From owner-FreeBSD-tech-jp@jp.freebsd.org  Thu Aug 28 15:30:36 1997
Received: by jaz.jp.freebsd.org (8.8.7+2.7Wbeta7/8.7.3) id PAA24648
	Thu, 28 Aug 1997 15:30:36 +0900 (JST)
Received: by jaz.jp.freebsd.org (8.8.7+2.7Wbeta7/8.7.3) with ESMTP id PAA24618
	for <FreeBSD-tech-jp@jp.freebsd.org>; Thu, 28 Aug 1997 15:30:33 +0900 (JST)
Received: from fdmmail.fujitsu.co.jp by fgwmail.fujitsu.co.jp (8.8.7+2.7Wbeta6/3.5Wpl7-MX970822-Fujitsu Mail Gateway)
	id PAA06167; Thu, 28 Aug 1997 15:30:32 +0900 (JST)
Received: from daemon.pssys.flab.fujitsu.co.jp by fdmmail.fujitsu.co.jp (8.8.5+2.7Wbeta5/3.5Wpl3-970822-Fujitsu Domain Mail Master)
	id PAA19270; Thu, 28 Aug 1997 15:30:00 +0900 (JST)
Received: from daemon.pssys.flab.fujitsu.co.jp (localhost [127.0.0.1])
	by daemon.pssys.flab.fujitsu.co.jp (8.8.5/8.8.5) with ESMTP id PAA15887;
	Thu, 28 Aug 1997 15:30:41 +0900 (JST)
Message-Id: <199708280630.PAA15887@daemon.pssys.flab.fujitsu.co.jp>
To: bsd-nomads@ai.cs.fujitsu.co.jp
Cc: FreeBSD-tech-jp@jp.freebsd.org
From: Masahide NODA/=?ISO-2022-JP?B?GyRCJE4kQCReJDUkUiRHGyhC?= <mac@flab.fujitsu.co.jp>
In-Reply-To: Your message of "Thu, 28 Aug 1997 13:34:08 +0900 (JST)"
References: <199708280434.NAA00286@lenlen.ntc.keio.ac.jp>
X-Mailer: Mew version 1.70 on Emacs 19.34.2 / Mule 2.3
Mime-Version: 1.0
Content-Type: Text/Plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit
Date: Thu, 28 Aug 1997 15:30:41 +0900
Reply-To: mrak@ga2.so-net.or.jp
Precedence: bulk
X-Distribute: distribute [version 2.1 (Alpha) patchlevel=20]
X-Sequence: FreeBSD-tech-jp 536
Subject: [FreeBSD-tech-jp 536] Re: [bsd-nomads:05369] Re: 2.2.2-RELEASE new sys patch
Errors-To: owner-FreeBSD-tech-jp@jp.freebsd.org
Sender: owner-FreeBSD-tech-jp@jp.freebsd.org

$B$N$@$J$N$@!#(B

From: hosokawa@ntc.keio.ac.jp (HOSOKAWA Tatsumi)
Subject: [bsd-nomads:05369] Re: 2.2.2-RELEASE new sys patch
Date: Thu, 28 Aug 1997 13:34:08 +0900 (JST)

> >> PAO $B$N<!4|%P!<%8%g%s$N%Q%C%A%F%9%HHG$G$9!#(B

> ftp://jaz.jp.freebsd.org/pub/FreeBSD-jp/PAO/test/sys-pao-970828-test.patch.gz

$B;n$7$F8+$^$7$?!#7k2L!"(Bpccardc $B$r(B $BF0$+$9$H$3$m$G!"(B

	# /usr/sbin/pccardc pccardmem 0xd0000
	/dev/card0: Device not configured

$B$H(B $B$$$o$l$F$7$^$$!"%+!<%I$,G'<1$G$-$^$;$s$G$7$?!#$H$O$$$(!"$\$/$b$h$/J,(B
$B$+$C$F$$$J$$ItJ,$,$"$k$N$G(B $B$J$K$+JQ$J;v$r$7$F$$$k$+$bCN$l$^$;$s$,!#(B(^^;

$B%^%7%s$O(B FMV-5133NP/W $B$G!"(BCardBus $B%3%s%H%m!<%i$O(B TI PCI-1130 $B$G$9!#(B
suspend $B$O$&$^$/$$$-$^$9(B($B4X78$J$$$+(B)$B!#(B
	
$B0J2<$K(B $B%V!<%H;~$N(B boot: -v $B$N%m%0$r$D$1$^$9!#(B

Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California.  All rights reserved.

