from lp042 (gw1.isf.co.jp [210.163.25.4])
	by ns1.isf.co.jp (8.9.3+3.2W/3.7W/ISF1.00) with SMTP id KAA39851
	for <FreeBSD-net-jp@jp.freebsd.org>; Mon, 26 Jun 2000 10:30:36 +0900 (JST)
Message-Id: <200006260130.KAA39851@ns1.isf.co.jp>
X-Sender: msuzuki@mx1.isf.co.jp
X-Mailer: QUALCOMM Windows Eudora Pro Version 3.0.3-J (32)
Date: Mon, 26 Jun 2000 10:32:56 +0900
To: FreeBSD-net-jp@jp.freebsd.org
From: MasaruSuzuki <msuzuki@isf.co.jp>
In-Reply-To: <200006232011.FAA09346@Pismo.QIX.ORG>
References: <Your message of "22 Mar 2000 22:48:22 +0900"<877levyv2x.fsf@saorin.noe.mcu.or.jp>
 <877levyv2x.fsf@saorin.noe.mcu.or.jp>
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-2022-JP"
Reply-To: FreeBSD-net-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+000315
X-Sequence: FreeBSD-net-jp 2653
Subject: [FreeBSD-net-jp 2653] ppp =?ISO-2022-JP?B?GyRCMnI3aCQ7JDobKEo=?=
Errors-To: owner-FreeBSD-net-jp@jp.freebsd.org
Sender: owner-FreeBSD-net-jp@jp.freebsd.org
X-Originator: msuzuki@isf.co.jp

$B$*$O$h$&$4$6$$$^$9!#(J
$BNkLZM%$H?=$7$^$9!#(J

$B@hF|$h$j2?EY$+(Jppp$B$N@_Dj$K$D$$$F$465<x$$$?$@$$$F$$$?$N$G$9$,!"(J
$B$d$O$j$&$^$/$$$-$^$;$s!#(J
$B%W%m%P%$%@$K$O@\B3$G$-$k$N$G$9$,!"(Jping$B$,30$K=P$F9T$+$J$$$s$G$9!#(J
$B%k!<%F%#%s%0$N@_Dj$+$H;W$&$N$G$9$,!#(J
$BFC$K(Jnetstat$B$N7k2L$G2x$7$$ItJ,$,$"$k$s$G$9$,!&!&!&(J
$B0J2<!"3F<o@_Dj%U%!%$%kEy$G$9!#(J(FreeBSD3.2RELEACE)

------------ /etc/ppp/ppp/conf -----------
default:
 allow user admin
 set device /dev/cuaa0
 set log Phase Chat LCP IPCP CCP tun command
 set speed 115200
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK
ATQ0V1$N11=0&D0
 OK \\dATDT\\T TIMEOUT 40 CONNECT"

myprovider:
 set speed 115200
 accept pap
 set phone **********
 set authname ********
 set authkey ********
 set openmode active
 disable lqr
 deny lqr
 set timeout 180
 set ifaddr 192.168.0.1/0 210.165.248.119/0     
 set login ""
 add default HISADDR

------------ /etc/ppp/ppp/linkup -----------
myprovider:
 delete ALL
 add 0 0 HISADDR

------------ /etc/ppp/ppp/linkdown -----------
myprovider:
 delete ALL
 add 0 0 HISADDR

----- $B%W%m%P%$%@@\B38e$N(Jifconfig$B$N7k2L(J
gw# ifconfig -a
ed1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
        ether 00:90:99:10:aa:1c
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1524
        inet 210.165.72.139 --> 210.165.248.119 netmask 0xffffff00
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000

----- $B%W%m%P%$%@@\B38e$N(Jping$B$N7k2L(J
gw# ping 210.165.248.119                                      //$B%W%m%P%$%@$N(J
$B@\B3@h$X(J
PING 210.163.25.2 (210.163.25.2): 56 data bytes$B!!!!!!!!!!(J//$B1~Ez$J$7(J

gw# ping 210.163.25.2                                          //$B30$N%M%C%H(J
$B%o!<%/$X(J
PING 210.163.25.2 (210.163.25.2): 56 data bytes$B!!!!!!!!!!(J//$B1~Ez$J$7(J

----- $B%W%m%P%$%@@\B38e$N(Jtcpdump$B$N7k2L(J
gw# netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags     Refs     Use     Netif Expire
default            210.165.248.119    $B!!(JUGSc        3        3     tun0
127.0.0.1         $B!!(J 127.0.0.1         $B!!!!(J UH          0        1      lo0
192.168        $B!!(J    link#1           $B!!!!(J  UC          0        0      ed1
192.168.0.10       0:90:99:17:3e:f6   $B!!(JUHLW        1       79      ed1   1168
210.165.72.139    $B!!!!(J 127.0.0.1          UH          0        0      lo0$B!!(J
$B!!!!!!!!!!!!(J//$B"+$3$NItJ,$,0lHV2x$7$$$H;W$&$s$G$9$,!&!&(J
210.165.248.119   $B!!(J 210.165.72.139     UH          1        1     tun0

