From owner-FreeBSD-users-jp@jp.FreeBSD.org Wed May 21 15:24:20 2003
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id h4L6OKZ89166;
	Wed, 21 May 2003 15:24:20 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from mail531.nifty.com (mail531.nifty.com [202.248.37.220])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id h4L6OKY89161
	for <FreeBSD-users-jp@jp.FreeBSD.org>; Wed, 21 May 2003 15:24:20 +0900 (JST)
	(envelope-from sakatuba@nifty.com)
Received: from [152.62.23.136] (unk-for-smtp.isus.emc.com [128.222.32.10])by mail531.nifty.com with ESMTP id h4L6O5q0027011
	for <FreeBSD-users-jp@jp.FreeBSD.org>; Wed, 21 May 2003 15:24:07 +0900
From: Tsubasa Sakamoto <sakatuba@nifty.com>
To: FreeBSD-users-jp@jp.FreeBSD.org
In-Reply-To: <030521133923.M0108472@shimako.imasy.or.jp>
References: <20030521112627.B0B9.SAKATUBA@nifty.com> <030521133923.M0108472@shimako.imasy.or.jp>
Message-Id: <20030521144652.B0C1.SAKATUBA@nifty.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-2022-JP"
Content-Transfer-Encoding: 7bit
X-Mailer: Becky! ver. 2.05.11
Reply-To: FreeBSD-users-jp@jp.FreeBSD.org
Precedence: list
Date: Wed, 21 May 2003 15:24:08 +0900
X-Sequence: FreeBSD-users-jp 74592
Subject: [FreeBSD-users-jp 74592] Re: Sony PCG-C1XG
 =?ISO-2022-JP?B?GyRCJEckThsoQg==?= FreeBSD
 =?ISO-2022-JP?B?GyRCJE5GMDpuIUo8ZyRLGyhC?=
 PC-Card =?ISO-2022-JP?B?GyRCPH4kaiRHGyhC?=)
Sender: owner-FreeBSD-users-jp@jp.FreeBSD.org
X-Originator: sakatuba@nifty.com
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+030514

$B:dK\(B@$B2#IM$G$9!#(B

$BAaB.!"1n4]$5$s$N$4;XE&$I$*$j$K%A%'%C%/!u(BTry$B$7$F$_$^$7$?!#(B

Wed, 21 May 2003 13:39:23 +0900$B$K(B
mistral@imasy.or.jp (Yoshihiko Sarumaru) $B$5$s$O(B $B$3$&=q$-$^$7$?(B:

YS> $B!!;d$O(B 505R $B$G(B
YS> hw.pcic.intr_path=1
YS> hw.pcic.irq=0
YS> $B$H$7$F$^$9$,!"(Binit_path $B$H$+(B intr_route $B$OBG$A4V0c$$!)(B  man 4
YS> pcic $B$7$F$b$=$N$h$&$J(B MIB $B$O$J$$$h$&$G$9$,!D!D!#(B

intr_route$B$O(Binit_routing$B$N(Btypo$B$G$9!#L5;k$7$F$/$@$5$$!#(B

$BAaB.(B/boot/loader.conf$B$K(B
	set hw.pcic.intr_path=1
	set hw.pcic.irq=0
$B$rDI5-$7$F(Breboot$B!"N)$A>e$,$C$?=j$G(BPC$B%+!<%I$rA^$7$F$_$^$7$?!#(B
$B!D!D$,!"$d$C$Q$j%O%s%0$7$^$9!#A4$/2?$bH?1~$7$^$;$s!#(B

$B$A$J$_$K(B sysctl -a | grep pcic$B!!$N=PNO$O!"(B
hw.pcic.irq: 0
hw.pcic.boot_deactivated: 0
hw.pcic.pd6722_vsense: 1
hw.pcic.ignore_function_1: 0
hw.pcic.intr_path: 1
hw.pcic.init_routing: 0
hw.pcic.ignore_pci: 0
hw.pcic.pd6729_intr_path: 1
hw.pcic.ti12xx_enable_pci_clock: 0
$B$G$7$?!#(B


