From owner-FreeBSD-users-jp@jp.FreeBSD.org Tue Aug 12 08:21:37 2003
Received: (from daemon@localhost)
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) id h7BNLbJ23685;
	Tue, 12 Aug 2003 08:21:37 +0900 (JST)
	(envelope-from owner-FreeBSD-users-jp@jp.FreeBSD.org)
Received: from ns.kobe1995.net (kaz@219.117.208.10.user.rb.il24.net [219.117.208.10])
	by castle.jp.FreeBSD.org (8.11.6p2+3.4W/8.11.3) with ESMTP/inet id h7BNLWT23680
	for <FreeBSD-users-jp@jp.FreeBSD.org>; Tue, 12 Aug 2003 08:21:34 +0900 (JST)
	(envelope-from kaz@kobe1995.net)
Received: (from kaz@localhost)
	by ns.kobe1995.net (8.8.8/3.7W-primary) id IAA04507;
	Tue, 12 Aug 2003 08:21:31 +0900 (JST)
To: FreeBSD-users-jp@jp.FreeBSD.org
In-Reply-To: Your message of "Mon, 26 May 2003 09:08:45 +0900".
	<ybsaddazi0i.wl@ett.sat.t.u-tokyo.ac.jp>
From: kaz@kobe1995.net (NAKAMURA Kazushi)
X-Mailer: mnews [version 1.22PL6] 2002-07/03(Wed)
Message-ID: <030812082131.M0103997@ns.kobe1995.net>
Reply-To: FreeBSD-users-jp@jp.FreeBSD.org
Precedence: list
Date: Tue, 12 Aug 2003 08:21:31 +0900
X-Sequence: FreeBSD-users-jp 75801
Subject: [FreeBSD-users-jp 75801] Re: IEEE1394
 =?ISO-2022-JP?B?GyRCJUclUCUkJTlGMDpuSnM5cBsoQg==?= EPSONGT-9700F
Sender: owner-FreeBSD-users-jp@jp.FreeBSD.org
X-Originator: kaz@kobe1995.net
X-Distribute: distribute version 2.1 (Alpha) patchlevel 24e+030802

OS$B$r(B5.1R$B$K>e$2$F!"(B/dev/{xpt0,pass0}$B$r(Bchmod g+rw$B$7$F:FD)@o$7$^$7$?!#(B

In article <ybsaddazi0i.wl@ett.sat.t.u-tokyo.ac.jp>
simokawa@sat.t.u-tokyo.ac.jp writes:
>> >1. $B$*;H$$$N(B USB $B%G%P%$%9$N@5<0L>>N!"%a!<%+!<!#$G$-$l$P@=IJ$X$N(B URL$B$b!#(B
>> $B%a!<%+!<(B: EPSON
>> $B>&IJL>(B: GT-9700F
>> 
>> >2. $B$*;H$$$N(B OS $B$N(B $B%P!<%8%g%s!"$D$^$j(B uname -r$B$N7k2L(B
>> >    ($B$G$-$l$P(B-CURRENT$B!"(B-STABLE $B$N>l9g$O$$$D$N(B cvsup $B$7$?$+$b(B)$B!#(B
>> % uname -rs
FreeBSD 5.1-RELEASE

>> >3. IEEE1394 $B%G%P%$%9$rG'<1$7$F$$$k$H$3$m$N(B dmesg
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=3, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc1, gen=3, CYCLEMASTER mode
fwohci0: txd err= 0 No stat
fw_xfer_done: pending
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
firewire0: New S400 device ID:0000480000055148
fw_attach_dev: 1 pending handlers called