------------ /etc/rc.conf -----------

# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.  You should
# not edit this file!  Put any overrides into one of the ${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# All arguments must be in double or single quotes.
#
#       $Id: rc.conf,v 1.1.2.5 1999/05/11 12:21:22 newton Exp $

##############################################################
### Important initial Boot-time options  #####################
##############################################################

swapfile="NO"           # Set to name of swapfile if aux swapfile desired.
apm_enable="NO"         # Set to YES if you want APM enabled.
pccard_enable="NO"      # Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT"    # If pccard_enable=YES, this is card memory address.
pccard_ifconfig="NO"    # Specialized pccard ethernet configuration (or NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic
script
dirs
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"

##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network options: ###
hostname="gw.beatles.org"       # Set this!
nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
firewall_enable="YES"           # Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the
firewall
firewall_type="OPEN"            # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO"             # Set to YES to suppress rule display
natd_program="/sbin/natd"       # path to natd, if you want a different one.
natd_enable="YES"                # Enable natd (if firewall_enable == YES).
natd_interface="tun0"           # Public interface or IPaddress to use.
natd_flags="-log -m"                   # Additional flags for natd.
tcp_extensions="NO"             # Disallow RFC1323 extensions (or YES).
network_interfaces="ed1 lo0"    # List of network interfaces (lo0 is
loopback).
ifconfig_lo0="inet 127.0.0.1"   # default loopback device configuration.
ifconfig_ed1="inet 192.168.0.1 netmask 255.255.255.0"
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias
entry.
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters.  Refer to spppcontrol(8) for their meaning.
#sppp_interfaces=""             # List of sppp interfaces.
#sppp_interfaces="isp0"         # example: sppp over ISDN
#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret'
hisauthna
me=some-gw hisauthsecret='another secret'"

### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES"            # Run syslog daemon (or NO).
syslogd_flags=""                # Flags to syslogd (if enabled).
inetd_enable="YES"              # Run the network daemon dispatcher (or NO).
inetd_flags=""                  # Optional flags to inetd.
#
# named.  It may be possible to run named in a sandbox, man security for
# details.
#
named_enable="NO"               # Run named, the DNS server (or NO).
named_program="named"           # path to named, if you want a different one.
named_flags=""                  # Flags for named
#named_flags="-u bind -g bind"  # Flags for named

kerberos_server_enable="NO"     # Run a kerberos master server (or NO).
kadmind_server_enable="NO"      # Run kadmind (or NO) -- do not run on
                                # a slave kerberos server
kerberos_stash=""               # Is the kerberos master key stashed?
rwhod_enable="NO"               # Run the rwho daemon (or NO).
rwhod_flags=""                  # Flags for rwhod
amd_enable="NO"                 # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
amd_map_program="NO"            # Can be set to "ypcat -k amd.master"
nfs_client_enable="NO"          # This host is an NFS client (or NO).
nfs_client_flags="-n 4"         # Flags to nfsiod (if enabled).
nfs_access_cache="2"            # Client cache timeout in seconds
nfs_server_enable="NO"          # This host is an NFS server (or NO).
nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO"           # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES"          # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES"            # Run the portmapper service (or NO).
portmap_program="/usr/sbin/portmap"     # path to portmap, if you want a
different
one.
portmap_flags=""                # Flags to portmap (if enabled).
rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
keyserv_flags=""                # Flags to keyserv (if enabled).
rarpd_enable="NO"               # Run rarpd (or NO).
rarpd_flags=""                  # Flags to rarpd.
xtend_enable="NO"               # Run the X-10 power controller daemon.
xtend_flags=""                  # Flags to xtend (if enabled).

### Network Time Services options: ###
timed_enable="NO"               # Run the time daemon (or NO).
timed_flags=""                  # Flags to timed (if enabled).
ntpdate_enable="NO"             # Run the ntpdate to sync time (or NO).
ntpdate_program="ntpdate"       # path to ntpdate, if you want a different
one.
ntpdate_flags=""                # Flags to ntpdate (if enabled).
xntpd_enable="NO"               # Run xntpd Network Time Protocol (or NO).
xntpd_program="xntpd"           # path to xntpd, if you want a different one.
xntpd_flags="-p /var/run/xntpd.pid"     # Flags to xntpd (if enabled).