YS> $B;d$N$d$D(B (505R) $B$O(B
YS> pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 10.0 on pci0
YS> pcic0: PCI Memory allocated: 0x88000000
YS> pcic0: Polling mode
YS> $B$H$G$F$^$9!#%A%C%W$OF1$8$G$9$M!#(BIRQ $B$O3d$jEv$F$F$J$$(B (0 $B$r3d$jEv(B
YS> $B$F(B) $B$N$G!"(BPolling mode $B$GF0$$$F$^$9!#(B

$B$3$A$i$b(Bhw.pcic.intr_path=1$B$7$?$i(BPolling mode$B$OI=<($5$l$k$h$&$K$J$j$^$7(B
$B$?!#(B
device$B$,(B12.0$B$K$J$C$F$$$^$9$,!"$3$l$O(B505R$B$H(BC1XG$B$N%O!<%I$N0c$$$H8@$&;v$G(B
$B$9$h$M!)(B

YS>   $B%T%s$,%7%g!<%H$7$F$k$s$G$J$1$l$P!"%T%s$,6J$,$C$F$$$k$?$a$K(B
YS> $B$I$&$3$&$H$$$&$N$O$J$$$H;W$&$s$G$9$1$I$M!D!D!#(B
YS> $B!!;d$N$H$3$G$b(B intr_pathq=1 $B$@$H!"%+!<%I$rA^$7$?$i%O%s%0$7$^$9!#(B

$B$"$l$l!)!)(B
intr_path=1$B$@$H%+!<%I$rA^$9$H%O%s%0$9$k$s$G$9$+!)!)(B
$B$=$l$C$F$5$C$-$N;XE&$HL7=b$7$F$7$^$&$h$&$J5$$,$9$k$N$G$9$,!#(B
boot$BA0$+$i%+!<%I$rA^$7$?$^$^;H$&$H$$$&$3$H$G$7$g$&$+!)(B

$B$A$J$_$K!"(Birq=0$B$@$1$G$d$C$F$_$?>l9g!"(B
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
$B$G!"(BPolling$B$8$c$J$$%b!<%I$GF0$$$F$$$k$_$?$$$G$9$M!#(B
$B!J(BPCI$B7PM3$H$$$&$3$H$G$7$g$&$+!)!K(B


YS>   $B$"$H!"(B5.x $B7O$r;H$&$N$G$"$l$P!"$?$V$s(B NEWCARD $B$O;H$($^$;$s!#(B
YS> OLDCARD $B$G2fK}$7$^$7$g$&!D!D!#:#$O(B 5.0-RELEASE-pX $B$G1?MQ$7$F$^$9(B
YS> $B$,!"%$%s%9%H!<%kMQ(B kernel (NEWCARD) $B$G$O(B pccard $B$,;H$($J$/$F!"(B
YS> DOS partition $B$+$i%$%s%9%H!<%k$7$^$7$?!#(B

$BN;2r$G$9!#(B
$B<j85$K(BCardBus$B@lMQ$N(BNIC$B$,(B1$BKg$"$C$?$N$G$=$,;H$($k$+$H;W$C$FKA81$7$F$_$^$7(B
$B$?!#(B
$B6L:U$7$^$7$?$,!D!D!#(B

YS> $B!!$"!"(BBIOS $B$N(B Plug & Play OS $B$O(B YES $B$K$J$C$F$^$9$+!)!!(BNO $B$K$J$C(B
YS> $B$F$^$9$+!)!!(BNO $B$G$J$$$H$A$c$s$HF0$+$J$+$C$?$+$b(B($BL$3NG'(B)$B!#(B

Plug & Play OS$B$O$A$c$s$H(BNo$B$GF0$+$7$F$$$^$9!#(B

$B$A$g$C$H<j5M$^$j$C$]$/$J$C$F$-$^$7$?!#(B
$BB>$K%A%'%C%/$7$F$_$k$Y$-E@$O$"$j$^$9$G$7$g$&$+!)(B

dmesg$B<h$l$^$7$?$N$GE:IU$7$^$9!#(B
/boot/loader.conf$B$K(B
	set hw.pcic.irq=0
$B$@$1DI2C$7$?;~$N(Bboot -v$B$N7k2L$G$9!#(B
$B!JD9$/$F$9$$$^$;$s!K(B

