U-Boot 1.1.6-JNPR-2.0 (Build time: Nov 17 2010 - 07:04:52)

SRX_100_LOWMEM board revision major:0, minor:0, serial #: AT3711AFXXXX
OCTEON CN5020-SCP pass 1.1, Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM:  512 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash:  4 MB
USB:   scanning bus for devices... 3 USB Device(s) found
       scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM....... done
BIST check passed.
Boot Media: nand-flash usb
Net:   pic init done (err = 0)octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (244960 bytes)
Loading .rodata @ 0x8f03bd58 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f3cc (16648 bytes)
Loading set_Xcommand_set @ 0x8f0434d4 (100 bytes)
Loading .rodata.cst4 @ 0x8f043538 (20 bytes)
Loading .data @ 0x8f044000 (5608 bytes)
Loading .data.rel.ro @ 0x8f0455e8 (120 bytes)
Loading .data.rel @ 0x8f045660 (136 bytes)
Clearing .bss @ 0x8f0456e8 (11656 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 2.0

FreeBSD/MIPS U-Boot bootstrap loader, Revision 2.0
(builder@warth.juniper.net, Wed Nov 17 07:07:32 UTC 2010)
Memory: 512MB
[0]Booting from nand-flash slice 2
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0x9f9df8+0xeeb30 syms=[0x4+0x7e850+0x4+0xb51d2]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000d8 ...
getbootinfo: magic 0x0 md 0x80d1e000 memsize 0x0
getbootinfo: boothowto 0x1000 kernend 0x80e00000 memsize 512MB kernelname /kernel

Platform Starting
init regular console
Initializing octeon watchdog
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
getmemsize: msgbufp[size=32768] = 0x8000cfe4
Copyright (c) 1996-2011, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 10.4R7.5 #0: 2011-09-08 07:12:35 UTC
    builder@warth.juniper.net:/volume/build/junos/10.4/release/10.4R7.5/obj-octeon/bsd/sys/compile/JSRXNLE
JUNOS 10.4R7.5 #0: 2011-09-08 07:12:35 UTC
    builder@warth.juniper.net:/volume/build/junos/10.4/release/10.4R7.5/obj-octeon/bsd/sys/compile/JSRXNLE
real memory  = 536870912 (512MB)
avail memory = 304791552 (290MB)
cpuid: 0, btlb_cpumap:0xffffffff
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
Initializing watchdog interupt

Loading RT Fifo module.....
Loaded RT Fifo module
pmap_helper loaded (interface version 6, syscall 210)
cpu0 on motherboard
: CAVIUM's Octeon CPU Rev. 0.1 with no FPU implemented
        L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
        L2 Cache: Size 128kb, ? way
obio0 on motherboard
uart0: <Octeon-16550 channel 0> on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: <Synopsis DWC OTG Controller Driver> on obio0
usb0: DWC OTG Controller
Using DMA mode
Init: Port Power? op_state=1
Init: Power Port (0)
usb0: <USB Bus for DWC OTG Controller> on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 2 ports with 1 removable, self powered
umass0: STMicroelectronics ST72682  High Speed Mode, rev 2.00/2.10, addr 3
pcib0: <Cavium on-chip PCI bridge> on obio0
Disabling Octeon big bar support
PCI Status: PCI 32-bit: 0xc041b
pcib0: Initialized controller
pci0: <PCI bus> on pcib0
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pci0: <serial bus, USB> at device 2.2 (no driver attached)
cpld0 on obio0
gblmem0 on obio0
octpkt0: <Octeon RGMII> on obio0
cfi0: <AMD/Fujitsu - 4MB> on obio0
platform_cookie_read not implemented
Timecounter "mips" frequency 500000000 Hz quality 0
Timecounters tick every 1.000 msec
Loading the NETPFE ethernet module
Loading E1/T1/J1 driver
Loading the DS1/E1 Media Layer; Attaching to media services layer
Loading common multilink module.
Loading the NETPFE PPPoE module
Loading the netpfe services driver
Loading the NETPFE docsis module
Loading DS0 driver
Loading the DS0 Media Layer; Attaching to media services layer
Loading the XDSL Media Layer; Attaching to media services layer
Loading the IPSec driver
 Loading the PTM driver
Loading the ISDN driver

Loading the ISDN BRI Media Layer; Attaching to media services layer
Loading Link Services PICs module.
IPsec: Initialized Security Association Processing.
SMP: AP CPU #1 Launched!
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to create bootdev, rootpartition da0s2a
Trying to mount root from ufs:/dev/da0s2a
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md0...

Media check on da0
Automatic reboot in progress...
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 40747 free (35 frags, 5089 blocks, 0.0% fragmentation)
Verified junos signed by PackageProduction_10_4_0
Verified jboot signed by PackageProduction_10_4_0
Verified junos-10.4R7.5-domestic signed by PackageProduction_10_4_0
** /dev/bo0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12432 free (24 frags, 1551 blocks, 0.2% fragmentation)
** /dev/bo0s3f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 171875 free (131 frags, 21468 blocks, 0.1% fragmentation)
Loading configuration ...
mgd: commit complete
Setting initial options:  debugger_on_panic=NO debugger_on_break=NO.
Starting optional daemons:  usbd.
Doing initial network setup:
.
Initial interface configuration:
additional daemons: eventd.
savecore: /dev/bo0s1b: No such file or directory
savecore: Reboot reason(s): 0x1: power cycle/failure
savecore: no dumps found
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot//kernel;/boot/modules;/modu
Loading the DIALER driver
les
kld netpfe drv: ifpfed_dialer.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
boot.upgrade.uboot="0xBFC00000"
boot.upgrade.loader="0xBFE00000"
Boot media /dev/da0 has dual root support
** /dev/da0s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 40530 free (26 frags, 5063 blocks, 0.0% fragmentation)
Sat Nov 26 23:06:37 UTC 2011

Amnesiac (ttyu0)