FreeBSD 2.2.2-RELEASE #0: Thu Aug 28 14:20:29 JST 1997
    root@gnome.dungeon.or.jp:/usr/src/sys/compile/gnome
Calibrating clock(s) ... i586 clock: 132876063 Hz, i8254 clock: 1193213 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (132.87-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x52c  Stepping=12
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 50331648 (49152K bytes)
avail memory = 46145536 (45064K bytes)
Initializing PC-card drivers: aic ed ep fe sn wlp scc sio spc wdc ncv stg 
pcibus_setup(1):	mode 1 addr port (0x0cf8) is 0x8000084c
pcibus_setup(1a):	mode1res=0x80000000 (0x80000000)
pcibus_check:	device 0 is there (id=12358086)
Probing for devices on PCI bus 0:
	configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=8086 device=1235 subclass=0)> rev 2 on pci0:0
chip1 <generic PCI bridge (vendor=8086 device=1234 subclass=128)> rev 3 on pci0:1
pci0:2:    CMD, device=0x0643, class=storage (ide) int a irq 15 [no driver assigned]
	map(10): io(01f0)
	map(14): io(03f4)
	map(18): io(0170)
	map(1c): io(0374)
	map(20): io(f8f0)
pcic0 <TI PCI-1130 PCMCIA/CardBus Bridge> rev 4 int a irq ?? on pci0:19:0
	mapreg[14] type=0 addr=02000000 size=fe000000.
TI PCI-113X: unit 0, Legacy PC-card 16bit I/O address [0x3e0]
TI PCI-113X: device control register [0x72]
TI PCI-113X: device control register is set to [0x72]
PCI Config space:
00:  ac12104c 02000107 06070004 00824008
10:  00000000 02000000 00010100 00000000
20:  00000000 00000000 00000000 00000000
30:  00000000 00000000 00000000 04c001ff
40:  00000000 000003e1 00000000 00000000
50:  00000000 00000000 00000000 00000000
60:  00000020 00000000 00000000 00000000
70:  00000000 00000000 00000000 00000000
80:  00243020 00000000 00000000 00000000
90:  0072bac0 00000000 00000000 00000000
Cardbus Socket registers:
00:  f000ff53: f000ff53: f000e2c3: f000ff53:
10:  f000ff53: f000ff54: f0004913: f000ff53:
ExCa registers:
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
pcic1 <TI PCI-1130 PCMCIA/CardBus Bridge> rev 4 int b irq ?? on pci0:19:1
	mapreg[14] type=0 addr=02000000 size=fe000000.
TI PCI-113X: unit 1, Legacy PC-card 16bit I/O address is set to 0x3e3 (res: 0x3e2)
TI PCI-113X: device control register [0x72]
TI PCI-113X: device control register is set to [0x72]
PCI Config space:
00:  ac12104c 02000107 06070004 00824008
10:  00000000 02000000 00010100 00000000
20:  00000000 00000000 00000000 00000000
30:  00000000 00000000 00000000 04c001ff
40:  00000000 000003e3 00000000 00000000
50:  00000000 00000000 00000000 00000000
60:  00000020 00000000 00000000 00000000
70:  00000000 00000000 00000000 00000000
80:  00243020 00000000 00000000 00000000
90:  0072bac0 00000000 00000000 00000000
Cardbus Socket registers:
00:  f000ff53: f000ff53: f000e2c3: f000ff53:
10:  f000ff53: f000ff54: f0004913: f000ff53:
ExCa registers:
00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
vga0 <VGA-compatible display device> rev 5 on pci0:20
	mapreg[10] type=0 addr=fd000000 size=1000000.
pci0: uses -50331648 bytes of memory from 2000000 upto ffffffff.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0047
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 01 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 ff ff 9c 0e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 00 00 00 00 00 00 10 0e 00 ff 
sc0: video mode:24
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1: disabled, not probed.
fe0 not found at 0x300
fe1: disabled, not probed.
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3: disabled, not probed.
sio4: disabled, not probed.
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
psm0: current command byte:0047
kbdio: TEST_AUX_PORT status:0000
kbdio: RESET_AUX return code:00fa
kbdio: RESET_AUX status:00aa
kbdio: RESET_AUX ID:0000
psm0: status after reset 00 03 64
psm: status 00 00 64 (get_mouse_buttons)
psm0: status 00 03 64
psm0 at 0x60-0x64 irq 12 on motherboard
psm0: device ID 0, 2 buttons
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <TOSHIBA MK1301MAV>
wd0: 1295MB (2654064 sectors), 2633 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-38E/4.0D>, removable, accel, ovlap, dma, iordis
atapi1.0: unknown phase
wdc2: disabled, not probed.
wdc3: disabled, not probed.
aic0 not found at 0x340
spc0: init failed, driver disabled
spc0 not found at 0x320
ncv0 not found at 0x320
stg0 not found at 0x320
ep0 not found at 0x300
ep1: disabled, not probed.
sn0 not found at 0x300
sn1: disabled, not probed.
wlp0 not found at 0x300
wlp1: disabled, not probed.
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: found APM BIOS version 1.1
scc0 not found at 0x240
scc1: disabled, not probed.
sb0 at 0x220 irq 5 drq 1 on isa
sb0: <SoundBlaster Pro 3.1>
sbxvi0 not found
sbmidi0 not found at 0x330
opl0 at 0x388 on isa
opl0: <Yamaha OPL-3 FM>
imasks: bio c000c040, tty c003109a, net c003109a
Checking slot 0.
PCIC ID = 0xff
Checking slot 1.
PCIC ID = 0xff
Checking slot 2.
PCIC ID = 0xff
Checking slot 3.
PCIC ID = 0xff
Checking slot 4.
PCIC ID = 0xff
Checking slot 5.
PCIC ID = 0xff
Checking slot 6.
PCIC ID = 0xff
Checking slot 7.
PCIC ID = 0xff
BIOS Geometries:
 0:02903f3f 0..656=657 cylinders, 0..63=64 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
Considering FFS root f/s.
configure() finished.
bpf: tun0 attached
bpf: sl0 attached
bpf: lo0 attached
wd0s1: type 0x6, start 63, end = 1334591, size 1334529 : OK
wd0s2: type 0xa5, start 1334592, end = 2653055, size 1318464 : OK

-- 
$B$N$@$^$5$R$G!w$U$8$D$&$1$s$-$e$&$8$g(B <mailto:mac@flab.fujitsu.co.jp>
                                     <http://www.st.rim.or.jp/~mac/>
                 teo world home page <http://www.teo-world.com>