>> >4. usbdevs -v $B$N7k2L(B($B$3$l$OBgJQ=EMW$G$9!#$H$$$&$N$b!"@=IJ$r%f%K!<%/$K7hDj$G$-$k$+$i$G$9(B)
>fwcontrol -d node_id $B$N7k2L$G$9$+$M(B.
>($B;d$O;}$C$F$$$k$N$G(B, $BFC$KI,MW$"$j$^$;$s$,(B)
$B$H$N$3$H$J$N$G!"Be$o$j$K(B
% camcontrol devlist
<EPSON GT-9700 1.05>               at scbus0 target 0 lun 0 (pass0)
% camcontrol nego 0:0:0
Current Parameters:
(pass0:sbp0:0:0:0): disconnection is enabled
(pass0:sbp0:0:0:0): tagged queueing is enabled

>> >5. $BF0:n$7$?$+!"$7$J$$$+!#F0:n$7$J$/$F$b>pJs$H$7$F$O=EMW$G$9(B!!
$BF0:n$7$J$$!#(B
sane$B$G;H$($J$$!#(B
% sane-find-scanner

found SCSI processor "EPSON GT-9700 1.05" at /dev/pass0
  # Your SCSI scanner was detected. It may or may not be supported by SANE. Try
...
$B!t$,=P$k$h$&$K$J$C$?!#(B

% scanimage -L
device `epson:/dev/pass0' is a Epson GT-9700 flatbed scanner
$B!t$3$3$^$G$ONI$5$=$&!#(B

% scanimage
scanimage: sane_start: Invalid argument
$B!t7k6I!"BLL\!#(Bxscanimage$B$bF1MM!#(B

% xsane
$B!t!V%W%l%S%e!<$r<hF@!W%\%?%s$r2!$9(B
$B!V!_%9%-%c%J$N3+;O$K<:GT$7$^$7$?!'IT@5$J0z?t$G$9!%!W(B

>> >6. $BB>$K5$$K$J$kE@!"Cm0UE@$K$D$$$F!#(B
>camcontrol devlist
>$B$G(B scanner $B$,=P$F$/$l$P(B, sbp $BE*$K$OLdBj$J$$$O$:$G$9(B.
>$B=P$F$3$J$1$l$P(B, devlist -v $B$b$7$F$_$F$/$@$5$$(B.
devlist$B$K$O=P$FMh$k$h$&$K$J$C$?$s$G$9$,$M!#$A$J$_$K:#2s$N(BPC$B$N(Bdmesg.

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT 2003
    root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0709000.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc070926c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc070931c.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc07093c8.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc0709474.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0709524.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 1110970407 Hz
CPU: AMD Athlon(tm) Processor (1110.97-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 528416768 (503 MB)
avail memory = 505647104 (482 MB)
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT AMIINI09> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f7d60
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <RF5C475 PCI-CardBus Bridge> irq 10 at device 9.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <Texas Instruments TSB12LV26> mem 0xdfff8000-0xdfffbfff,0xdffff800-0xdfffffff irq 12 at device 10.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:30:95:26:50:00:4a:56
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:95:00:4a:56
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
bktr0: <BrookTree 878> mem 0xdfcff000-0xdfcfffff irq 10 at device 11.0 on pci0
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
pci0: <multimedia> at device 11.1 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xec00-0xec1f irq 11 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xe800-0xe81f irq 10 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: vendor 0x055d product 0x1030, rev 1.00/0.04, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe400-0xe4ff irq 12 at device 17.5 on pci0
pcm0: <Avance Logic ALC101 AC97 Codec>
rl0: <RealTek 8139 10/100BaseTX> port 0xe000-0xe0ff mem 0xdffff700-0xdffff7ff irq 12 at device 19.0 on pci0
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:20:ed:6f:e4:4a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
acpi_button1: <Sleep Button> on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROMs> at iomem 0xcc000-0xccfff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
ad0: 156334MB <Maxtor 4R160L0> [317632/16/63] at ata0-master UDMA133
acd0: CD-RW <BCO4016IM> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
-- 
$BCfB<OB;V!w?@8M(B		<mailto:kaz@kobe1995.net>
NAKAMURA Kazushi@KOBE	<http://kobe1995.jp/>
- Be Free(BSD), or Die...