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Tue May 20 21:50:35 JST 2003
    root@jp1945_2.corp.emc.com:/usr/src/sys/compile/VAIO
Calibrating clock(s) ... TSC clock: 396967709 Hz, i8254 clock: 1193085 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Pentium II Xeon/Celeron (397.00-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x66d  Stepping = 13
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004b1000 - 0x07fe7fff, 129200128 bytes (31543 pages)
avail memory = 125915136 (122964K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6ce0
bios32: Entry = 0xfd880 (c00fd880)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0x11e
pnpbios: Found PnP BIOS data at 0xc00f6d10
pnpbios: Entry = f0000:b332  Rev = 1.0
pnpbios: Event flag at 400
Other BIOS signatures found:
ACPI: 000f6c80
Preloaded elf kernel "kernel" at 0xc048a000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80003904
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=71908086)
Using $PIR table, 8 entries at 0xc00fdf40
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
found->	vendor=0x8086, dev=0x7190, revid=0x03
	class=06-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[10]: type 1, range 32, base 40000000, size 24
found->	vendor=0x8086, dev=0x7191, revid=0x03
	class=06-04-00, hdrtype=0x01, mfdev=0
	subordinatebus=1 	secondarybus=1
found->	vendor=0x8086, dev=0x7110, revid=0x02
	class=06-01-00, hdrtype=0x00, mfdev=1
	subordinatebus=0 	secondarybus=0
found->	vendor=0x8086, dev=0x7111, revid=0x01
	class=01-01-80, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[20]: type 1, range 32, base 0000fc90, size  4
found->	vendor=0x8086, dev=0x7112, revid=0x01
	class=0c-03-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=d, irq=9
	map[20]: type 1, range 32, base 0000fca0, size  5
found->	vendor=0x8086, dev=0x7113, revid=0x03
	class=06-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	map[90]: type 1, range 32, base 00001040, size  4
found->	vendor=0x104d, dev=0x8039, revid=0x02
	class=0c-00-10, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base fedf7000, size 11
	map[14]: type 1, range 32, base fedf7c00, size  9
found->	vendor=0x1073, dev=0x0010, revid=0x02
	class=04-01-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base fedf8000, size 15
	map[14]: type 1, range 32, base 0000fcc0, size  6
	map[18]: type 3, range 32, base 0000fc8c, size  2
found->	vendor=0x136b, dev=0xff01, revid=0x01
	class=04-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base fedf7800, size  9
found->	vendor=0x14f1, dev=0x1036, revid=0x08
	class=07-80-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base fede0000, size 16
	map[14]: type 3, range 32, base 0000fc78, size  3
found->	vendor=0x1180, dev=0x0475, revid=0x80
	class=06-07-00, hdrtype=0x02, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=255
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0x40000000-0x40ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 16M
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
found->	vendor=0x10c8, dev=0x0005, revid=0x20
	class=03-00-00, hdrtype=0x00, mfdev=0
	subordinatebus=0 	secondarybus=0
	intpin=a, irq=9
	map[10]: type 1, range 32, base fd000000, size 24
	map[14]: type 1, range 32, base fe800000, size 22
	map[18]: type 1, range 32, base fec00000, size 20
pci1: <PCI bus> on pcib1
pci1: <NeoMagic MagicMedia 256AV SVGA controller> (vendor=0x10c8, dev=0x0005) at 0.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfc90
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI 00 00
ata0-master: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfc98
ata1: mask=03 ostat0=00 ostat2=00
ata1-master: ATAPI 00 00
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=00
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip0: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
fwohci0: <SONY CX3022> mem 0xfedf7c00-0xfedf7dff,0xfedf7000-0xfedf77ff irq 9 at device 8.0 on pci0
fwohci0: PCI bus latency is 64.
