From owner-FreeBSD-users-jp@jp.freebsd.org  Fri Oct 30 01:25:31 1998
Received: (from daemon@localhost)
	by jaz.jp.freebsd.org (8.9.1+3.1W/8.7.3) id BAA02604;
	Fri, 30 Oct 1998 01:25:31 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from dora.home (kksy3DS72.fko.mesh.ad.jp [210.147.180.164])
	by jaz.jp.freebsd.org (8.9.1+3.1W/8.7.3) with ESMTP id BAA02596
	for <FreeBSD-users-jp@jp.freebsd.org>; Fri, 30 Oct 1998 01:25:25 +0900 (JST)
	(envelope-from manpou@mxp.meshnet.or.jp)
Message-Id: <199810291625.BAA02596@jaz.jp.freebsd.org>
Received: from localhost (localhost.akiyama.jp [127.0.0.1] (may be forged))
	by dora.home (8.8.8/8.8.8) with ESMTP id AAA00294
	for <FreeBSD-users-jp@jp.freebsd.org>; Fri, 30 Oct 1998 00:42:48 +0900 (JST)
	(envelope-from manpou@mxp.meshnet.or.jp)
To: FreeBSD-users-jp@jp.freebsd.org
X-Mailer: Mew version 1.92.4 on Emacs 19.28 / Mule 2.3 (SUETSUMUHANA)
Mime-Version: 1.0
Content-Type: Text/Plain; charset=iso-2022-jp
Content-Transfer-Encoding: 7bit
Date: Fri, 30 Oct 1998 00:41:27 +0900
From: M_Akiyama <manpou@mxp.meshnet.or.jp>
X-Dispatcher: imput version 971024
Lines: 408
Reply-To: FreeBSD-users-jp@jp.freebsd.org
Precedence: list
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+980914
X-Sequence: FreeBSD-users-jp 34627
Subject: [FreeBSD-users-jp 34627] Can't run Samba.
Errors-To: owner-FreeBSD-users-jp@jp.freebsd.org
Sender: owner-FreeBSD-users-jp@jp.freebsd.org


  $B$3$s$K$A$O!*(B $B=);3!wKL6e=#8MH*$G$9!#(B(from FreeBSD 2.2.6-R)

  $B@hF|!"!V(BFreeBSD$BE0Dl3hMQ(B $B#1(B $B%M%C%H%o!<%/JT!W$H$$$&;29M=q$rGc$$$^$7$?!#(B
$B$3$NK\$r;29M$K$7$F!"(BSamba $B$r%$%s%9%H!<%k$7$F(B MS-Windows95 $B$H$N%M%C%H(B
$B%o!<%/@_Dj$r;O$a$^$7$?!#(B

$B9=@.$O<!$N$H$*$j$G$9!#(Bsamba-1.9.18.8 $B$O;29M=qIUB0$N(B FreeBSD 2.2.7-R $BMQ(B
CD $B$+$i%Q%C%1!<%8$G%$%s%9%H!<%k$7$F$$$^$9!#(Bsamba-1.9.18.10 $B$bF1MM$K%$%s(B
$B%9%H!<%k$7$F;n$7$F8+$^$7$?$,!"7k2L$OF1$8$G$7$?!#(BFreeBAS 2.2.7-R $B$O!"(B
UNIX USER $B#1#17n9f$N(B CD $B$+$i?75,%$%s%9%H!<%k$7$F$$$^$9!#(B

PC$B#1(B $B%^%7%sL>(B EVA    FreeBSD 2.2.7-R (MS-Windows95b $B$b%$%s%9%H!<%k(B)
                     samba-1.9.18.8
                     DNS $B%5!<%P!<(B   domain = home
                     ed0 = 192.168.128.2  eva.home

PC$B#2(B $B%^%7%sL>(B DORA   MS-Windows95 (b $B$G$O$"$j$^$;$s(B)
                     ed0 = 192.168.128.12 natu.home

$BN>J}$N%o!<%/%0%k!<%WL>$O!"(B MYGROUP  $B$H$7$F$$$^$9!#(B

$B$,!"(BSamba $B$O@5>o$K2TF/$7$F$$$J$$$h$&$G$9!#(B
$B5/F03NG'$r<!$N$h$&$K9T$C$F$_$k$H!"(B

% ps auxw | grep mbd
akiyama    228  0.0  0.8   240  480  p0  S+    8:37AM    0:00.04 grep mbd
root       178  0.0  1.2   632  736  ??  Is    8:20AM    0:00.01 /usr/local/sbin/smbd -D
root       180  0.0  1.2   480  768  ??  Ss    8:20AM    0:00.11 /usr/local/sbin/nmbd -D
% 