# Network Information Services (NIS) options: ###
nis_client_enable="NO"          # We're an NIS client (or NO).
nis_client_flags=""             # Flags to ypbind (if enabled).
nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
nis_ypset_flags=""              # Flags to ypset (if enabled).
nis_server_enable="NO"          # We're an NIS server (or NO).
nis_server_flags=""             # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).

### Network routing options: ###
defaultrouter="YES"             # Set to default gateway (or NO).
static_routes=""                # Set to static route list (or leave empty).
gateway_enable="YES"            # Set to YES if this host will be a gateway.
router_enable="YES"             # Set to YES to enable a routing daemon.
router="routed"                 # Name of routing daemon to use if enabled.
router_flags="-s"                       # Flags for routing daemon.
mrouted_enable="NO"             # Do multicast routing (see
/etc/mrouted.conf).
mrouted_flags=""                # Flags for multicast routing daemon.
ipxgateway_enable="NO"          # Set to YES to enable IPX routing.
ipxrouted_enable="NO"           # Set to YES to run the IPX routing daemon.
ipxrouted_flags=""              # Flags for IPX routing daemon.
arpproxy_all=""                 # replaces obsolete kernel option
ARP_PROXYALL.
forward_sourceroute="NO"        # do source routing (only if gateway_enable
is set
to "YES")
accept_sourceroute="NO"         # accept source routed packets to us

### ATM interface options: ###
atm_enable="NO"                 # Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1"         # Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31"        # Signalling manager for physical interface.
#atm_prefix_hea0="ILMI"         # NSAP prefix (UNI interfaces only) (or ILMI).
#atm_macaddr_hea0="NO"          # Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" #
ATMARP s
erver address (or local).
#atm_scsparp_atm0="NO"          # Run SCSP/ATMARP on network interface (or
NO).
atm_pvcs=""                     # Set to PVC list (or leave empty).
atm_arps=""                     # Set to permanent ARP list (or leave empty).

### ISDN interface options: ###
isdn_enable="NO"                # Enable the ISDN subsystem (or NO).
isdn_fsdev="/dev/ttyv4"         # Output device for fullscreen mode (or NO
for daem
on mode).
isdn_flags="-dn -d0x1f9"        # Flags for isdnd
isdn_trace="NO"                 # Enable the ISDN trace subsystem (or NO).
isdn_traceflags="-f /var/tmp/isdntrace0"        # Flags for isdntrace

### Miscellaneous network options: ###
icmp_bmcastecho="NO"    # respond to broadcast ping packets


##############################################################
###  System console options  #################################
##############################################################

keymap="jp.106"         # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
keybell="NO"            # bell to duration.pitch or normal or visual (or NO).
keychange="NO"          # function keys default values (or NO).
cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
saver="NO"              # screen saver: Uses /modules/${saver}_saver.ko
moused_enable="NO"      # Run the mouse daemon.
moused_type="auto"      # See man page for rc.conf(5) for available settings.
moused_port="/dev/cuaa0" # Set to your mouse port.
moused_flags=""         # Any additional flags to moused.
allscreens_flags=""     # Set this vidcontrol mode for all virtual screens


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

cron_enable="YES"       # Run the periodic job daemon.
lpd_enable="NO"         # Run the line printer daemon.
lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
lpd_flags=""            # Flags to lpd (if enabled).
usbd_enable="NO"        # Run the usbd daemon.
usbd_flags=""           # Flags to usbd (if enabled).
sendmail_enable="NO"    # Run the sendmail daemon (or NO).
sendmail_flags="-bd" # Flags to sendmail (if enabled)
dumpdev="NO"            # Device name to crashdump to (if enabled).
enable_quotas="NO"      # turn on quotas on startup (or NO).
check_quotas="NO"       # Check quotas on startup (or NO).
accounting_enable="NO"  # Turn on process accounting (or NO).
ibcs2_enable="NO"       # Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="NO"       # Linux emulation loaded at startup (or NO).
rand_irqs="NO"          # Stir the entropy pool (like "5 11" or NO).
clear_tmp_enable="NO"   # Clear /tmp at startup.
ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib"
                        # shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout
/usr/local/lib/aout"
                        # a.out shared library search paths
kern_securelevel_enable="NO"    # kernel security level (see init(8)),
kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
update_motd="YES"       # update version info in /etc/motd (or NO)
start_vinum=""          # set to YES to start vinum
vinum_drives=""         # put in names of disks containing vinum drives
                        # to start vinum on only specific disks.

##############################################################
### Allow local configuration override at the very end here ##
##############################################################
#
#

$B0J>e%:%i%:%i$HJB$Y$F$7$^$$$^$7$?!#(J
$B$I$&$7$F$b2r7h$7$?$$$b$N$G!&!&!&(J
$B$$$m$$$m$H;n$7$?$N$G$9$,BLL\$G$9!#(J
$B2?8N$G$7$g$&!)(J

$BNkLZM%(J