fwohci0: cache size 8.
	using shared irq9.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 08:00:46:03:00:33:5c:59
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 0a:00:46:33:5c:59
bpf: fwe0 attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: BUS reset
fwohci0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=0)
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0
ds1: setmap (b000, 3de4), nseg=1, error=0
pcm0: <Asahi Kasei AK4543 ac97 codec>
pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio
pcm0: sndbuf_setmap 7a70000, 1000; 0xc115c000 -> 7a70000
pcm0: sndbuf_setmap 7a52000, 1000; 0xc115e000 -> 7a52000
pcm0: sndbuf_setmap 7a54000, 1000; 0xc1160000 -> 7a54000
pcm0: sndbuf_setmap 7a57000, 1000; 0xc1163000 -> 7a57000
pcm0: sndbuf_setmap 7a7b000, 1000; 0xc1167000 -> 7a7b000
pcm0: sndbuf_setmap 7a3d000, 1000; 0xc1169000 -> 7a3d000
pci0: <unknown card> (vendor=0x136b, dev=0xff01) at 10.0 irq 9
pci0: <unknown card> (vendor=0x14f1, dev=0x1036) at 11.0 irq 9
pci_cfgintr_linked: linked (61) to hard-routed irq 9
pci_cfgintr: 0:12 INTA routed to irq 9
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 9 at device 12.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: PCI Configuration space:
  0x00: 0x04751180 0x02100007 0x06070080 0x00020000 
  0x10: 0x88000000 0x020000dc 0x00000000 0x00000000 
  0x20: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x30: 0x00000000 0x00000000 0x00000000 0x07200109 
  0x40: 0x8065104d 0x00000001 0x00000000 0x00000000 
  0x50: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x60: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x70: 0x00000000 0x00000000 0x00000000 0x00000000 
  0x80: 0x00a20001 0x00000000 0x04630463 0x30000000 
  0x90: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xa0: 0x00000000 0x00000000 0x000f0000 0x00000000 
  0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 
  0xc0: 0x8065104d 0x00000000 0x00000000 0x00000000 
  0xd0: 0x00000000 0x00000000 0x00000000 0xfe190001 
  0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 
  0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 
pccard0: <PC Card 16-bit bus (classic)> on pcic0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xdc000-0xdffff on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3: iobase=0x0180 altiobase=0x0386 bmaddr=0x0000
ata3 at port 0x180-0x187,0x386 irq 15 on isa0
	using shared irq15.
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 05 50 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: irq maps: 0x201 0x201 0x201 0x201
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 failed to probe at port 0x3f8-0x3ff irq 4 on isa0
ed0 failed to probe at port 0x280-0x29f iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300-0x31f on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
cs0 failed to probe at port 0x300-0x31f on isa0
sn0 failed to probe at port 0x300-0x30f irq 10 on isa0
spic0: device model type = 1
spic0: <Sony Programmable I/O Controller> at port 0x10a0-0x10a4 on isa0
isa_probe_children: probing PnP devices
fwohci0: txd err= 3 miss Ack err
pcic0: Event mask 0x6
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c200, tty 631202, net 671202
bpf: sl0 attached
bpf: faith0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
sbp_post_explore (sbp_cold=2)
ar: FreeBSD check1 failed
ad0: <IBM-DARA-212000/AR4OA53A> ATA-4 disk at ata0-master
ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 15663374, size 15663312 : OK
ad0s2: type 0xe, start 15663375, end = 17767889, size 2104515 : OK
ad0s3: type 0x6, start 17767890, end = 23567354, size 5799465 : OK
start_init: trying /sbin/init
splash: image decoder found: warp_saver
Linux ELF exec handler installed

-------------------------------------------------
$B!!!!!!(BTsubasa Sakamoto$B!J:dK\!!Mc!K(B
$B!AM>M5$HL5BL$O?M@8$N?M@8$?$k=j0J$G$"$k!A(B

 e-mail : tsubasa@himajin2001.com
 www : http://www.himajin2001.com/~sakatuba/
-------------------------------------------------