$B$H(Bsmbd $B$H(B nmbd $B$N%W%m%;%9$O<B9T$5$l$F$$$^$9$,!"(B

$B<!$N$h$&$K(B
smbclient $B%3%^%s%I$r<B9T$9$k$H!"(B

% smbclient -L 127.0.0.1
Added interface ip=192.168.128.2 bcast=192.168.128.255 nmask=255.255.255.0
Session request failed (0,0) with myname=EVA destname=127.0.0.1
Unspecified error 0x0
Your server software is being unfriendly
%

$B$H$$$&%(%i!<%a%C%;!<%8$,JV$5$l$^$9!#(B
MS-Windows95 $B$+$i3NG'$7$F$b!"8+$($F$$$^$;$s!#(B
MS-Windows95 $B$N(B "Microsoft$B%M%C%H%o!<%/6&M-%5!<%S%9(B"$B$r@_Dj$9$k$H(B EVA $B$H$$$&(B
$B%^%7%sL>$OI=$l$^$9!#$,!"%/%j%C%/$7$F$b(B"$B%M%C%H%o!<%/$K%"%/%;%9$G$-$^$;$s(B"$B$N%a%C%;(B
$B!<%8$,=P!"%U%!%$%k$K%"%/%;%9=PMh$^$;$s!#(B
ping $B%3%^%s%I$OAPJ}$+$iAw$l$^$9!#(BMS-Windows95 $B$+$i$O(B telnet $B$G(B EVA $B%^%7%s(B
$B$K%m%0%$%s$O=PMh$F$$$^$9!#(B

$B@_Dj%U%!%$%k4X78$O;29M=q$N(B sample $B%U%!%$%k$r$=$N$^$^%3%T!<$7!"JT=8$;$:$K;H$C$F$$$^$9!#(B

$B2?$,860x$G@5>o$K2TF/$7$J$$$N$+$+$5$C$Q$jH=$j$^$;$s!#8!:w$G$3$N%(%i!<%a%C%;!<%8$H$7$FF1$8(B
$B$b$N$,=P$F$$$k$H$$$&Ej9F$,M-$j$^$7$?$,!"$=$N7k2L$,$I$&$J$C$?$+$K$D$$$F$OA\$9$3$H$,=PMh(B
$B$^$;$s$G$7$?!#(B

$B$h$m$7$/$*4j$$$$$?$7$^$9!#(B

$B@_Dj$7$?%U%!%$%k$O!"<!$N#2$D$G$9!#(B

---------- /usr/local/etc/rc.d/samba.sh-----------
#!/bin/sh
smbspool=/var/spool/samba
smbd=/usr/local/sbin/smbd
nmbd=/usr/local/sbin/nmbd

if [ -f $smbd ]; then
        if [ -d $smbspool ]; then
                rm -f $smbspool/*
        fi
        echo -n ' Samba'
        $smbd -D
        $nmbd -D
fi

---------- /usr/local/etc/smb.conf-----------

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = MYGROUP

# server string is the equivalent of the NT Description field
   server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
# Use password server option only with security = server
;   password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
;  encrypt passwords = yes

# Unix users can map to different SMB User names
;  username map = /etc/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY 

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

# Client codepage settings

# for Greek users
; client code page=737

# for European users (Latin 1)
; client code page=850

# for European users (Latin 2)
; client code page=852

# for Icelandic users
; client code page=861

# for Cyrillic users
; client code page=866

# for Japanese Users
; client code page=932
; coding system=cap

# for Simplified Chinese Users
; client code page=936
; coding system=cap

# for Korean Users
; client code page=949
; coding system=cap


# for Traditional Chinese Users
; client code page=950
; coding system=cap

# Samba performance workaround:
#  If you have performance problem, please test these parameters.
# Simon Lindgren <simon@lindgren.no> 's example:
;   getwd cache = Yes
;   max xmit = 8192
;   read raw = yes
;   read prediction = yes
;   read size = 8192
;   socket options = IPTOS_LOWDELAY TCP_NODELAY
# Jerry Bell <bell@reillyplating.com> 's example:
;   socket options = IPTOS_LOWDELAY TCP_NODELAY SO_SNDBUF=16384 SO_RCVBUF=16384
;   readsize = 16384
;   read prediction = true

#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no


   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


----------------<$B2+6bN'(B>----------------------------
$B!V$=$l$f$(!"<+J,$K$7$FM_$7$$$H;W$&$3$H$O$_$J!"(B
  $BF1$8$h$&$K?M$K$b$7$F$"$2$J$1$l$P$J$j$^$;$s!#!W(B
$B=);3(B $BK~K.(B $B!Z(Bmail$B![(Bmanpou@mxp.meshnet.or.jp
$B!Z(BPC-UNIX $BI(7*LS![(Bhttp://www2.meshnet.or.jp/~akiyama/


